×
close
click to zoom in

ACDelco 337-1093 | Starter Motor

(No reviews yet) Write a Review
$127.99
Part Number
ACD337-1093
UPC:
707773939659
Condition:
New
5 customers are viewing this product

Starter

BRAND: ACDelco

SPECIFICS:

ACD_RemanDesNo
AltPA_262_HP4.02
AltPA_262_KW3.00
AltPA_265_mm243
AltPA_266_mm47.7
Case GroundingGrounded Case
FamilyWound Field Offset Gear Reduction
FAQ - A3Is the solenoid included?
FAQ - A4Can I be assured that the unit will last, especially in extreme weather?
FAQ - A5Do I always need a starter shim?
FAQ - Q4Yes. It is included where the design of the starter requires a solenoid.
FAQ - Q5Yes. These starters are designed to withstand a wide range of weather conditions.
FAQ - Q6No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive makes appropriate contact with the flywheel.
Features & Benefits - B1NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality
Features & Benefits - B2All components are 100% NEW to provide improved performance
Features & Benefits - B3Engineering enhancements to internal components provide the latest, most efficient unit for your vehicle
Features & Benefits - B4Key components are greased to ensure long term reliability in harsh conditions
Features & Benefits - B5All dimensions, key mounting surfaces, and contact points are gauged and measured to ensure proper fit
Features & Benefits - B6Computer tested for solenoid contact life, coil balance, and pull strength, and the drive gears/clutches are assembled under tight specifications for even greater peace of mind
Features & Benefits - B7Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features & Benefits - B8Premium aftermarket replacement part
Features & Benefits - B9Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Features & Benefits Chart 1PL31_PL33_CC_NewRemanChart.jpg
Good Maintenance Practices - S1 B6Check electrical connections, making sure they are kept clean.
Good Maintenance Practices - S1 B7Make sure all connections to the battery are firmly attached and in good condition.
Good Maintenance Practices - S1 B8Keeping all connections clean and tight will make sure your starter will crank with full power.
Good Maintenance Practices - S1 B9It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
Height5.8
Length12.7
Mkt_State_Warranty_CA24 Months/40,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US24 Months / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Mounting Bolt Hole Quantity3
Mounting Hardware IncludedNo
Mounting Shims IncludedNo
Nose Cone MaterialAluminum
Nose Cone TypeClosed Nose
Power Rating3.00
Product DescriptionACDelco Gold (Professional) NEW Starters are the high quality alternative to Original Equipment (OE) parts. Key components are lubricated to help ensure improved performance and long life reliability even in the toughest conditions. Starters have solenoids that are computer tested for contact life, coil balance, and pull strength, drive gears/clutches assembled under tight specifications for even greater peace of mind. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Re-Clockable FlangeNo
Signs of Wear & Troubleshooting - S1 B5Indicators that there could be a problem with your vehicle's starter are:
Signs of Wear & Troubleshooting - S1 B6Engine will not crank
Signs of Wear & Troubleshooting - S1 B7Engine cranks slowly
Signs of Wear & Troubleshooting - S1 B8Clunking/grinding noise when starting engine
Signs of Wear & Troubleshooting - S1 B9Starter will not engage
Signs of Wear & Troubleshooting - S2 B5Other vehicle parts that might cause related starter problems include:
Signs of Wear & Troubleshooting - S2 B6Electrical fault
Signs of Wear & Troubleshooting - S2 B7Loose mounting bolts
Signs of Wear & Troubleshooting - S2 B8Sticking starter drive
Signs of Wear & Troubleshooting - S2 B9Damage to flywheel
Solenoid AttachedYES
Starter RotationClockwise
Tooth Quantity13
Vintage_Part_IndicatorN
Voltage12
Weight17.4
Width7.2

DOWNLOADS:

APPLICATIONS:

  • 1989-1993 Dodge D350
  • 1989-1993 Dodge D250
  • 1989-1993 Dodge W250
  • 1989-1993 Dodge W350

