×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 177-0980 | Front Disc Brake Rotor
click to zoom in

ACDelco 177-0980 | Front Disc Brake Rotor

(No reviews yet) Write a Review
$76.49
Part Number
ACD177-0980
UPC:
707773549599
Condition:
New
5 customers are viewing this product

video gallery

Description

ACDelco GM Original Equipment Disc Brake Rotors are metal discs mounted to the wheel hub where the caliper can press the brake pads against the disc surfaces to slow the vehicle, and are GM-recommended replacements for your vehicle's original components. These disc brake rotors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Buick;Cadillac;Chevrolet;Oldsmobile;Pontiac
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Inspected for balance, resulting in smooth brake operation and noise reduction
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE

SPECIFICS:

ABS Sensor Ring IncludedNo
Bolt Circle Diameter (in)4.64
Bolt Circle Diameter (mm)118
Bolt Hole Quantity5
ConstructionFull Cast
Disc FinishMachined
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Grade TypeRegular
Hat FinishCoated
Height (in)2
Height (mm)52.2
Length (in)12.3
Lug Quantity5
MaterialCast Iron
Overall Rotor Diameter (mm)302.7 mm
Programming RequiredNo
Rust Resistant CoatingYes
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Visible ridges or deep grooves on the rotor surface.
SlottedNo
Solid Or Vented Type RotorVented
Surface TypeSmooth
Weight (lb)20
Width (in)12.3

DOWNLOADS:

APPLICATIONS:

  • 2005-2005 Chevrolet Impala - Position: Front
    • 1st Design FOR VEHICLES WITH VIN PRIOR TO 59148924, MUST ONLY USE T/W 18045380 PAD KIT)(FOR 2ND DESIGN SEE 19303832
  • 2005-2005 Buick LeSabre - Position: Front
    • PAINTED AL WHL(N73), AL WHL(PY1), ALUM WHL(QC4) 1st Design FOR VEHICLES WITH VIN PRIOR TO 5U129026, MUST ONLY USE T/W 18045380 PAD KIT)(FOR 2ND DESIGN SEE 19303832
  • 2005-2005 Chevrolet Monte Carlo - Position: Front
    • 1st Design FOR VEHICLES WITH VIN PRIOR TO 59148924, MUST ONLY USE T/W 18045380 PAD KIT)(FOR 2ND DESIGN SEE 19303832
  • 1997-2002 Cadillac Eldorado - Position: Front
  • 2005-2005 Pontiac Bonneville - Position: Front
    • 1st Design FOR VEHICLES WITH VIN PRIOR TO 1G2HZ54Y45U129028, MUST ONLY USE T/W 18045380 PAD KIT)(FOR 2ND DESIGN SEE 19303832
  • 1998-2002 Chevrolet Camaro - Position: Front
  • 1997-2002 Cadillac Seville - Position: Front
  • 1997-1999 Buick Riviera - Position: Front
  • 1997-1999 Oldsmobile Aurora - Position: Front
  • 1998-2002 Pontiac Firebird - Position: Front
  • 2005-2005 Cadillac DeVille - Position: Front
    • 1st Design FOR VEHICLES WITH VIN PRIOR TO 1G6KD54X25U129029, MUST ONLY USE T/W 18045380 PAD KIT)(FOR 2ND DESIGN SEE 19303832
  • 2002-2002 Buick LeSabre - Position: Front
    • STYLED ALUMINUM WHEEL(N66), PAINTED AL WHL(N73), WHEEL,CHROME(N98)
  • 2000-2004 Chevrolet Monte Carlo - Position: Front
  • 2003-2003 Buick LeSabre - Position: Front
    • STYLED ALUMINUM WHEEL(N66), PAINTED AL WHL(N73), AL WHL(PY1)
  • 2001-2003 Oldsmobile Aurora - Position: Front
  • 1997-2004 Buick Park Avenue - Position: Front
  • 2000-2001 Buick LeSabre - Position: Front
    • STYLED ALUMINUM WHEEL(N66), PAINTED AL WHL(N73)
  • 1998-1998 Oldsmobile Intrigue - Position: Front
    • Heavy Duty Brakes
  • 2000-2003 Pontiac Bonneville - Position: Front
  • 2005-2005 Chevrolet Impala - Position: Front
    • 1st Design FOR VEHICLES WITH VIN PRIOR TO 59143076, MUST ONLY USE T/W 18045380 PAD KIT)(FOR 2ND DESIGN SEE 19303832
  • 2000-2004 Chevrolet Impala - Position: Front
  • 1997-2003 Cadillac DeVille - Position: Front

Attributes
Product type:
Aftermarket
Brand Description:
Front Brake Rotor
Product Description:
Front Disc Brake Rotor
ABS Tone Ring Included:
No
Grade Type:
Regular
Bolt Hole Quantity:
5
Nominal Thickness (Inch):
1.27
Outside Diameter (Inch):
11.9
Discard Thickness (Inch):
1.208
Rust Resistant Coating:
Yes
Construction:
Full Cast
Material:
Cast Iron
Slotted:
No
Solid Or Vented Type Rotor:
Vented
Surface Type:
Smooth
Hat Finish:
Coated
Disc Finish:
Machined
Lug Quantity:
5
Programming Required:
No
Pad Contact Surface Width (Inch):
2.2
Hazardous Material:
No
Minimum Order Quantity:
1
Life Cycle Status:
Discontinued
Features & Benefits - Bullet 2:
GM-recommended replacement part for your GM vehicle's original factory component
Life Cycle Status Description:
Discontinued - Part is being removed from the product line.
Features & Benefits - Bullet 4:
Manufactured to GM OE specification for fit, form, and function
Item Level GTIN:
00707773549599
Features & Benefits - Bullet 3:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 1:
Inspected for balance, resulting in smooth brake operation and noise reduction
Weight (lb) (Pound):
20
Height (in) (Inch):
2
Width (in) (Inch):
12.3
Length (in) (Inch):
12.3
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges or deep grooves on the rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Outside Diameter (Millimeter):
302.7
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Height (mm) (Millimeter):
52.2
Bolt Circle Diameter (in) (Inch):
4.64
Bolt Circle Diameter (mm) (Millimeter):
118
Discard Thickness (Millimeter):
30.7
Nominal Thickness (Millimeter):
32.26
Pad Contact Surface Width (Millimeter):
56.4
Overall Rotor Diameter (mm):
302.7 mm
Mounting Bolt Hole Circle Diameter (Inch):
4.52
Mounting Bolt Hole Circle Diameter (Millimeter):
115
Country of Origin:
China
Weight - Each (Gross Pounds):
20.00
Height - Each (Inch):
02.70
Length - Each (Inch):
12.30
Width - Each (Inch):
12.30



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top