×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 337-1175 | Starter Motor
click to zoom in

ACDelco 337-1175 | Starter Motor

(No reviews yet) Write a Review
$191.99
Part Number
ACD337-1175
UPC:
808709412120
Condition:
New
5 customers are viewing this product

video gallery

Description

Starter

BRAND: ACDelco

FEATURES:

  • Starter

SPECIFICS:

ACD_RemanDesNo
AltPA_262_KW1.40
AltPA_265_mm135.8
AltPA_266_mm29.5
FamilyPermanent Magnet Planetary Gear Reduction
FAQ - A3Is the solenoid included?
FAQ - A4Can I be assured that the unit will last, especially in extreme weather?
FAQ - A5Do I always need a starter shim?
FAQ - Q4Yes. It is included where the design of the starter requires a solenoid.
FAQ - Q5Yes. These starters are designed to withstand a wide range of weather conditions.
FAQ - Q6No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive makes appropriate contact with the flywheel.
Features & Benefits - B1NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality
Features & Benefits - B2All components are 100% NEW to provide improved performance
Features & Benefits - B3Engineering enhancements to internal components provide the latest, most efficient unit for your vehicle
Features & Benefits - B4Key components are greased to ensure long term reliability in harsh conditions
Features & Benefits - B5All dimensions, key mounting surfaces, and contact points are gauged and measured to ensure proper fit
Features & Benefits - B6Computer tested for solenoid contact life, coil balance, and pull strength, and the drive gears/clutches are assembled under tight specifications for even greater peace of mind
Features & Benefits - B7Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features & Benefits - B8Premium aftermarket replacement part
Features & Benefits - B9Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Features & Benefits Chart 1PL31_PL33_CC_NewRemanChart.jpg
Good Maintenance Practices - S1 B6Check electrical connections, making sure they are kept clean.
Good Maintenance Practices - S1 B7Make sure all connections to the battery are firmly attached and in good condition.
Good Maintenance Practices - S1 B8Keeping all connections clean and tight will make sure your starter will crank with full power.
Good Maintenance Practices - S1 B9It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
Height5.8
Length12.7
Mkt_State_Warranty_CA24 Months/40,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US24 Months / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Mounting Bolt Hole Quantity3
Mounting Flange to End of Case5.35
Mounting Flange to Pinion End at Rest1.16
Mounting Hardware IncludedNo
Mounting Shims IncludedNo
Mounting TypeFlange
Nose Cone TypeClosed Nose
Power Rating1.40
Product DescriptionACDelco Gold (Professional) NEW Starters are the high quality alternative to Original Equipment (OE) parts. Key components are lubricated to help ensure improved performance and long life reliability even in the toughest conditions. Starters have solenoids that are computer tested for contact life, coil balance, and pull strength, drive gears/clutches assembled under tight specifications for even greater peace of mind. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.
Programming RequiredNO
Re-Clockable FlangeYes
Signs of Wear & Troubleshooting - S1 B5Indicators that there could be a problem with your vehicle's starter are:
Signs of Wear & Troubleshooting - S1 B6Engine will not crank
Signs of Wear & Troubleshooting - S1 B7Engine cranks slowly
Signs of Wear & Troubleshooting - S1 B8Clunking/grinding noise when starting engine
Signs of Wear & Troubleshooting - S1 B9Starter will not engage
Signs of Wear & Troubleshooting - S2 B5Other vehicle parts that might cause related starter problems include:
Signs of Wear & Troubleshooting - S2 B6Electrical fault
Signs of Wear & Troubleshooting - S2 B7Loose mounting bolts
Signs of Wear & Troubleshooting - S2 B8Sticking starter drive
Signs of Wear & Troubleshooting - S2 B9Damage to flywheel
Solenoid AttachedYES
Starter RotationClockwise
Tooth Quantity12
Vintage_Part_IndicatorN
Voltage12
Weight6.48
Width7.2

Mitsubishi Unit

DOWNLOADS:

APPLICATIONS:

  • 2012-2016 GMC Acadia
  • 2017-2017 GMC Acadia Limited
  • 2012-2017 Chevrolet Traverse
  • 2014-2016 Chevrolet Impala Limited
  • 2015-2016 Chevrolet Colorado
  • 2012-2017 Chevrolet Equinox
  • 2013-2019 Cadillac XTS
  • 2012-2012 Chevrolet Captiva Sport
  • 2012-2017 GMC Terrain
  • 2012-2016 Cadillac SRX
  • 2015-2016 GMC Canyon
  • 2012-2019 Chevrolet Impala
  • 2012-2017 Buick Enclave
  • 2012-2012 Chevrolet Malibu
  • 2012-2016 Buick LaCrosse

