×
close

ACDelco 18A1839 | Front Disc Brake Rotor

(No reviews yet) Write a Review
$156.59
Part Number
ACD18A1839
UPC:
00707773421000
Condition:
New
5 customers are viewing this product
Front Disc Brake Rotor

BRAND: ACDelco

FEATURES:

  • Front Brake Rotor
  • Abs Components;Brake;Brake Caliper;Brake Caliper Lubricant;brake care;Brake Fluid;Brake Pad;Brake Parts;Brake Rotor;Brake Shoe;brakes care;Caliper;Drums;Durastop Brake Pads;Durastop Brake Parts;Durastop Ceramic Brake Pads;Low Voc Brake Parts Cleaner 15oz;Low Voc Brake Parts Cleaner 16oz;luxury hybrid brake pads;oem Brakes;Pads And Shoes;Rotor;Silicone Brake Lubricant

SPECIFICS:

ABS Tone Ring IncludedNo
ACD_RemanDesNo
AltPA_127_mm33.528
AltPA_130_mm36.576
AltPA_143_mm184.2
AltPA_144_mm381
AltPA_25_mm381
AltPA_3070_mm152.5
AltPA_31_mm112.8
AltPA_7577_mm62
Bolt Hole Quantity10
ConstructionFull Cast
Disc FinishTurned
Discard Thickness1.32
FAQ - A1Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors.
FAQ - Q1Does ACDelco offer other grades of brake rotors?
Features & Benefits - B1Inspected for balance; resulting in smooth brake operation and noise reduction
Features & Benefits - B2Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
Features & Benefits - B3Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
Good Maintenance Practices - S1 B1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - S1 B2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - S1 B3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - S1 B4Check the thickness of your brake pads.
Good Maintenance Practices - S1 HThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - S2 B1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - S2 B2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - S2 B3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - S2 B4Parking brake adjustments (as needed).
Good Maintenance Practices - S2 HThe following should be conducted by a qualified technician:
Grade TypeREGULAR
Hat FinishTurned
Height4.4
Keyword SearchACDelco; ACDelco Disc Brake Rotors; ACDelco Disc Brake Rotors; ACDelco Professional Disc Brake Rotors; Brakes; Braking; Brake Parts; Brake Rotors; Disc Brake Rotors; Brakes; Brake Rotor; Disc Brake Rotor; Professional Brake Rotor; Professional Disc Brake Rotor; Professional Brake Rotor; Professional Disc Brake Rotor; Rotor; ROTOR,FRT BRK; ROTOR,FRT BRK (COATED); ROTOR,FRT BRK(MCHG); ROTOR,FRT BRK(W/HUB); ROTOR,RR BRK; ROTOR,RR BRK (COATED); ROTOR KIT,RR BRK;
Length16.1
Marketing Statement - Product LineBrakes are one area in which vehicle owners simply cannot compromise. With ACDelco Brakes, they can get the peace of mind that comes with parts that are expertly engineered, manufactured to stringent tolerances, thoroughly tested and backed by the ACDelco name. Choose from our GM Original Equipment, Professional, Advantage, and Specialty Series brake products to meet your performance needs and budget. For your GM and non-GM vehicles, trust ACDelco rotors, pads, drums, and other brake components to help keep you and your loved ones safe.
Marketing Statement - Sub BrandACDelco Professional, premium aftermarket, Brake products mean no compromises and quality at a fair price. ACDelco also offers select Specialty Brake products for Fleet and Police applications as well. Whether you call on our brake pads, brake shoes, rotors or drums, you can rest assured that ACDelco will give you the stopping power you need. And, with our warranty coverage, you will have the confidence and peace of mind that comes with owning ACDelco products.
MaterialCast Iron
Mkt_BrandQual_NameFully Coated
Mkt_State_Warranty_CA24 Months/40,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Nominal Thickness1.44
Outside Diameter15
Pad Contact Surface Width2.4
Product DescriptionACDelco Professional Disc Brake Rotors provide reliable vehicle braking power and are a high quality replacement for many vehicles on the road today. They feature a thickness variation that is less than 0.0004 to minimize pedal pulsation, noise, and help to extend brake pad life. These rotors meet the SAE standard for structural integrity with OE matched G3000 qualified material delivering guaranteed performance. Also, no machining is required. ACDelco Advantage Disc Brake Rotors are ready to be installed right out of the box.
Programming RequiredNO
Rust Resistant CoatingYes
Signs of Wear & Troubleshooting - S1 B1Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - S1 B2Squealing or grinding noises.
Signs of Wear & Troubleshooting - S1 B3Low brake pedal height.
Signs of Wear & Troubleshooting - S1 B4Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - S1 B5Visible ridges or deep grooves on the rotor surface.
Signs of Wear & Troubleshooting - S1 HBrake rotor signs of wear include:
SlottedNo
Solid Or Vented Type RotorVENTED
Surface TypeSMOOTH
Vintage_Part_IndicatorN
Weight38.4
Width16.1

