×
close
click to zoom in

ACDelco 26661X | Upper Radiator Coolant Hose

(No reviews yet) Write a Review
$71.39
Part Number
ACD26661X
UPC:
00707773326404
Condition:
New
5 customers are viewing this product
ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today's smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet your expectations for fit, form, and function. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
  • Dodge
  • Has a heat and ozone resistant cover to increase the life of the hose
  • Inside diameters ranges from 1/4 in to 1 in to fit different types of vehicles
  • Installs without buckling, bending out of shape, or straining at the connection for easy installation
  • Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications

SPECIFICS:

Branch Quantity1
ColorBlack
Contains SpringNo
FAQ - Answer 1Yes, make sure the hose clamps are screwed on tightly when installing.
FAQ - Answer 2Yes - when there's water in the hose. That's why it's important to follow the vehicle manufacturer's recommendation on the use of engine coolant.
FAQ - Answer 3No, use the hose in the way it's listed in the ACDelco belts and hoses catalog.
FAQ - Answer 4Yes, this requires inspection, though. When the engine is cool, squeeze the hoses with your thumb and forefinger near the clamps. Feel for soft or mushy spots. A good hose will have a firm yet pliant feel. Also, Inspect for cracks, nicks, bulges (usually while hot), or a collapsed section in the hose and oil contamination, or fraying near the connection points.
FAQ - Answer 5No
FAQ - Answer 6No
FAQ - Question 1Can an automotive hose detach during use?
FAQ - Question 2Can an automotive hose freeze in the winter?
FAQ - Question 3Can I use the same automotive hose for multiple uses?
FAQ - Question 4Will I know when it is time to replace an automotive hose?
FAQ - Question 5Are there steps I can take to ensure a longer automotive hose life?
FAQ - Question 6Will a worn automotive hose affect gas mileage?
Good Maintenance Practices - Section 1 - Bullet 1Examine hoses every 12 months. Look for leaks, cracks, or rot. Replace when showing signs of wear.
Good Maintenance Practices - Section 1 - Bullet 2Tighten any loose clamps. Replace clamps when replacing hoses.
Good Maintenance Practices - Section 1 - Bullet 3Have cooling system inspected immediately if instrument panel-mounted temperature gauge indicates engine overheating.
Good Maintenance Practices - Section 1 - Bullet 4Periodically remove bugs, leaves, and other debris from the front of the radiator. They can block airflow and substantially reduce cooling efficiency.
Good Maintenance Practices - Section 1 - Bullet 5Though electrochemical degradation occurs from the inside out, you can feel for voids, cracks, or weak spots. Squeeze the hose with your thumb and two or three fingers. If you're not sure, remove the hose and check it visually.
Hose ShapeMolded Assembly
MaterialReinforced Rubber
MeasurementsBranched - 1 1/2 in x 32
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Programming RequiredNo
Protective Sleeve AttachedYes
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Signs of electrochemical degradation include voids, cracks, or weak spots on the inside of the hose.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Signs of internal heat damage include slight swelling of the hose cover.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Signs of external heat damage include hardening or cracking of the hose cover.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Other signs of wear include oil damage, abrasion damage, brittleness, lack of heat/cooling within the cabin, ozone damage, and leakage of the hose.

DOWNLOADS:

APPLICATIONS:

  • 2000-2003 Dodge Dakota - Position: Upper
    • W/Housing; Cut to fit
  • 2000-2003 Dodge Durango - Position: Upper
    • W/Housing; Cut to fit
  • 2000-2003 Dodge Dakota - Position: Upper
    • W/Housing
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Product Description:
Molded Upper Radiator Hose
Material:
Reinforced Rubber
Programming Required:
No
Color:
Black
Branch Quantity:
1
End 2 Inside Diameter (Inch):
1.50
Contains Spring:
No
End 1 Inside Diameter (Inch):
1.50
Protective Sleeve Attached:
Yes
Hose Shape:
Molded Assembly
Measurements:
Branched - 1 1/2 in x 32
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
Features & Benefits - Bullet 4:
Installs without buckling, bending out of shape, or straining at the connection for easy installation
Features & Benefits - Bullet 3:
Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
Features & Benefits - Bullet 1:
Has a heat and ozone resistant cover to increase the life of the hose
Signs of Wear & Troubleshooting - Section 1 - Bull:
Signs of electrochemical degradation include voids, cracks, or weak spots on the inside of the hose.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Other signs of wear include oil damage, abrasion damage, brittleness, lack of heat/cooling within the cabin, ozone damage, and leakage of the hose.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Signs of internal heat damage include slight swelling of the hose cover.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Signs of external heat damage include hardening or cracking of the hose cover.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Question 4:
Will I know when it is time to replace an automotive hose?
Item Level GTIN:
00707773326404
FAQ - Answer 2:
Yes - when there's water in the hose. That's why it's important to follow the vehicle manufacturer's recommendation on the use of engine coolant.
FAQ - Question 3:
Can I use the same automotive hose for multiple uses?
FAQ - Question 1:
Can an automotive hose detach during use?
FAQ - Answer 5:
No
FAQ - Question 2:
Can an automotive hose freeze in the winter?
Features & Benefits - Bullet 5:
Inside diameters ranges from 1/4 in to 1 in to fit different types of vehicles
FAQ - Question 6:
Will a worn automotive hose affect gas mileage?
FAQ - Question 5:
Are there steps I can take to ensure a longer automotive hose life?
FAQ - Answer 1:
Yes, make sure the hose clamps are screwed on tightly when installing.
Good Maintenance Practices - Section 1 - Bullet 1:
Examine hoses every 12 months. Look for leaks, cracks, or rot. Replace when showing signs of wear.
Good Maintenance Practices - Section 1 - Bullet 2:
Tighten any loose clamps. Replace clamps when replacing hoses.
Good Maintenance Practices - Section 1 - Bullet 3:
Have cooling system inspected immediately if instrument panel-mounted temperature gauge indicates engine overheating.
Good Maintenance Practices - Section 1 - Bullet 4:
Periodically remove bugs, leaves, and other debris from the front of the radiator. They can block airflow and substantially reduce cooling efficiency.
FAQ - Answer 3:
No, use the hose in the way it's listed in the ACDelco belts and hoses catalog.
Good Maintenance Practices - Section 1 - Bullet 5:
Though electrochemical degradation occurs from the inside out, you can feel for voids, cracks, or weak spots. Squeeze the hose with your thumb and two or three fingers. If you're not sure, remove the hose and check it visually.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
FAQ - Answer 6:
No
End 2 Inside Diameter (Millimeter):
38.0
End 1 Inside Diameter (Millimeter):
38.0
Centerline Length (Millimeter):
813
Country of Origin:
United States
Weight - Each (Gross Pounds):
01.70
Height - Each (Inch):
03.00
Length - Each (Inch):
25.60
Width - Each (Inch):
09.60



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top