×
close
click to zoom in

ACDelco 18K1032X | Rear Disc Brake Hardware Kit

(No reviews yet) Write a Review
$22.94
Part Number
ACD18K1032X
UPC:
00707773679142
Condition:
New
5 customers are viewing this product
The ACDelco Professional Disc Brake Hardware Kit contains high quality replacement components for your vehicle's braking system. This kit includes the necessary bolts, fasteners, bushings, and other hardware needed to repair your vehicle's disc brake applications. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Blue Bird;Ford;Freightliner;International;Kenworth;Peterbilt;Sterling Truck
  • Includes necessary hardware for easy installation
  • Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
  • Thoroughly manufactured to meet your expectations for fit, form, and function

SPECIFICS:

Brake Lubricant IncludedNo
ColorNatural
FAQ - Answer 1Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
FAQ - Answer 2Yes, it is a good idea to inspect your brake fluid often.
FAQ - Answer 3Yes, both part offerings are high quality replacement parts.
FAQ - Question 1Are these brake parts durable?
FAQ - Question 2Do I need to check my brake fluid when replacing other brake parts?
FAQ - Question 3Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)1.8
Length (in)7.3
MaterialSteel
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Chirping, grinding, or squeaking noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 6Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake rotor signs of wear include:
Weight (lb)0.29
Width (in)3.3

DOWNLOADS:

APPLICATIONS:

  • 2006-2013 Freightliner MT45 - Position: Rear
  • 2003-2003 International 3200 - Position: Rear
  • 2005-2005 Sterling Truck Acterra 6500 - Position: Rear
  • 2001-2001 International 3600 - Position: Rear
  • 2007-2007 International 4300LP - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-2002 International 4700LPX - Position: Rear
  • 2005-2005 Sterling Truck Acterra 6500 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-1999 International 4900 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2005-2008 Freightliner M2 - Position: Rear
  • 2009-2010 Peterbilt 335 - Position: Rear
  • 2007-2009 Freightliner MT55 - Position: Front
  • 2002-2004 Sterling Truck Acterra 6500 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2008-2009 Ford F53 - Position: Front
  • 2002-2007 International 4200 - Position: Front
  • 2003-2008 Ford F750 - Position: Front
  • 2008-2008 Freightliner M2 106 - Position: Rear
  • 2004-2004 Freightliner M2 112 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2005-2006 International 4300LP - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2001-2001 Sterling Truck Acterra 7500 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1999-1999 International 3400 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2005-2006 International 3300 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2016-2016 Ford F53 - Position: Rear
    • 24,000-26,000 lb. GVW
  • 2014-2014 Ford F53 - Position: Front
  • 2011-2011 Ford F53 - Position: Rear
    • 24,000-26,000 lb. GVW
  • 2009-2009 Peterbilt 325 - Position: Front
  • 2002-2003 International 4200 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-1998 International 4700LP - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-2003 International 4900 - Position: Rear
  • 2005-2005 International 3000RE - Position: Front
  • 2005-2005 Ford F650 - Position: Rear
    • w/ Disc Brakes w/ 66mm Dual Piston Caliper
  • 2005-2005 International 3000RE - Position: Rear
  • 2002-2007 International 4400 - Position: Front
  • 2005-2005 Freightliner M2 100 - Position: Front
  • 2003-2008 Ford F650 - Position: Rear
  • 2005-2005 Freightliner M2 100 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2000-2002 International 3000IC - Position: Rear
  • 2007-2008 Freightliner M2 112 - Position: Rear
  • 2000-2000 International 3400 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-2004 International 3800 - Position: Front
  • 1998-2002 International 4900 - Position: Front
  • 1999-1999 International 3000FE - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2003-2003 Sterling Truck Acterra 5500 - Position: Rear
  • 1998-1998 International 3400 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2002-2002 International 4800 - Position: Rear
    • w/ Disc Brakes w/ 73mm Dual Piston Caliper
  • 2002-2006 International 4300 - Position: Front
  • 2002-2002 International 4400 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-2001 International 4800 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2004-2004 International 3200 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2002-2002 International 3000RE - Position: Front
  • 2000-2000 International 3800 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2002-2002 International 3200 - Position: Front
  • 1998-1999 International 3000FE - Position: Rear
  • 2005-2005 International 4700 - Position: Rear
  • 2008-2009 Peterbilt 330 - Position: Rear
    • Kit Services Axle Only
  • 2002-2007 International 4300 - Position: Rear
  • 2016-2016 Ford F53 - Position: Front
  • 2005-2007 Freightliner M2 106 - Position: Front
  • 2002-2002 International 4700LPX - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-1999 International 1652SC - Position: Rear
  • 2000-2004 International 1652SC - Position: Front
  • 2008-2009 Kenworth T370 - Position: Rear
  • 1999-1999 International 3400 - Position: Front
  • 1998-2002 International 3400 - Position: Rear
  • 2003-2008 Ford F750 - Position: Rear
  • 2004-2008 Freightliner Business Class M2 - Position: Rear
  • 2003-2003 Sterling Truck Acterra 5500 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2000-2001 International 4700LP - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2001-2001 Sterling Truck Acterra 6500 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2005-2007 International 3200 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2001-2003 International 3800 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2009-2009 Freightliner MT45 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1999-1999 International 4700LPX - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-2003 International 4700 - Position: Front
  • 1998-1998 International 3000FE - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2004-2004 Freightliner M2 100 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2003-2007 International 4200LP - Position: Front
  • 1998-1998 International 4700LPX - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2003-2006 International 4200LP - Position: Rear
  • 1998-1999 International 3600 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2002-2002 International 3000RE - Position: Front
    • w/ Disc Brakes w/ 73mm Dual Piston Caliper
  • 2004-2005 Sterling Truck Acterra 5500 - Position: Front
  • 2005-2006 Freightliner M2 112 - Position: Front
  • 2017-2017 Ford F53 - Position: Front
    • 24,000-26,000 lb. GVW
  • 2008-2008 Freightliner M2 106 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2007-2009 Freightliner MT55 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2005-2005 International 4700 - Position: Front
  • 2002-2006 International 4400LP - Position: Rear
  • 2009-2010 Peterbilt 335 - Position: Front
    • Kit Services Axle Only
  • 2005-2007 International 4200 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2005-2008 Freightliner M2 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1999-1999 International 4700LP - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2006-2006 International 4100 - Position: Rear
  • 2002-2004 International 4300LP - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2003-2004 Ford F650 - Position: Rear
    • w/ Disc Brakes w/ 73mm Dual Piston Caliper
  • 2014-2014 Ford F53 - Position: Rear
    • 24,000-26,000 lb. GVW
  • 1998-2003 Blue Bird TC2000 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2008-2009 Kenworth T170 - Position: Front
  • 2002-2004 International 4300 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2012-2013 Ford F53 - Position: Front
    • 24,000-26,000 lb. GVW
  • 2007-2008 Freightliner MT45 - Position: Front
  • 2002-2002 International 4700LP - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2005-2006 International 3300 - Position: Rear
  • 2012-2013 Ford F53 - Position: Rear
  • 2006-2006 International 4100 - Position: Front
    • w/ Disc Brakes w/ 66mm Dual Piston Caliper
  • 1998-1998 International 3800 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-2002 International 4700LP - Position: Front
  • 2006-2008 Freightliner M2 100 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2007-2007 International 4400LP - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2005-2006 International 4200LP - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2007-2008 Freightliner M2 112 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2004-2005 Sterling Truck Acterra 5500 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2002-2006 International 4300LP - Position: Rear