DOWNLOADS:

APPLICATIONS:

  • 2002-2008 Kenworth T300 - Position: Front
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 2004-2004 International 4200 - Position: Rear
    • with 4.44in Overall Height Cast In ABS Exciter w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2003-2004 IC Corporation CE School Bus - Position: Rear
    • 4.44" Overall Height Hat Shaped 10 Hole Rotor
  • 2003-2017 Freightliner M2 112 - Position: Front
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 2001-2001 International 4900 - Position: Rear
  • 1998-1998 International 4700 - Position: Rear
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2002-2006 International 4300LP - Position: Rear
    • with 4.44in Overall Height w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2006-2009 Freightliner MT35 - Position: Rear
  • 2008-2010 Peterbilt 335 - Position: Front
    • 10 Hole Rotor Hat 4.43" Overall Height
  • 2003-2010 Freightliner M2 100 - Position: Rear
  • 2006-2007 International 4300 - Position: Front
  • 1994-1997 International 4900 - Position: Front
  • 2002-2002 International 4300 - Position: Rear
  • 1999-2000 International 4900 - Position: Front
  • 1999-2008 Freightliner MT55 - Position: Rear
  • 2002-2002 International 4700 - Position: Front
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1993-1995 International 7100 - Position: Rear
    • with 4.44in Overall Height w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2008-2008 International 4400LP - Position: Front
    • w/ ABS Brakes 3.20" Height Hat Shaped 10 Hole Rotor
  • 2005-2005 International 3300 - Position: Front
  • 2004-2008 Ford F650 - Position: Rear
  • 2001-2001 International 2654 - Position: Front
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1994-1994 International 2574 - Position: Rear
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1996-1997 International 2574 - Position: Rear
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1989-2004 Blue Bird TC2000 - Position: Rear
  • 2010-2012 Peterbilt 337 - Position: Rear
  • 2006-2007 International 4400 - Position: Front
    • with 4.44in Overall Height w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2000-2001 International 2554 - Position: Front
  • 2002-2002 International 4400 - Position: Rear
    • with 4.44in Overall Height w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2004-2012 Freightliner Business Class M2 - Position: Front
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 2006-2019 Freightliner MT45 - Position: Rear
  • 2005-2005 International 4400 - Position: Front
  • 1998-2002 International 3400 - Position: Rear
    • with 4.44in Overall Height Cast In ABS Exciter Hat Shaped 10 Hole Rotor
  • 1992-1993 International 2654 - Position: Front
  • 1995-1995 International 4700 - Position: Front
  • 2008-2017 Kenworth T370 - Position: Front
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 1995-1996 International 2554 - Position: Rear
  • 1998-2004 International 1652SC - Position: Front
  • 2008-2008 International 4400LP - Position: Rear
  • 2006-2007 International 4400 - Position: Rear
  • 2002-2003 International 4200 - Position: Front
    • with 4.44in Overall Height Cast In ABS Exciter w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2011-2014 Ford F53 - Position: Rear
    • 24,000-26,000 lb. GVW
  • 2003-2017 Freightliner M2 106 - Position: Front
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 2005-2005 International 3300 - Position: Rear
    • with 4.44in Overall Height Cast In ABS Exciter Hat Shaped 10 Hole Rotor
  • 1996-1997 International 4700 - Position: Front
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1997-1997 International 2554 - Position: Rear
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 2010-2012 Peterbilt 337 - Position: Front
    • 10 Hole Rotor Hat 4.43" Overall Height
  • 1995-1996 International 2554 - Position: Front
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 2002-2003 International 4200 - Position: Rear
  • 2008-2012 Peterbilt 330 - Position: Rear
  • 2006-2007 International CXT - Position: Rear
  • 1999-2000 International 4900 - Position: Rear
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2003-2009 Freightliner M2 106 - Position: Rear
  • 1999-2000 International 2654 - Position: Rear
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1993-1994 International 4700 - Position: Rear
  • 1994-1994 International 2554 - Position: Rear
