| ACD_RemanDes | No |
| AltPA_262_HP | 3.35 |
| AltPA_262_KW | 2.50 |
| AltPA_265_mm | 270.4 |
| AltPA_266_mm | 20.0 |
| Case Grounding | Grounded Case |
| Family | Wound Field Offset Gear Reduction |
| FAQ - A3 | Is the solenoid included? |
| FAQ - A4 | Can I be assured that the unit will last, especially in extreme weather? |
| FAQ - A5 | Do I always need a starter shim? |
| FAQ - Q4 | Yes. It is included where the design of the starter requires a solenoid. |
| FAQ - Q5 | Yes. These starters are designed to withstand a wide range of weather conditions. |
| FAQ - Q6 | No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive makes appropriate contact with the flywheel. |
| Features & Benefits - B1 | NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality |
| Features & Benefits - B2 | All components are 100% NEW to provide improved performance |
| Features & Benefits - B3 | Engineering enhancements to internal components provide the latest, most efficient unit for your vehicle |
| Features & Benefits - B4 | Key components are greased to ensure long term reliability in harsh conditions |
| Features & Benefits - B5 | All dimensions, key mounting surfaces, and contact points are gauged and measured to ensure proper fit |
| Features & Benefits - B6 | Computer tested for solenoid contact life, coil balance, and pull strength, and the drive gears/clutches are assembled under tight specifications for even greater peace of mind |
| Features & Benefits - B7 | Some ACDelco Gold parts may have formerly appeared as ACDelco Professional |
| Features & Benefits - B8 | Premium aftermarket replacement part |
| Features & Benefits - B9 | Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models |
| Features & Benefits Chart 1 | PL31_PL33_CC_NewRemanChart.jpg |
| Good Maintenance Practices - S1 B6 | Check electrical connections, making sure they are kept clean. |
| Good Maintenance Practices - S1 B7 | Make sure all connections to the battery are firmly attached and in good condition. |
| Good Maintenance Practices - S1 B8 | Keeping all connections clean and tight will make sure your starter will crank with full power. |
| Good Maintenance Practices - S1 B9 | It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it. |
| Height | 5.8 |
| Length | 12.7 |
| Mkt_State_Warranty_CA | 24 Months/40,000 KM (Parts Only). Please see ACDelcocanada.com for more details. |
| Mkt_State_Warranty_US | 24 Months / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details. |
| Mounting Bolt Hole Quantity | 2 |
| Mounting Hardware Included | No |
| Mounting Shims Included | No |
| Nose Cone Material | Aluminum |
| Nose Cone Type | Open Nose |
| Power Rating | 3.00 |
| Product Description | ACDelco Gold (Professional) NEW Starters are the high quality alternative to Original Equipment (OE) parts. Key components are lubricated to help ensure improved performance and long life reliability even in the toughest conditions. Starters have solenoids that are computer tested for contact life, coil balance, and pull strength, drive gears/clutches assembled under tight specifications for even greater peace of mind. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. |
| Programming Required | NO |
| Re-Clockable Flange | No |
| Signs of Wear & Troubleshooting - S1 B5 | Indicators that there could be a problem with your vehicle's starter are: |
| Signs of Wear & Troubleshooting - S1 B6 | Engine will not crank |
| Signs of Wear & Troubleshooting - S1 B7 | Engine cranks slowly |
| Signs of Wear & Troubleshooting - S1 B8 | Clunking/grinding noise when starting engine |
| Signs of Wear & Troubleshooting - S1 B9 | Starter will not engage |
| Signs of Wear & Troubleshooting - S2 B5 | Other vehicle parts that might cause related starter problems include: |
| Signs of Wear & Troubleshooting - S2 B6 | Electrical fault |
| Signs of Wear & Troubleshooting - S2 B7 | Loose mounting bolts |
| Signs of Wear & Troubleshooting - S2 B8 | Sticking starter drive |
| Signs of Wear & Troubleshooting - S2 B9 | Damage to flywheel |
| Solenoid Attached | YES |
| Starter Rotation | Clockwise |
| Tooth Quantity | 10 |
| Vintage_Part_Indicator | N |
| Voltage | 12 |
| Weight | 18.65 |
| Width | 7.2 |
ACDelco
ACDelco Gold (Professional) NEW Starters are the high quality alternative to Original Equipment (OE) parts. Key components are lubricated to help ensure improved performance and long life reliability...
ACDelco
ACDelco Gold (Professional) NEW Starters are the high quality alternative to Original Equipment (OE) parts. Key components are lubricated to help ensure improved performance and long life reliability...
ACDelco
ACDelco Gold (Professional) NEW Starters are the high quality alternative to Original Equipment (OE) parts. Key components are lubricated to help ensure improved performance and long life reliability...
ACDelco
ACDelco Gold (Professional) NEW Starters are the high quality alternative to Original Equipment (OE) parts. Key components are lubricated to help ensure improved performance and long life reliability...
ACDelco
ACDelco Gold (Professional) NEW Starters are the high quality alternative to Original Equipment (OE) parts. Key components are lubricated to help ensure improved performance and long life reliability...
