×
close

ACDelco 18E1408 | Rear Drum Brake Wheel Cylinder

(No reviews yet) Write a Review
$26.34
Part Number
ACD18E1408
UPC:
00707773847756
Condition:
New
5 customers are viewing this product
ACDelco Professional Drum Brake Wheel Cylinders use both aluminum and iron castings making them a high quality replacement for many vehicles on the road today. These wheel cylinders contain both Ethylene Propylene (EPDM) and Styrene Butadiene (SBR) rubber components to provide superior resistance to heat, corrosion, and leakage. Formulated with a smooth bore finish, these cylinders have a quality seal to help increase the life of rubber components. ACDelco Professional Drum Brake Wheel Cylinders are ready to bench bleed and install right out of the box - no assembly required. These premium aftermarket replacement drum brake wheel cylinders are manufactured to meet your expectations for fit, form, and function. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
  • Chevrolet;GMC
  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
  • Pressure tested to ensure safe and confident braking
  • Trivalent coated bleeder screws provide extra protection and added durability

SPECIFICS:

Attachment TypeBolted
Bleeder Screw Cap IncludedYes
Bleeder Screw IncludedYes
Casting MaterialCast Iron
FAQ - Answer 1No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
FAQ - Answer 2Yes, ACDelco also offers GM OE brake cylinders.
FAQ - Answer 3Yes, ACDelco Professional Brake Cylinders come with a 12 month / unlimited mile warranty.
FAQ - Question 1Do I have to replace all my brake parts when replacing my brake cylinder?
FAQ - Question 2Does ACDelco offer other grades of brake cylinders?
FAQ - Question 3Are these brake parts durable?
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)4.3
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Mount Hole Quantity2
Mounting Hardware IncludedNo
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Brake warning light is on.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake cylinder signs of wear include:
Weight (lb)1.2
Width (in)2.6

DOWNLOADS:

APPLICATIONS:

  • 2008-2009 GMC Sierra 1500 - Position: Rear
    • with 7000lb GVW Vehicles Using Hold Down Pins
  • 2010-2013 GMC Sierra 1500 - Position: Rear
    • with 7000lb GVW
  • 2012-2012 Chevrolet Silverado 1500 - Position: Rear
    • w/ 7,000 lb. GVW
  • 2008-2009 Chevrolet Silverado 1500 - Position: Rear
    • with 7000lb GVW Vehicles Using Hold Down Pins
  • 2011-2011 Chevrolet Silverado 1500 - Position: Rear
    • with 7000lb GVW
  • 2013-2013 Chevrolet Silverado 1500 - Position: Rear
    • with 7000lb GVW
  • 2010-2010 Chevrolet Silverado 1500 - Position: Rear
    • w/ 7,000 lb. GVW
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Brand Description:
Rear Brake Wheel Cylinder
Product Description:
Rear Drum Brake Wheel Cylinder
Mounting Hardware Included:
No
Programming Required:
No
Length (Inch):
3.1
Attachment Type:
Bolted
Bore Diameter (Inch):
1.0625
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Pressure tested to ensure safe and confident braking
Features & Benefits - Bullet 4:
Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
Features & Benefits - Bullet 3:
Trivalent coated bleeder screws provide extra protection and added durability
Features & Benefits - Bullet 1:
Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
Weight (lb) (Pound):
1.2
Height (in) (Inch):
4.3
Width (in) (Inch):
2.6
Signs of Wear & Troubleshooting - Section 1 - Bull:
Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake warning light is on.
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
FAQ - Answer 2:
Yes, ACDelco also offers GM OE brake cylinders.
Life Cycle Status:
Announced
FAQ - Question 3:
Are these brake parts durable?
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Question 1:
Do I have to replace all my brake parts when replacing my brake cylinder?
Item Level GTIN:
00707773847756
FAQ - Question 2:
Does ACDelco offer other grades of brake cylinders?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake cylinder signs of wear include:
FAQ - Answer 1:
No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
FAQ - Answer 3:
Yes, ACDelco Professional Brake Cylinders come with a 12 month / unlimited mile warranty.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Mount Hole Quantity:
2
Bleeder Screw Included:
Yes
Brake Line Inlet Thread Diameter (Inch):
0.393
Brake Line Inlet Thread Diameter (Millimeter):
10
Bore Diameter (Millimeter):
26.9875
Casting Material:
Cast Iron
Bleeder Screw Cap Included:
Yes
Country of Origin:
China
Weight - Each (Gross Pounds):
01.20
Weight - Case (Gross Pounds):
12.00
Height - Each (Inch):
04.30
Height - Case (Inch):
05.70
Length - Each (Inch):
03.10
Length - Case (Inch):
16.10
Width - Each (Inch):
02.60
Width - Case (Inch):
09.60



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top