Attributes
Product type:
Aftermarket
Brand Description:
Starter
Mounting Hardware Included:
No
Programming Required:
No
Mounting Type:
Flange
Tooth Quantity:
12
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
All components are 100% NEW to provide improved performance
Features & Benefits - Bullet 4:
Key components are greased to ensure long term reliability in harsh conditions
Features & Benefits - Bullet 3:
Engineering enhancements to internal components provide the latest, most efficient unit for your vehicle
Features & Benefits - Bullet 1:
NEW units are manufactured under the guidelines of ISO Quality Standards to ensure consistent quality
Weight (lb) (Pound):
6.48
Height (in) (Inch):
5.8
Width (in) (Inch):
7.2
Length (in) (Inch):
12.7
Signs of Wear & Troubleshooting - Section 1 - Bull:
Starter will not engage
Signs of Wear & Troubleshooting - Section 1 - Bull:
Engine will not crank
Signs of Wear & Troubleshooting - Section 1 - Bull:
Engine cranks slowly
Signs of Wear & Troubleshooting - Section 1 - Bull:
Clunking/grinding noise when starting engine
FAQ - Answer 2:
Yes. These starters are designed to withstand a wide range of weather conditions.
Life Cycle Status:
Announced
FAQ - Question 3:
Do I always need a starter shim?
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Question 1:
Is the solenoid included?
Item Level GTIN:
00808709412120
Features & Benefits - Bullet 7:
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features & Benefits - Bullet 6:
Computer tested for solenoid contact life, coil balance, and pull strength, and the drive gears/clutches are assembled under tight specifications for even greater peace of mind
FAQ - Question 2:
Can I be assured that the unit will last, especially in extreme weather?
Signs of Wear & Troubleshooting - Section 1 - Head:
Indicators that there could be a problem with your vehicle's starter are:
Features & Benefits - Bullet 5:
All dimensions, key mounting surfaces, and contact points are gauged and measured to ensure proper fit
FAQ - Answer 1:
Yes. It is included where the design of the starter requires a solenoid.
Good Maintenance Practices - Section 1 - Bullet 1:
Check electrical connections, making sure they are kept clean.
Good Maintenance Practices - Section 1 - Bullet 2:
Make sure all connections to the battery are firmly attached and in good condition.
Good Maintenance Practices - Section 1 - Bullet 3:
Keeping all connections clean and tight will make sure your starter will crank with full power.
Good Maintenance Practices - Section 1 - Bullet 4:
It is very important to try and keep the starter area clean from leaking car fluids or any other debris that may be near it.
FAQ - Answer 3:
No. However a shim may be required at the starter's mounting surface to align the starter, so the starter drive makes appropriate contact with the flywheel.
Features & Benefits - Bullet 8:
Premium aftermarket replacement part
Features & Benefits - Bullet 9:
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Signs of Wear & Troubleshooting - Section 2 - Bull:
Sticking starter drive
Signs of Wear & Troubleshooting - Section 2 - Bull:
Loose mounting bolts
Signs of Wear & Troubleshooting - Section 2 - Bull:
Electrical fault
Signs of Wear & Troubleshooting - Section 2 - Bull:
Damage to flywheel
Signs of Wear & Troubleshooting - Section 2 - Head:
Other vehicle parts that might cause related starter problems include:
Voltage:
12 VDC
Mounting Bolt Hole Quantity:
3
Solenoid Attached:
Yes
Family:
Permanent Magnet Planetary Gear Reduction
Power Rating (Kilowatts):
1.40
Power Rating (Horsepower):
1.4
Mounting Flange to Pinion End at Rest (Millimeter):
29.5
Starter Rotation:
Clockwise
Nose Cone Type:
Closed Nose
Mounting Shims Included:
No
Re Clockable Flange:
Yes
Mounting Flange to Pinion End at Rest (Inch):
1.16
Mounting Flange to End of Case (Inch):
5.35
Mounting Flange to End of Case (Millimeter):
135.8
Country of Origin:
Japan
Weight - Each (Gross Pounds):
06.48
Height - Each (Inch):
05.80
Length - Each (Inch):
12.70
Width - Each (Inch):
07.20



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top