Product type:
Aftermarket
Product Description:
Starter
Mounting Hardware Included:
No
Tooth Quantity:
13
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
All components are 100% NEW to provide improved performance
Features & Benefits - Bullet 4:
Key components are greased to ensure long term reliability in harsh conditions
Features & Benefits - Bullet 3:
Engineering enhancements to internal components provide the latest, most efficient unit for your vehicle
Features & Benefits - Bullet 1:
NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality
Weight (lb) (Pound):
17.4
Height (in) (Inch):
5.8
Width (in) (Inch):
7.2
Length (in) (Inch):
12.7
Signs of Wear & Troubleshooting - Section 1 - Bull:
Starter will not engage
Signs of Wear & Troubleshooting - Section 1 - Bull:
Indicators that there could be a problem with your vehicle's starter are:
Signs of Wear & Troubleshooting - Section 1 - Bull:
Engine will not crank
Signs of Wear & Troubleshooting - Section 1 - Bull:
Engine cranks slowly
Signs of Wear & Troubleshooting - Section 1 - Bull:
Clunking/grinding noise when starting engine
FAQ - Question 4:
Yes. It is included where the design of the starter requires a solenoid.
Features & Benefits - Bullet 7:
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Life Cycle Status:
Announced
FAQ - Answer 5:
Do I always need a starter shim?
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Features & Benefits - Bullet 6:
Computer tested for solenoid contact life, coil balance, and pull strength, and the drive gears/clutches are assembled under tight specifications for even greater peace of mind
Item Level GTIN:
00707773939659
Features & Benefits - Bullet 5:
All dimensions, key mounting surfaces, and contact points are gauged and measured to ensure proper fit
FAQ - Question 6:
No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive makes appropriate contact with the flywheel.
FAQ - Question 5:
Yes. These starters are designed to withstand a wide range of weather conditions.
FAQ - Answer 4:
Can I be assured that the unit will last, especially in extreme weather?
FAQ - Answer 3:
Is the solenoid included?
Good Maintenance Practices - Section 1 - Bullet 6:
Check electrical connections, making sure they are kept clean.
Features & Benefits - Bullet 8:
Premium aftermarket replacement part
Good Maintenance Practices - Section 1 - Bullet 7:
Make sure all connections to the battery are firmly attached and in good condition.
Features & Benefits - Bullet 9:
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Signs of Wear & Troubleshooting - Section 2 - Bull:
Sticking starter drive
Signs of Wear & Troubleshooting - Section 2 - Bull:
Other vehicle parts that might cause related starter problems include:
Signs of Wear & Troubleshooting - Section 2 - Bull:
Electrical fault
Signs of Wear & Troubleshooting - Section 2 - Bull:
Damage to flywheel
Signs of Wear & Troubleshooting - Section 2 - Bull:
Loose mounting bolts
Good Maintenance Practices - Section 1 - Bullet 8:
Keeping all connections clean and tight will make sure your starter will crank with full power.
Voltage:
12 VDC
Good Maintenance Practices - Section 1 - Bullet 9:
It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
Mounting Bolt Hole Quantity:
3
Solenoid Attached:
Yes
Family:
Wound Field Offset Gear Reduction
Power Rating (Kilowatts):
3.00
Power Rating (Horsepower):
3
Mounting Flange to Pinion End at Rest (Millimeter):
47.7
Starter Rotation:
Clockwise
Nose Cone Material:
Aluminum
Case Grounding:
Grounded Case
Nose Cone Type:
Closed Nose
Mounting Shims Included:
No
Re Clockable Flange:
No
Mounting Flange to End of Case (Millimeter):
243
Country of Origin:
China
Weight - Each (Gross Pounds):
17.40
Height - Each (Inch):
05.80
Length - Each (Inch):
12.70
Width - Each (Inch):
07.20



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top