  • 2001-2001 Sterling Truck Acterra 7500 - Position: Front
  • 2003-2003 International 4200LP - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-2004 International 3800 - Position: Rear
  • 2001-2001 International 3600 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2002-2006 International 4200 - Position: Rear
  • 2018-2018 Ford F53 - Position: Rear
    • 24,000-26,000 lb. GVW
  • 1998-2002 International 4700 - Position: Rear
  • 2001-2002 Sterling Truck Acterra 5500 - Position: Front
  • 2001-2002 International 3400 - Position: Front
  • 1998-1999 International 1652SC - Position: Front
    • w/ Disc Brakes w/ 66mm Dual Piston Caliper
  • 2002-2007 International 4300LP - Position: Front
  • 2004-2004 Freightliner M2 100 - Position: Rear
  • 2006-2008 Freightliner M2 100 - Position: Rear
  • 1998-2002 International 4800 - Position: Rear
  • 2002-2002 International 4700 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2008-2009 Ford F53 - Position: Rear
    • 24,000-26,000 lb. GVW
  • 2002-2002 International 3200 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2006-2006 International 4100 - Position: Front
  • 1999-1999 International 3800 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2004-2004 Freightliner M2 106 - Position: Rear
  • 2002-2003 Sterling Truck Acterra 7500 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2003-2008 Ford F650 - Position: Front
  • 2009-2012 Kenworth T270 - Position: Rear
  • 2002-2007 International 4400LP - Position: Front
  • 2004-2004 Freightliner M2 112 - Position: Rear
  • 2003-2003 International 3200 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2005-2005 International 4700 - Position: Front
    • w/ Disc Brakes w/ 73mm Dual Piston Caliper
  • 2010-2010 Peterbilt 330 - Position: Front
    • Kit Services Axle Only
  • 2009-2009 Peterbilt 325 - Position: Rear
    • Kit Services Axle Only
  • 2015-2015 Ford F53 - Position: Rear
  • 1999-2001 International 4700 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2002-2006 International 4400 - Position: Rear
  • 1998-2002 International 3000 - Position: Rear
  • 2011-2011 Peterbilt 330 - Position: Front
  • 2008-2009 Peterbilt 330 - Position: Front
  • 1998-1999 International 3000 - Position: Front
    • w/ Disc Brakes w/ 66mm Dual Piston Caliper
  • 2002-2006 International 4400LP - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2008-2009 Kenworth T170 - Position: Rear
  • 2003-2003 International 4700 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2008-2008 Peterbilt 335 - Position: Front
  • 2002-2004 Sterling Truck Acterra 6500 - Position: Front
  • 2004-2004 Freightliner M2 106 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-2002 International 4700LP - Position: Rear
  • 2018-2018 Ford F53 - Position: Front
  • 2001-2002 Sterling Truck Acterra 5500 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2004-2004 International 3200 - Position: Front
  • 2002-2003 Sterling Truck Acterra 7500 - Position: Rear
  • 2015-2015 Ford F53 - Position: Front
    • 24,000-26,000 lb. GVW
  • 1998-1998 International 4700 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2005-2007 International 3200 - Position: Rear
  • 2008-2009 Kenworth T370 - Position: Front
  • 2007-2007 International 4200LP - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2000-2004 International 1652SC - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-1999 International 3000FE - Position: Front
  • 2004-2005 Sterling Truck Acterra 7500 - Position: Front
  • 2004-2004 International 4200 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2002-2002 International 3000RE - Position: Rear
  • 2001-2002 International 3000 - Position: Front
    • w/ Disc Brakes w/ 66mm Dual Piston Caliper
  • 2008-2008 Peterbilt 335 - Position: Rear
    • Kit Services Axle Only
  • 2001-2001 International 4700LPX - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2000-2000 International 3000 - Position: Front
    • w/ Disc Brakes w/ 73mm Dual Piston Caliper
  • 2005-2007 International 4300 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2005-2007 Freightliner M2 106 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2004-2004 International 4200LP - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-1999 International 3600 - Position: Rear
  • 2004-2005 Sterling Truck Acterra 7500 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2004-2004 International 3800 - Position: Front
    • w/ Disc Brakes w/ 73mm Dual Piston Caliper
  • 2000-2000 International 4700LPX - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 1998-2002 International 4800 - Position: Front
  • 2004-2008 Freightliner Business Class M2 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2006-2008 Ford F650 - Position: Rear
    • w/ Disc Brakes w/ 73mm Dual Piston Caliper
  • 2000-2002 International 3000IC - Position: Front
    • w/ Disc Brakes w/ 73mm Dual Piston Caliper
  • 2011-2011 Ford F53 - Position: Front
  • 2003-2007 International 4400 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2000-2003 International 4900 - Position: Front
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2001-2002 International 3400 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2001-2001 Sterling Truck Acterra 6500 - Position: Rear
  • 2005-2005 International 3000RE - Position: Front
    • w/ Disc Brakes w/ 73mm Dual Piston Caliper
  • 2005-2006 Freightliner M2 112 - Position: Rear
    • 66mm Or 73mm Dual Piston Pin Slide Caliper
  • 2010-2011 Peterbilt 330 - Position: Rear
  • 1998-2002 International 4700LPX - Position: Front
  • 2017-2017 Ford F53 - Position: Rear
  • 2009-2012 Kenworth T270 - Position: Front
  • 2000-2002 International 3000IC - Position: Front
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Brand Description:
Front Brake Caliper Hardware Kit
Product Description:
Front Disc Brake Caliper Hardware Kit with Clips
Material:
Steel
Programming Required:
No
Color:
Natural
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Includes necessary hardware for easy installation
Features & Benefits - Bullet 3:
Thoroughly manufactured to meet your expectations for fit, form, and function
Features & Benefits - Bullet 1:
Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
Weight (lb) (Pound):
0.29
Height (in) (Inch):
1.8
Width (in) (Inch):
3.3
Length (in) (Inch):
7.3
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Chirping, grinding, or squeaking noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
FAQ - Answer 2:
Yes, it is a good idea to inspect your brake fluid often.
Life Cycle Status:
Announced
FAQ - Question 3:
Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Question 1:
Are these brake parts durable?
Item Level GTIN:
00707773679142
FAQ - Question 2:
Do I need to check my brake fluid when replacing other brake parts?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake rotor signs of wear include:
FAQ - Answer 1:
Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
FAQ - Answer 3:
Yes, both part offerings are high quality replacement parts.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Brake Lubricant Included:
No
Country of Origin:
United States
Weight - Each (Gross Pounds):
00.29
Weight - Case (Gross Pounds):
07.25
Height - Each (Inch):
01.80
Height - Case (Inch):
10.40
Length - Each (Inch):
07.30
Length - Case (Inch):
13.80
Width - Each (Inch):
03.30
Width - Case (Inch):
11.10



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top