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 2002-2006 International 4300LP - Position: Front
  • 1998-2002 International 3400 - Position: Front
  • 1994-1995 International 2654 - Position: Front
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1997-1997 International 2554 - Position: Front
  • 2003-2004 International 4400 - Position: Rear
  • 2003-2007 International 4200LP - Position: Front
  • 1994-1997 International 4900 - Position: Rear
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1996-1996 International 2654 - Position: Rear
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1999-2019 Freightliner MT55 - Position: Front
    • w/ 10 Bolt Holes 4.43" Overall Height
  • 2004-2008 Ford F750 - Position: Rear
  • 2001-2001 International 4900 - Position: Front
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2002-2002 International 4700LP - Position: Front
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1998-1999 International 3600 - Position: Rear
    • with 4.44in Overall Height Cast In ABS Exciter Hat Shaped 10 Hole Rotor
  • 2002-2002 International 4700LP - Position: Rear
  • 2007-2007 International 4100 - Position: Front
    • 10 Hole Drum In Hat Parking Brake 3.20" Height
  • 2008-2012 Peterbilt 325 - Position: Rear
  • 2002-2008 International 4400LP - Position: Front
  • 2008-2017 Kenworth T370 - Position: Rear
  • 2008-2009 Ford F53 - Position: Rear
    • 24,000-26,000 lb. GVW
  • 2003-2008 IC Corporation CE Commercial - Position: Rear
    • 4.44" Overall Height Hat Shaped 10 Hole Rotor
  • 1998-1998 International 4900 - Position: Rear
  • 1994-1994 International 2554 - Position: Front
  • 1993-2001 International 4800 - Position: Front
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1993-2001 International 4700LP - Position: Front
  • 1993-1994 International 4600LP - Position: Rear
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2002-2003 International 4900 - Position: Rear
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1993-2001 International 4700LP - Position: Rear
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1996-2002 International 4700LPX - Position: Front
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1992-1992 International 2654 - Position: Rear
    • From 12/3/92 w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 2006-2006 International 4100 - Position: Front
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1993-1994 International 4700 - Position: Front
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1996-1997 International 4700 - Position: Rear
  • 1997-1998 International 2654 - Position: Front
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1992-1994 International 3700 - Position: Rear
    • with 4.44in Overall Height Hat Shaped 10 Hole Rotor
  • 1993-1999 International 5000 - Position: Front
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 2007-2007 International 4200 - Position: Rear
    • with 4.44in Overall Height Cast In ABS Exciter w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2005-2009 IC Corporation CE Integrated - Position: Rear
    • 4.44" Overall Height Hat Shaped 10 Hole Rotor
  • 2001-2001 International 4700 - Position: Rear
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1996-1996 International 2654 - Position: Front
  • 1998-1999 International 2554 - Position: Front
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1998-1999 International 3000FE - Position: Rear
    • with 4.44in Overall Height Cast In ABS Exciter Hat Shaped 10 Hole Rotor
  • 1989-2004 Blue Bird TC2000 - Position: Front
    • 10 Hole Rotor Cast In ABS Exciter with 4.44in Overall Height
  • 1997-1998 International 2654 - Position: Rear
  • 1993-1998 International 2674 - Position: Front
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 2008-2012 Peterbilt 330 - Position: Front
    • 10 Hole Rotor Hat 4.43" Overall Height
  • 1993-1994 International 4600LP - Position: Front
  • 2003-2003 International 4700 - Position: Rear
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2008-2017 Kenworth T270 - Position: Rear
  • 2003-2004 International 4400 - Position: Front
    • with 4.44in Overall Height w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2011-2017 Freightliner M2 106 - Position: Rear
  • 1993-2001 International 4800 - Position: Rear
  • 2005-2006 International 4200 - Position: Front
    • with 4.44in Overall Height Cast In ABS Exciter w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2008-2015 Kenworth T170 - Position: Front
