×
close
click to zoom in

ACDelco 18103L | HVAC Heater Hose

(No reviews yet) Write a Review
$30.59
Part Number
ACD18103L
UPC:
00021625240145
Condition:
New
5 customers are viewing this product
ACDelco Professional, premium aftermarket Molded Heater Hoses are specially designed, factory-molded hoses to fit today's smaller, tighter-fitting engine compartments. The hoses are GM OE style, meaning they are molded into the GM Original Equipment style and shape. The hoses are composed of a proprietary blend of EPDM rubber, which is a superior blend of synthetic rubber that is more pliable, ensures a longer hose life, and helps resist electrochemical degradation (ECD), the leading cause of hose failure. ACDelco Professional Molded Heater Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and can be used for coolant, water, and air applications and are also approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded heater hoses are manufactured to meet your expectations for fit, form, and function. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
  • Has all the quality features of a regular coolant hose for interchangeable use
  • Installs without buckling, bending out of shape, or straining at the connection for easy installation
  • Its diameter ranges from 1/4 in to 1 in to fit different types of vehicles
  • Jeep;Saturn
  • Less than 500 part numbers cover more than 1,200 applications to maximize coverage and reduce inventory

SPECIFICS:

Branch Quantity0
Clamps IncludedNo
ColorBlack
Contains SpringNo
FAQ - Answer 1Yes, make sure the hose clamps are screwed on tightly when installing.
FAQ - Answer 2Yes - when there's water in the hose. That's why it's important to follow the vehicle manufacturer's recommendation on the use of engine coolant.
FAQ - Answer 3No, use the hose in the way it's listed in the ACDelco belts and hoses catalog.
FAQ - Answer 4Yes, this requires inspection, though. When the engine is cool, squeeze the hoses with your thumb and forefinger near the clamps. Feel for soft or mushy spots. A good hose will have a firm yet pliant feel. Also, Inspect for cracks, nicks, bulges (usually while hot), or a collapsed section in the hose and oil contamination, or fraying near the connection points.
FAQ - Answer 5No
FAQ - Answer 6No
FAQ - Question 1Can an automotive hose detach during use?
FAQ - Question 2Can an automotive hose freeze in the winter?
FAQ - Question 3Can I use the same automotive hose for multiple uses?
FAQ - Question 4Will I know when it is time to replace an automotive hose?
FAQ - Question 5Are there steps I can take to ensure a longer automotive hose life?
FAQ - Question 6Will a worn automotive hose affect gas mileage?
Good Maintenance Practices - Section 1 - Bullet 1Examine hoses every 12 months. Look for leaks, cracks, or rot. Replace when showing signs of wear.
Good Maintenance Practices - Section 1 - Bullet 2Tighten any loose clamps. Replace clamps when replacing hoses.
Good Maintenance Practices - Section 1 - Bullet 3Have cooling system inspected immediately if instrument panel-mounted temperature gauge indicates engine overheating.
Good Maintenance Practices - Section 1 - Bullet 4Periodically remove bugs, leaves, and other debris from the front of the radiator. They can block airflow and substantially reduce cooling efficiency.
Good Maintenance Practices - Section 1 - Bullet 5Though electrochemical degradation occurs from the inside out, you can feel for voids, cracks, or weak spots. Squeeze the hose with your thumb and two or three fingers. If you're not sure, remove the hose and check it visually.
Hose MaterialReinforced Rubber
Hose ShapeMolded Assembly
Length (ft)32.9
MaterialReinforced Rubber
Measurements23/32 in x 32 29/32
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Original Equipment ReplacementYes
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Signs of electrochemical degradation include voids, cracks, or weak spots on the inside of the hose.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Signs of internal heat damage include slight swelling of the hose cover.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Signs of external heat damage include hardening or cracking of the hose cover.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Other signs of wear include oil damage, abrasion damage, brittleness, lack of heat/cooling within the cabin, ozone damage, and leakage of the hose.
Universal Or Specific FitSpecific

DOWNLOADS:

APPLICATIONS:

  • 1999-2000 Jeep TJ - Position: Heater To Thermostat
    • W/Left Hand Drive
  • 2001-2003 Jeep Wrangler - Position: Heater To Thermostat
  • 1997-1998 Jeep TJ - Position: Heater To Thermostat
  • 1999-2000 Jeep Wrangler - Position: Heater To Thermostat
    • W/Left Hand Drive
  • 2004-2007 Saturn Vue - Position: Engine To Tee
    • Cut to fit
  • 1997-1998 Jeep Wrangler - Position: Heater To Thermostat
  • 2004-2006 Jeep TJ - Position: Heater To Pipe
  • 2001-2003 Jeep TJ - Position: Heater To Thermostat
  • 2004-2006 Jeep Wrangler - Position: Heater To Pipe
  • 1997-2001 Jeep Cherokee - Position: Heater Inlet
    • W/Left Hand Drive
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Product Description:
Molded Heater Hose
Universal Or Specific Fit:
Specific
Material:
Reinforced Rubber
Programming Required:
No
Color:
Black
Branch Quantity:
0
End 2 Inside Diameter (Inch):
0.72
Contains Spring:
No
End 1 Inside Diameter (Inch):
0.72
Hose Shape:
Molded Assembly
Clamps Included:
No
Hose Material:
Reinforced Rubber
Measurements:
23/32 in x 32 29/32
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Installs without buckling, bending out of shape, or straining at the connection for easy installation
Features & Benefits - Bullet 4:
Its diameter ranges from 1/4 in to 1 in to fit different types of vehicles
Features & Benefits - Bullet 3:
Has all the quality features of a regular coolant hose for interchangeable use
Features & Benefits - Bullet 1:
Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
Signs of Wear & Troubleshooting - Section 1 - Bull:
Signs of external heat damage include hardening or cracking of the hose cover.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Signs of electrochemical degradation include voids, cracks, or weak spots on the inside of the hose.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Other signs of wear include oil damage, abrasion damage, brittleness, lack of heat/cooling within the cabin, ozone damage, and leakage of the hose.
Item Level GTIN:
00021625240145
Signs of Wear & Troubleshooting - Section 1 - Bull:
Signs of internal heat damage include slight swelling of the hose cover.
FAQ - Question 4:
Will I know when it is time to replace an automotive hose?
FAQ - Answer 2:
Yes - when there's water in the hose. That's why it's important to follow the vehicle manufacturer's recommendation on the use of engine coolant.
FAQ - Question 3:
Can I use the same automotive hose for multiple uses?
FAQ - Question 1:
Can an automotive hose detach during use?
FAQ - Answer 5:
No
FAQ - Question 2:
Can an automotive hose freeze in the winter?
Features & Benefits - Bullet 5:
Less than 500 part numbers cover more than 1,200 applications to maximize coverage and reduce inventory
FAQ - Question 6:
Will a worn automotive hose affect gas mileage?
FAQ - Question 5:
Are there steps I can take to ensure a longer automotive hose life?
FAQ - Answer 1:
Yes, make sure the hose clamps are screwed on tightly when installing.
Good Maintenance Practices - Section 1 - Bullet 1:
Examine hoses every 12 months. Look for leaks, cracks, or rot. Replace when showing signs of wear.
Good Maintenance Practices - Section 1 - Bullet 2:
Tighten any loose clamps. Replace clamps when replacing hoses.
Good Maintenance Practices - Section 1 - Bullet 3:
Have cooling system inspected immediately if instrument panel-mounted temperature gauge indicates engine overheating.
Good Maintenance Practices - Section 1 - Bullet 4:
Periodically remove bugs, leaves, and other debris from the front of the radiator. They can block airflow and substantially reduce cooling efficiency.
FAQ - Answer 3:
No, use the hose in the way it's listed in the ACDelco belts and hoses catalog.
Good Maintenance Practices - Section 1 - Bullet 5:
Though electrochemical degradation occurs from the inside out, you can feel for voids, cracks, or weak spots. Squeeze the hose with your thumb and two or three fingers. If you're not sure, remove the hose and check it visually.
Length (Millimeter):
836
Length (ft) (Foot):
32.9
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
FAQ - Answer 6:
No
Original Equipment Replacement:
Yes
End 2 Inside Diameter (Millimeter):
18
End 1 Inside Diameter (Millimeter):
18
Country of Origin:
United States
Weight - Each (Gross Pounds):
00.72
Height - Each (Inch):
01.40
Length - Each (Inch):
14.60
Width - Each (Inch):
01.40



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top