24/7 Customer Service
| Connector Color | Black |
| Connector Gender | Female |
| Connector Shape | Oval |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Height (in) | 0.9 |
| Length (in) | 12 |
| Length (mm) | 162.85 |
| Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
| Mounting Hardware Included | Yes |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Chirping or grinding noises when braking. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Difficulty stopping the vehicle. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | A low or sinking brake pedal. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Vehicle pulls to the left or right when brakes are applied. |
| Signs of Wear & Troubleshooting - Section 1 - Header | General brake signs of wear include: |
| Terminal Gender | Male |
| Terminal Quantity | 2 |
| Terminal Type | Pin |
| Weight (lb) | 0.35 |
| Width (in) | 14 |
ACDelco
ACDelco GM Original Equipment ABS Wheel Speed Sensors are located at each wheel, monitoring the rotation of each wheel, and are GM-recommended replacements for your vehicle's original components. The...
