×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Weiand 8126 | Upper Engine Intake Manifold
click to zoom in

Weiand 8126 | Upper Engine Intake Manifold

(No reviews yet) Write a Review
$279.95
Part Number
WEI8126
UPC:
90127661765
Condition:
New
5 customers are viewing this product

video gallery

Description

Don't settle for weak performance. The all new SB Chevy Street Warrior delivers brutal low-end torque and killer horsepower throughout useable RPM range! The battleground has changed in the performance world. Most of the intakes on the market were developed 20+ years ago when typical engines were 283-350 cubic inches. Not so anymore. With the popularity of larger stroker engines and more efficient cylinder head and cam designs came the need for intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, the Street Warrior intake rises to the challenge and delivers the performance to conquer the competition! Want maximum horsepower and torque from today's engines? Choose Street Warrior! ** Designed specifically for 1987-96 with iron head Small Block Chevy Gen I engine applications

BRAND: Weiand

FEATURES:

  • Holley Performance Emission Code 3: This part is legal for sale and use on Uncontrolled (Non-Emissions Controlled) Vehicles and Racing Use Only Vehicles. The following vehicles are considered Uncontrolled (Non-Emissions Controlled) Vehicles: 1965 and older U.S. manufactured California Certified vehicles/1967 and older U.S. manufactured Federally Certified vehicles/1967 and older Foreign manufactured vehicle. The following vehicles are considered Racing Use Only Vehicles: Racing Use Only Vehicles are vehicles that are used exclusively for competition and that are not registered and that may never be used on the street. WARNING: It is against the law to install this part on an Emissions Controlled Vehicle. The following vehicles are considered Emissions Controlled Vehicles: 1966 and newer U.S. manufactured California Certified vehicles/1968 and newer U.S. manufactured Federally Certified vehicles/1968 and newer Foreign manufactured vehicle
  • Height Front 3.50 in.; Rear 4.50 in.
  • Runner Geometry Optimized Uses Computational Fluid Dynamics Softw
  • Univ. Dual Pattern Carb Flange Accepts Spread/Square Bore Carbs
  • Don t settle for weak performance. The a
  • Low Rise Dual Plane Design Delivers Friendly Power
  • Low Rise Design Delivers Torque Across The Usable RPM Range
  • Optimized Design For Todays Hight Output Small Block Engines
  • Sand Cast 319 Alum. Construction is CNC Machined
  • Street Warrior™ Intake Manifold
  • Street Warrior™ Intake Manifold; Power Band Idle-5500 RPM; Low Rise; w/Gen 1 SB Chevy Iron Heads; Square/Spread Bore; 3.50 in. Front H/4.50 in. Rear Height; Satin Finish;
  • Idle-5500 RPM Power Band

SPECIFICS:

ConstructionCast
Cylinder Head TypeRectangular Port
EmissionN/A
Engine Make/SizeChevy Small Block V8
FinishSatin
Front Height3.500 in.
Fuel System TypeCarb
Manifold TypeLow Rise
Number of CarbsNone; For Fuel Injection
PositionUpper
Rear Height4.500 in.
RPM RangeIdle-5500
UsageStreet/Strip
WARNING CA Proposition 65No

Power Band Idle-5500 RPM; Low Rise; w/Gen 1 SB Chevy Iron Heads; Square/Spread Bore; 3.50 in. Front H/4.50 in. Rear Height; Satin Finish

DOWNLOADS:

APPLICATIONS:

  • 1993-1993 Cadillac Fleetwood - Position: Upper
  • 1987-1992 Chevrolet Camaro - Position: Upper
  • 1990-1992 Cadillac Brougham - Position: Upper
  • 1987-1991 Chevrolet Corvette - Position: Upper
  • 1991-1992 Oldsmobile Custom Cruiser - Position: Upper
  • 1992-1993 Cadillac Commercial Chassis - Position: Upper
  • 1987-1992 Pontiac Firebird - Position: Upper
  • 1991-1993 Buick Roadmaster - Position: Upper
  • 1991-1992 Buick Commercial Chassis - Position: Upper
  • 1989-1993 Chevrolet Caprice - Position: Upper

Attributes
Product type:
Aftermarket
Features and Benefits:
Dont settle for weak performance. The all new SB Chevy Street Warrior delivers brutal low-end torque and killer horsepower throughout useable RPM range! The battleground has changed in the performance world. Most of the intakes on the market were dev
Features and Benefits:
Runner Geometry Optimized Uses Computational Fluid Dynamics Softw
Features and Benefits:
Sand Cast 319 Alum. Construction is CNC Machined
Features and Benefits:
Low Rise Dual Plane Design Delivers Friendly Power
Features and Benefits:
Low Rise Design Delivers Torque Across The Usable RPM Range
Features and Benefits:
Height Front 3.50 in.; Rear 4.50 in.
Features and Benefits:
Optimized Design For Todays Hight Output Small Block Engines
Features and Benefits:
Idle-5500 RPM Power Band
Features and Benefits:
Univ. Dual Pattern Carb Flange Accepts Spread/Square Bore Carbs
Brand Description:
Street Warrior™ Intake Manifold
Product Description:
Street Warrior™ Intake Manifold; Upper; Power Band Idle-5500 RPM; Low Rise; w/Gen 1 SB Chevy Iron Heads; Square/Spread Bore; 3.50 in. Front H/4.50 in. Rear Height; Satin Finish;
Engine Make/Size:
Chevy Small Block V8
Finish:
Satin
WARNING CA Proposition 65:
No
Usage:
Street/Strip
Position:
Upper
Construction:
Cast
Cylinder Head Type:
Rectangular Port
Emission:
N/A
Front Height:
3.500 in.
Fuel System Type:
Carb
Manifold Type:
Low Rise
Number of Carbs:
None; For Fuel Injection
Rear Height:
4.500 in.
RPM Range:
Idle-5500
Short Description:
Intake Manifold
Hazardous Material:
No
Minimum Order Quantity:
1
Life Cycle Status:
Available to Order
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Weight - Each (Gross Pounds):
14.0500
Item Level GTIN:
00090127661765
Height - Each (Inch):
7.1000
Quantity Per Application:
1
Length - Each (Inch):
25.1000
Width - Each (Inch):
12.0000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top