ACDelco
ACDelco 177-905 | Front Disc Brake Rotor
Front Disc Brake RotorBRAND: ACDelcoFEATURES:Front Brake RotorAbs Components;Brake;Brake Caliper;Brake Caliper Lubricant;brake care;Brake Fluid;Brake Pad;Brake Parts;Brake Rotor;Brake Shoe;brakes...
ABS Sensor Ring Included | No |
Bolt Hole Quantity | 4 |
Construction | Full Cast |
Disc Finish | Coated |
Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
Grade Type | Regular |
Hat Finish | Coated |
Height (in) | 3.3 |
Length (in) | 13.1 |
Material | Cast Iron |
Programming Required | No |
Rust Resistant Coating | Yes |
Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Vehicle pulls to the left or right when brakes are applied. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Visible ridges or deep grooves on the rotor surface. |
Slotted | No |
Solid Or Vented Type Rotor | Solid |
Surface Type | Smooth |
Weight (lb) | 13.5 |
Width (in) | 12.3 |