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 1998-1998 International 4900 - Position: Front
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1999-1999 International 2574 - Position: Front
  • 2008-2010 Peterbilt 335 - Position: Rear
  • 2004-2008 Ford F750 - Position: Front
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 1994-1995 International 2654 - Position: Rear
  • 1999-2000 International 4700 - Position: Front
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1993-1995 International 4600 - Position: Front
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1999-1999 International 2674 - Position: Rear
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1992-1995 International 7100 - Position: Front
  • 2006-2007 International 7400 - Position: Front
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1992-1993 International 2554 - Position: Rear
  • 2007-2007 International 4200 - Position: Front
  • 2003-2004 International 4300 - Position: Front
  • 1999-2000 International 2654 - Position: Front
  • 2002-2005 International 3200 - Position: Rear
    • with 4.44in Overall Height Cast In ABS Exciter Hat Shaped 10 Hole Rotor
  • 1998-1998 International 2574 - Position: Rear
  • 1999-1999 International 2574 - Position: Rear
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1995-1995 International 2574 - Position: Rear
  • 2002-2002 International 4300 - Position: Front
    • with 4.44in Overall Height w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2010-2010 Freightliner M2 106 - Position: Rear
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 1998-2004 Freightliner FL60 - Position: Rear
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 1996-2002 International 4700LPX - Position: Rear
  • 1992-1992 International 2674 - Position: Front
    • From 12/3/92 w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 2007-2007 International 4100 - Position: Rear
  • 1993-1994 International 3900FC - Position: Front
  • 2003-2007 International 4200LP - Position: Rear
    • with 4.44in Overall Height Cast In ABS Exciter w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2006-2019 Freightliner MT45 - Position: Front
    • w/ 10 Bolt Holes 4.43" Overall Height
  • 2002-2003 International 4900 - Position: Front
  • 2005-2006 International 4200 - Position: Rear
  • 2005-2005 International 4300 - Position: Rear
  • 1995-1995 International 4700 - Position: Rear
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2004-2008 Ford F650 - Position: Front
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 2002-2005 International 3200 - Position: Front
  • 2005-2005 International 4300 - Position: Front
    • with 4.44in Overall Height w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1992-1999 International 5000 - Position: Rear
  • 1998-1998 International 2574 - Position: Front
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 2008-2012 Peterbilt 325 - Position: Front
    • 10 Hole Rotor Hat 4.43" Overall Height
  • 1998-1999 International 2554 - Position: Rear
  • 1998-1999 International 3000FE - Position: Front
  • 2005-2005 International 4400 - Position: Rear
    • with 4.44in Overall Height w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2000-2001 International 2554 - Position: Rear
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 2002-2002 International 4700 - Position: Rear
  • 2002-2002 International 4400 - Position: Front
  • 1993-1995 International 4600 - Position: Rear
  • 2001-2001 International 4700 - Position: Front
  • 2001-2001 International 2654 - Position: Rear
  • 2009-2009 Freightliner MT55 - Position: Rear
    • w/ 10 Bolt Holes 4.43" Overall Height
  • 2003-2017 Freightliner M2 112 - Position: Rear
  • 2002-2007 International 4400LP - Position: Rear
    • with 4.44in Overall Height w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1999-2000 International 4700 - Position: Rear
  • 1993-1993 International 4900 - Position: Front
    • w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2002-2008 Kenworth T300 - Position: Rear
  • 1992-1992 International 5000 - Position: Front
    • From 12/3/92 w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 2005-2017 Freightliner M2 - Position: Front
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 2003-2003 International 4700 - Position: Front
  • 2003-2004 International 4300 - Position: Rear
