×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 177-1046 | Brake Drum
click to zoom in

ACDelco 177-1046 | Brake Drum

(No reviews yet) Write a Review
$52.99
Part Number
ACD177-1046
UPC:
808709095545
Condition:
New
5 customers are viewing this product

video gallery

Description

ACDelco GM Original Equipment Brake Drums are cylinder shaped bowls where the wheel cylinder presses the brake shoes outward against the inside of the drum. Drums are typically found on older vehicles and on the rear axles of trucks and some cars. These original equipment brake drums are manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • brake-pad;-brake-shoe;rotors;drum;brake-job;front-brake;rear-brake;cylider;hydraluic;dot-3;dot-4;front-brakes;rear-brakes;brake-set;breaks
  • Chevrolet
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Have a rust-preventative coating to help protect against corrosion
  • Inspected for balance, resulting in smooth brake operation and noise reduction
  • Manufactured to GM OE specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE
  • Rear Brake Drum

SPECIFICS:

Bolt Circle Diameter (in)4.13
Bolt Circle Diameter (mm)105
Drum Center Bore Diameter (in)2.36
Drum Center Bore Diameter (mm)60.02
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)3.3
Length (in)13.1
Mount Hole Diameter (in)0.551 in
Mount Hole Diameter (mm)14 mm
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Squealing or scraping noises.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Brake pedal pulsation (not to be confused with normal ABS operation).
Width (in)12.3

FRONT DISC/RR DRUM ANTI-LOCK BRAKES(J93)

APPLICATIONS:

  • 2011-2014 Chevrolet Cruze - Position: Rear Left
  • 2016-2016 Chevrolet Cruze Limited - Position: Rear
  • 2015-2015 Chevrolet Cruze - Position: Rear
  • 2011-2014 Chevrolet Cruze - Position: Rear Right

Attributes
Product type:
Aftermarket
Brand Description:
Rear Brake Drum
Bolt Hole Quantity:
5
Outside Diameter (Inch):
11.73
Material:
Cast Iron
Inside Diameter (Inch):
9.99
Programming Required:
No
Brake Surface Finish:
Non-Directional
Outer Cooling Fins:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Have a rust-preventative coating to help protect against corrosion
Features & Benefits - Bullet 4:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3:
GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - Bullet 1:
Inspected for balance, resulting in smooth brake operation and noise reduction
Weight (lb) (Pound):
15.69
Height (in) (Inch):
3.3
Width (in) (Inch):
12.3
Length (in) (Inch):
13.1
Signs of Wear & Troubleshooting - Section 1 - Bull:
Squealing or scraping noises.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Life Cycle Status:
Announced
Features & Benefits - Bullet 5:
Manufactured to GM OE specification for fit, form, and function
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Item Level GTIN:
00808709095545
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Inside Diameter (Millimeter):
254
Outside Diameter (Millimeter):
298
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Mount Hole Diameter (in):
0.551 in
Mount Hole Diameter (mm):
14 mm
Bolt Circle Diameter (in) (Inch):
4.13
Bolt Circle Diameter (mm) (Millimeter):
105
ABS Sensor Ring Included:
No
Drum Center Bore Diameter (in) (Inch):
2.36
Drum Center Bore Diameter (mm) (Millimeter):
60.02
Country of Origin:
Korea
Weight - Each (Gross Pounds):
15.69
Height - Each (Inch):
03.30
Length - Each (Inch):
13.10
Width - Each (Inch):
12.30



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top