ACDelco
ACDelco 18FR1293C | Disc Brake Caliper
Rear Passenger Side Disc Brake Caliper Assembly (Friction Ready Coated)BRAND: ACDelcoFEATURES:Brake CaliperAbs Components;Brake;Brake Caliper;Brake Caliper Lubricant;brake care;Brake Fluid;Brake...
Bleeder Thread Diameter | 7/16"-24 |
Caliper Color | Natural |
Caliper Slides Included | No |
Caliper Type | Floating |
Casting Material | Cast Iron |
FAQ - Answer 1 | No, but it is a good idea to inspect them for wear-out, cracking, leaking etc. |
FAQ - Answer 2 | Yes, ACDelco also offers GM OE disc brake calipers. |
FAQ - Answer 3 | No, but it is a good idea to inspect them at every tire rotation. |
FAQ - Question 1 | Do I have to replace all my brake parts when replacing my disc brake calipers? |
FAQ - Question 2 | Does ACDelco offer other grades of disc brake calipers? |
FAQ - Question 3 | Do I have to replace my disc brake calipers after a certain amount of time? |
Finish | Plain |
Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
Grade Type | Performance |
Height (in) | 5.6 |
Inlet Fitting Type | Female |
Length (in) | 13.5 |
Mounting Bracket Included | No |
Mounting Hardware Included | Yes |
Pad Wear Sensor Included | No |
Pads Included | No |
Piston 1 Diameter (in) | 2.9 |
Piston 1 Diameter (mm) | 73.7 |
Piston 2 Diameter (in) | 2.9 |
Piston 2 Diameter (mm) | 73.7 |
Piston Quantity | 2 |
Programming Required | No |
Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Vehicle pulls to the left or right when brakes are applied. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Brake pedal pulsation (not to be confused with normal ABS operation). |
Weight (lb) | 28.5 |
Width (in) | 11.2 |