    • with 4.44in Overall Height w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1999-1999 International 2674 - Position: Front
  • 1992-1992 International 7100 - Position: Rear
    • with 4.44in Overall Height From 12/3/92 w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1992-1998 International 2674 - Position: Rear
  • 2004-2012 Freightliner Business Class M2 - Position: Rear
  • 2006-2009 Freightliner MT35 - Position: Front
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 1993-1993 International 2554 - Position: Front
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1995-1995 International 2574 - Position: Front
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1998-1998 International 4700 - Position: Front
  • 1991-2004 International 3800 - Position: Rear
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 2004-2004 International 4200 - Position: Front
  • 2005-2017 Freightliner M2 - Position: Rear
  • 1993-1994 International 3700 - Position: Front
  • 1993-1993 International 4900 - Position: Rear
  • 2010-2019 Freightliner MT55 - Position: Rear
  • 2006-2007 International 4300 - Position: Rear
    • with 4.44in Overall Height w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 2008-2015 Kenworth T170 - Position: Rear
  • 1998-2004 International 1652SC - Position: Rear
    • with 4.44in Overall Height w/ ABS Brakes Hat Shaped 10 Hole Rotor
  • 1998-1999 International 3600 - Position: Front
  • 1992-1992 International 2554 - Position: Front
    • From 12/3/92 w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1994-1994 International 2574 - Position: Front
  • 2003-2010 Freightliner M2 100 - Position: Front
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 2008-2017 Kenworth T270 - Position: Front
    • 4.43" Overall Height Hat Shaped 10 Hole Rotor
  • 1993-1993 International 2654 - Position: Rear
    • w/ ABS Brakes Axle Code 280A, 280B w/ 6,000 to 8,000 lb. Axle
  • 1992-1994 International 3900FC - Position: Rear
    • with 4.44in Overall Height Hat Shaped 10 Hole Rotor
  • 1996-1997 International 2574 - Position: Front
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Brand Description:
Front Brake Rotor
Product Description:
Front Disc Brake Rotor
Grade Type:
Regular
Bolt Hole Quantity:
10
Nominal Thickness (Inch):
1.44
Outside Diameter (Inch):
15
Discard Thickness (Inch):
1.32
Rust Resistant Coating:
Yes
Construction:
Full Cast
Material:
Cast Iron
Slotted:
No
Solid Or Vented Type Rotor:
Vented
Surface Type:
Smooth
Hat Finish:
Turned
Disc Finish:
Turned
Programming Required:
No
Pad Contact Surface Width (Inch):
2.4
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Independently tested with Noise/Vibration/Harshness (NVH) and durability/wear testing; resulting in high quality and reliable products
Features & Benefits - Bullet 4:
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Life Cycle Status:
Announced
Features & Benefits - Bullet 3:
Follows original manufacturers' designs for dispersing heat, helping to prolong pad and rotor life while reducing noise and vibration
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Features & Benefits - Bullet 1:
Inspected for balance; resulting in smooth brake operation and noise reduction
Item Level GTIN:
00707773421000
Weight (lb) (Pound):
38.4
Height (in) (Inch):
4.4
Width (in) (Inch):
16.1
Length (in) (Inch):
16.1
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges or deep grooves on the rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
FAQ - Question 1:
Does ACDelco offer other grades of brake rotors?
Features & Benefits - Bullet 6:
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Features & Benefits - Bullet 5:
Premium aftermarket replacement part
FAQ - Answer 1:
Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Outside Diameter (Millimeter):
381
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Center Bore Diameter (in):
6 in
Center Bore Diameter (mm):
152.5 mm
Height (mm) (Millimeter):
112.8
Bolt Circle Diameter (in) (Inch):
7.3
Bolt Circle Diameter (mm) (Millimeter):
184.2
ABS Sensor Ring Included:
No
Discard Thickness (Millimeter):
33.528
Nominal Thickness (Millimeter):
36.576
Pad Contact Surface Width (Millimeter):
62
Overall Rotor Diameter (mm):
381 mm
Country of Origin:
China
Weight - Each (Gross Pounds):
38.40
Height - Each (Inch):
05.60
Length - Each (Inch):
16.10
Width - Each (Inch):
16.10



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top