×
close
click to zoom in

ACDelco 177-0963 | Front Disc Brake Rotor

(No reviews yet) Write a Review
$90.89
Part Number
ACD177-0963
UPC:
00808709275596
Condition:
New
5 customers are viewing this product
ACDelco GM Original Equipment Disc Brake Rotors are metal discs mounted to the wheel hub where the caliper can press the brake pads against the disc surfaces to slow the vehicle, and are GM-recommended replacements for your vehicle's original components. These disc brake rotors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Buick;Cadillac;Chevrolet;Oldsmobile;Pontiac
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Inspected for balance, resulting in smooth brake operation and noise reduction
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE

SPECIFICS:

ABS Sensor Ring IncludedNo
Bolt Hole Quantity5
ConstructionFull Cast
Disc FinishCoated
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Grade TypeRegular
Hat FinishCoated
Height (in)3.38
Length (in)13.12
MaterialCast Iron
Programming RequiredNo
Rust Resistant CoatingYes
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Visible ridges or deep grooves on the rotor surface.
SlottedNo
Solid Or Vented Type RotorVented
Surface TypeSmooth
Weight (lb)20
Width (in)12.38

DOWNLOADS:

APPLICATIONS:

  • 1998-1999 Buick LeSabre - Position: Front
  • 2004-2004 Cadillac DeVille - Position: Front
  • 1997-1998 Pontiac Trans Sport - Position: Front
  • 2005-2005 Chevrolet Impala - Position: Front
    • 2nd Design FOR VEHICLES WITH VIN 59143076 & LATER. MUST ONLY USE T/W 19152666 PAD KIT)(FOR 1ST DES SEE 19202731
  • 2005-2005 Cadillac DeVille - Position: Front
    • 2nd Design FOR VEHICLES WITH VIN 1G6KD54X25U129029 & LATER, MUST ONLY USE T/W 19152666 PAD KIT)(FOR 1ST DES SEE 19202731
  • 2003-2005 Chevrolet Venture - Position: Front
    • Cast Iron
  • 2005-2005 Buick LeSabre - Position: Front
    • PAINTED AL WHL(N73), AL WHL(PY1), CHROME WHL(P05), ALUM WHL(QC4) 2nd Design VEH W/VIN 5U129026 & LATER, MUST ONLY USE T/W 19152666 PAD KIT)(FOR 1ST DES SEE 19202731
  • 2005-2005 Chevrolet Impala - Position: Front
    • 2nd Design FOR VEHICLES WITH VIN 59148924 & LATER. MUST ONLY USE T/W 19152666 PAD KIT)(FOR 1ST DES SEE 19202731
  • 1999-2002 Oldsmobile Intrigue - Position: Front
  • 1999-2005 Pontiac Montana - Position: Front
  • 1997-2004 Chevrolet Venture - Position: Front
  • 2005-2005 Buick Park Avenue - Position: Front
  • 1998-2005 Pontiac Bonneville - Position: Front
  • 1998-1999 Oldsmobile 88 - Position: Front
  • 2005-2005 Chevrolet Monte Carlo - Position: Front
    • 2nd Design FOR VEHICLES WITH VIN 59148924 & LATER. MUST ONLY USE T/W 19152666 PAD KIT)(FOR 1ST DES SEE 19202731
  • 1997-2003 Pontiac Grand Prix - Position: Front
  • 2005-2005 Pontiac Bonneville - Position: Front
    • 2nd Design FOR VEHICLES WITH VIN 1G2HZ54Y45U129028 & LATER, MUST ONLY USE T/W 19152666 PAD KIT)(FOR 1ST DES SEE 19202731
  • 2005-2005 Chevrolet Monte Carlo - Position: Front
    • 2nd Design FOR VEHICLES WITH VIN 59143076 & LATER. MUST ONLY USE T/W 19152666 PAD KIT)(FOR 1ST DES SEE 19202731
  • 1998-1998 Oldsmobile Intrigue - Position: Front
    • Light Duty Brakes
  • 2003-2005 Pontiac Montana - Position: Front
    • Cast Iron
  • 1997-1998 Buick Century - Position: Front
  • 1998-1999 Oldsmobile LSS - Position: Front
  • 2004-2004 Buick LeSabre - Position: Front
    • STYLED ALUMINUM WHEEL(N66), PAINTED AL WHL(N73), ALUM WHL(PY0), AL WHL(PY1), CHROME WHL(P05)
  • 1998-1998 Oldsmobile Regency - Position: Front
  • 1997-1998 Buick Regal - Position: Front
  • 1997-2004 Oldsmobile Silhouette - Position: Front
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Brand Description:
Front Brake Rotor
Product Description:
Front Disc Brake Rotor
ABS Tone Ring Included:
No
Grade Type:
Regular
Bolt Hole Quantity:
5
Rust Resistant Coating:
Yes
Construction:
Full Cast
Material:
Cast Iron
Slotted:
No
Solid Or Vented Type Rotor:
Vented
Surface Type:
Smooth
Hat Finish:
Coated
Disc Finish:
Coated
Programming Required:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - Bullet 4:
Manufactured to GM OE specification for fit, form, and function
Features & Benefits - Bullet 3:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 1:
Inspected for balance, resulting in smooth brake operation and noise reduction
Weight (lb) (Pound):
20
Life Cycle Status:
Discontinued
Height (in) (Inch):
3.38
Life Cycle Status Description:
Discontinued - Part is being removed from the product line.
Width (in) (Inch):
12.38
Item Level GTIN:
00808709275596
Length (in) (Inch):
13.12
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges or deep grooves on the rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Country of Origin:
United States
Weight - Each (Gross Pounds):
20.00
Height - Each (Inch):
03.62
Length - Each (Inch):
13.12
Width - Each (Inch):
12.50



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top