ACDelco
ACDelco 334-1443 | Alternator
ACDelco Gold (Professional) Remanufactured Alternators are the high quality alternative to Original Equipment (OE) parts. These alternators use high-quality bearings with high-temp lubricant and...
Alternator Case Material | Aluminum |
Amperage Rating (A) | 63 A |
DE to Pulley 1st Groove (mm) | 24.0 mm |
DE to Rotor Shaft End (mm) | 29.0 |
External Fan Included | Yes |
Family | Delco 10 SI |
Fan Type | External |
FAQ - Answer 1 | Yes. These alternators are designed to withstand a wide range of weather conditions. |
FAQ - Answer 2 | No. Some vehicles require more amperage than others depending on the amount of electronics that need to be operated. Consult the vehicle information for proper application. |
FAQ - Question 1 | Can I be assured that the unit will last, especially in extreme weather? |
FAQ - Question 2 | Do all alternators supply the same amperage? |
Finish | Same as OE |
Good Maintenance Practices - Section 1 - Bullet 1 | There is a cooling fan in most alternators to keep it from overheating. Making sure that the fan is clean will help the fan and alternator run properly. |
Good Maintenance Practices - Section 1 - Bullet 2 | It is also important that all electrical connections are kept clean and firmly attached, which will make sure the battery is being properly charged by the alternator. |
Ground Type | Negative |
Height (in) | 7 |
Length (in) | 8.1 |
Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
Mounting Type | 1 Pivot Foot |
Plug Clock Rear View Main Mounting Ear at 6 O Clock | 9 |
Pulley Belt Type | V-belt |
Pulley Groove Quantity | 1 |
Pulley Included | Yes |
Regulator Type | Internal |
Rotation Direction | Clockwise |
Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Grinding or squeaking noise |
Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Alternator warning light illuminates |
Signs of Wear & Troubleshooting - Section 2 - Bullet 1 | Bad battery |
Signs of Wear & Troubleshooting - Section 2 - Bullet 2 | Broken, frayed, or loose drive belt |
Signs of Wear & Troubleshooting - Section 2 - Bullet 3 | Electrical fault |
Signs of Wear & Troubleshooting - Section 2 - Bullet 4 | Worn or damaged bearings |
Signs of Wear & Troubleshooting - Section 2 - Bullet 5 | Corroded or loose battery terminal connection |
Signs of Wear & Troubleshooting - Section 2 - Bullet 6 | Burned fuses or fusible links |
Signs of Wear & Troubleshooting - Section 2 - Header | Other vehicle parts that might cause related alternator problems include: |
Signs of Wear & Troubleshooting - Section 3 - Bullet 1 | Battery health |
Signs of Wear & Troubleshooting - Section 3 - Bullet 2 | Diagnostic trouble codes |
Signs of Wear & Troubleshooting - Section 3 - Bullet 3 | Evidence of fluid contamination |
Signs of Wear & Troubleshooting - Section 3 - Header | When making repairs on electrical systems, in-depth diagnosis is needed before parts replacement. This includes checking: |
Terminal Connection Quantity | 2 |
Voltage | 12 VDC |
Weight (lb) | 10.43 |
Width (in) | 7.6 |