×
close

ACDelco 18a1214sd | Rear Disc Brake Rotor

(No reviews yet) Write a Review
$81.59
Part Number
ACD18A1214SD
UPC:
00707773905081
Condition:
New
5 customers are viewing this product
Performance Rear Disc Brake Rotor

BRAND: ACDelco

FEATURES:

  • Rear Brake Rotor
  • Abs Components;Brake;Brake Caliper;Brake Caliper Lubricant;brake care;Brake Fluid;Brake Pad;Brake Parts;Brake Rotor;Brake Shoe;brakes care;Caliper;Drums;Durastop Brake Pads;Durastop Brake Parts;Durastop Ceramic Brake Pads;Low Voc Brake Parts Cleaner 15oz;Low Voc Brake Parts Cleaner 16oz;luxury hybrid brake pads;oem Brakes;Pads And Shoes;Rotor;Silicone Brake Lubricant

SPECIFICS:

ABS Tone Ring IncludedNo
ACD_RemanDesNo
AltPA_127_mm18.008
AltPA_130_mm19.05
AltPA_143_mm114.3
AltPA_144_mm294.89
AltPA_25_mm295
AltPA_3070_mm70.7
AltPA_31_mm58.2
AltPA_7577_mm48.8
Bolt Hole Quantity5
ConstructionFull Cast
Disc FinishTurned
Discard Thickness0.709
FAQ - A3Do I have to replace all my brake parts when replacing my brake rotors?
FAQ - A4Do I have to replace my brake rotors after a certain amount of time?
FAQ - Q4No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
FAQ - Q5No, but it is a good idea to inspect your brake rotors at each tire rotation.
FAQ Chart 1PL14_UC_SpecBrakes.jpg
Features & Benefits - B1Match OE vane configuration for reduced brake wear and optimal cooling
Features & Benefits - B2Damped iron metallurgy reduces noise and dissipates heat
Features & Benefits - B3Non-directional rotation eliminates the need for unique left and right designations
Features & Benefits - B4Mill balanced to reduce vibration
Features & Benefits - B5Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features & Benefits - B6Premium aftermarket replacement part
Features & Benefits - B7Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Good Maintenance Practices - S1 B5The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - S1 B6Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - S1 B7Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - S1 B8Inspect the brake lines for rust, punctures or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - S1 B9Check the thickness of your brake pads.
Good Maintenance Practices - S2 B5The following should be conducted by a qualified technician:
Good Maintenance Practices - S2 B6Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - S2 B7Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - S2 B8Inspection of wheel bearings and grease seals.
Good Maintenance Practices - S2 B9Parking brake adjustments (as needed).
Grade TypePERFORMANCE
Hat FinishTurned
Height2.3
MaterialCast Iron
Mkt_BrandQual_NamePerformance
Mkt_State_Warranty_CA24 Months/40,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Nominal Thickness0.75
Outside Diameter11.6
Pad Contact Surface Width1.9
Product DescriptionACDelco Gold (Professional) Performance (Severe Duty) Disc Brake Rotors are a high quality alternative to Original Equipment (OE) parts. These brake rotors provide reliable vehicle braking power. They feature a thickness variation that helps to minimize pedal pulsation, noise, and help to extend brake pad life. These brake rotors meet the SAE standard for structural integrity with OE matched material, delivering guaranteed performance. Black and gray fusion coating provides corrosion protection. These rotors are uniquely designed for off road vehicles, SUVs, trucks, and fleet trucks. ACDelco Gold (Professional) Performance (Severe Duty) Disc Brake Rotors are ready to be installed right out of the box - no machining required. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Programming RequiredNO
Rust Resistant CoatingYes
Signs of Wear & Troubleshooting - S1 B10Braking causes the pedal and/or steering wheel to pulsate/vibrate (not to be confused with normal ABS operation.
Signs of Wear & Troubleshooting - S1 B11Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - S1 B5Brake rotor signs of wear include:
Signs of Wear & Troubleshooting - S1 B6Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - S1 B7Chirping, grinding, or squeaking noises when braking.
Signs of Wear & Troubleshooting - S1 B8Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - S1 B9A low or sinking brake pedal.
SlottedYes
Solid Or Vented Type RotorVENTED
Surface TypeSMOOTH
Vintage_Part_IndicatorN

DOWNLOADS:

APPLICATIONS:

  • 2003-2011 Mercury Grand Marquis - Position: Rear
  • 2003-2004 Mercury Marauder - Position: Rear
  • 2003-2011 Ford Crown Victoria - Position: Rear
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Brand Description:
Rear Brake Rotor
Product Description:
Performance Rear Disc Brake Rotor
Grade Type:
Performance
Bolt Hole Quantity:
5
Nominal Thickness (Inch):
0.75
Outside Diameter (Inch):
11.6
Discard Thickness (Inch):
0.709
Rust Resistant Coating:
Yes
Construction:
Full Cast
Material:
Cast Iron
Slotted:
Yes
Solid Or Vented Type Rotor:
Vented
Surface Type:
Smooth
Hat Finish:
Turned
Disc Finish:
Turned
Programming Required:
No
Pad Contact Surface Width (Inch):
1.9
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Damped iron metallurgy reduces noise and dissipates heat
Features & Benefits - Bullet 4:
Mill balanced to reduce vibration
Life Cycle Status:
Announced
Features & Benefits - Bullet 3:
Non-directional rotation eliminates the need for unique left and right designations
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Features & Benefits - Bullet 1:
Match OE vane configuration for reduced brake wear and optimal cooling
Item Level GTIN:
00707773905081
Height (in) (Inch):
2.3
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Chirping, grinding, or squeaking noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Braking causes the pedal and/or steering wheel to pulsate/vibrate (not to be confused with normal ABS operation.
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges on rotor surface.
FAQ - Answer 2:
No, but it is a good idea to inspect your brake rotors at each tire rotation.
FAQ - Question 1:
Do I have to replace all my brake parts when replacing my brake rotors?
Features & Benefits - Bullet 7:
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Features & Benefits - Bullet 6:
Premium aftermarket replacement part
FAQ - Question 2:
Do I have to replace my brake rotors after a certain amount of time?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake rotor signs of wear include:
Features & Benefits - Bullet 5:
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
FAQ - Answer 1:
No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Outside Diameter (Millimeter):
295
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Center Bore Diameter (in):
2.8 in
Center Bore Diameter (mm):
70.7 mm
Height (mm) (Millimeter):
58.2
Bolt Circle Diameter (in) (Inch):
4.5
Bolt Circle Diameter (mm) (Millimeter):
114.3
ABS Sensor Ring Included:
No
Discard Thickness (Millimeter):
18.008
Nominal Thickness (Millimeter):
19.05
Pad Contact Surface Width (Millimeter):
48.8
Overall Rotor Diameter (mm):
294.89 mm
Country of Origin:
China
Weight - Each (Gross Pounds):
13.80
Height - Each (Inch):
02.80
Length - Each (Inch):
12.30
Width - Each (Inch):
12.30



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top