×
close
click to zoom in

GM Genuine Parts 177-1008 | Front Disc Brake Rotor

(No reviews yet) Write a Review
$98.09
Part Number
ACD177-1008
UPC:
00707773424957
Condition:
New
5 customers are viewing this product

DOWNLOADS:

APPLICATIONS:

  • 2006-2009 Chevrolet Trailblazer - Position: Front
  • 2002-2006 Chevrolet Trailblazer EXT - Position: Front
  • 2004-2007 Buick Rainier - Position: Front
  • 2003-2006 Isuzu Ascender - Position: Front
  • 2004-2005 GMC Envoy XUV - Position: Front
  • 2005-2005 Chevrolet Trailblazer - Position: Front
    • SPORT PERFORMANCE PKG(B4U)
  • 2002-2006 GMC Envoy XL - Position: Front
  • 2005-2005 Saab 9-7x - Position: Front
  • 2005-2005 Isuzu Ascender - Position: Front
    • SPORT PERFORMANCE PKG(B4U)
  • 2005-2005 Buick Rainier - Position: Front
    • SPORT PERFORMANCE PKG(B4U)
  • 2003-2006 Chevrolet SSR - Position: Front
  • 2005-2005 GMC Envoy - Position: Front
    • SPORT PERFORMANCE PKG(B4U)
  • 2008-2009 Saab 9-7x - Position: Front
    • EXCEPT "AERO" PERFORMANCE PKG(WA7)
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Brand Description:
Front Brake Rotor
Product Description:
Front Disc Brake Rotor
ABS Tone Ring Included:
No
Grade Type:
Regular
Bolt Hole Quantity:
6
Nominal Thickness (Inch):
1.142
Outside Diameter (Inch):
12.7
Discard Thickness (Inch):
1.083
Rust Resistant Coating:
Yes
Construction:
Full Cast
Material:
Cast Iron
Slotted:
No
Solid Or Vented Type Rotor:
Vented
Surface Type:
Smooth
Lug Quantity:
6
Programming Required:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
These rotors typically last two times longer, compared to non-FNC rotors, due to improved pad wear behavior
Features & Benefits - Bullet 4:
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
Features & Benefits - Bullet 3:
OE brake components are specifically designed to work with your GM vehicle safety systems
Life Cycle Status:
Announced
Features & Benefits - Bullet 1:
Most GM OE brake rotors sold in the U.S are Ferritic Nitro-Carburized, or FNC rotor
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Weight (lb) (Pound):
22.69
Item Level GTIN:
00707773424957
Height (in) (Inch):
2.1
Width (in) (Inch):
14.5
Length (in) (Inch):
15.12
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges or deep grooves on the rotor surface.
Features & Benefits - Bullet 7:
GM regularly updates production and service part designs to integrate new materials and technologies
Features & Benefits - Bullet 6:
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
Features & Benefits - Bullet 5:
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Outside Diameter (Millimeter):
322.5
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Height (mm) (Millimeter):
53.3
Bolt Circle Diameter (in) (Inch):
5
Bolt Circle Diameter (mm) (Millimeter):
127
Discard Thickness (Millimeter):
27.508
Nominal Thickness (Millimeter):
29.006
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
22.69
Height - Each (Inch):
03.62
Length - Each (Inch):
15.12
Width - Each (Inch):
14.50



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top