×
close

ACDelco 45C0080 | Steering Pitman Arm

(No reviews yet) Write a Review
$78.36
Part Number
ACD45C0080
UPC:
00707773179901
Condition:
New
5 customers are viewing this product
Pitman Arm

BRAND: ACDelco

FEATURES:

  • alignment camber kit;alignment caster kit;ball joint bearing;ball joint bolt;ball joint;bushing;center link;center link steering;control arm;control arm bushing;drag link;idler arm;idler arm bracket;idler arm puller;pitman arm;pitman arm puller;suspension control arms;sway bar;tie rod;tie rod ball joint;tie rod end

SPECIFICS:

ACD_RemanDesNo
Castle Nut IncludedNO
ColorNatural
FAQ - A1Yes. For proper removal to prevent damage to the steering box, use of a pit arm puller is recommended.
FAQ - A2Yes. A pitman arm mounts to the steering box, while the idler arm is on the other side of the steering box mounted to the frame and attaches to the steering linkages.
FAQ - Q1Is a special tool required to remove the pitman arm?
FAQ - Q2Is there a difference between a pitman arm and a idler arm?
Features & Benefits - B1Forged arm for strength and durability
Features & Benefits - B2Design helps reduce side-to-side play
Features & Benefits - B3Undergoes extreme impact, wear, and fatigue testing to help with quality and durability
Features & Benefits - B4Induction hardened to match OE fatigue life
Features & Benefits - B5Greaseable where applicable: Allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
Features & Benefits - B6Corrosion-resistant coating
Features & Benefits - B7Manufactured at TS 16949-certified facilities to help with consistent high-quality
FinishPlain
Good Maintenance Practices - S1 B1Inspect or have your idler and pitman arms inspected for signs of wear. Exposure to dirt, road salt, and other harsh road conditions can cause wear and tear on your steering arms, or cause connections to loosen. One way to test your steering arm assemblies is to try to turn the steering wheel while your vehicle is parked. If you can turn the steering wheel a significant amount without resistance, then you may have a worn idler or pitman arm.
Good Maintenance Practices - S1 B2Replace your vehicle's idler and pitman arms at the same time. Since the idler arms and pitman arms are exposed to similar wear conditions, you should replace the steering arms at the same time. After your new arms are installed, have a professional alignment done.
Grease Fitting IncludedNO
Height2.7
Length9.2
Mkt_State_Warranty_CALimited Lifetime Warranty as long as the original purchaser still owns the vehicle (Parts Only). Please see ACDelcocanada.com for more details
Mkt_State_Warranty_USLimited Lifetime Warranty as long as the original purchaser still owns the vehicle (Parts Only). Please see ACDelco.com for more details
Product DescriptionAn ACDelco Professional Steering Pitman Arm is manufactured to provide a stable pivot point with the least amount of friction, and is a high quality replacement for many vehicles on the road today. This pitman arm connects your vehicle's steering gear to the steering linkage. This premium aftermarket replacement component is manufactured to meet your expectations for fit, form, and function. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Programming RequiredNO
Signs of Wear & Troubleshooting - S1 B4Excessive steering play: excessive movement or play in your vehicle's steering linkage may be a sign of steering arm wear
Signs of Wear & Troubleshooting - S1 B5Alignment issues: an inability to set the proper alignment for your vehicle may indicate worn steering arms
Spline Quantity32
Vehicle Ride HeightSTANDARD
Vintage_Part_IndicatorN
Weight2.75
Width3.5

DOWNLOADS:

APPLICATIONS:

  • 1996-2002 GMC Savana 1500 - Position: N/A
  • 1996-2002 Chevrolet Express 1500 - Position: N/A
  • 1996-2002 GMC Savana 3500 - Position: N/A
  • 1996-2002 Chevrolet Express 3500 - Position: N/A
  • 1996-2002 GMC Savana 2500 - Position: N/A
  • 1996-2002 Chevrolet Express 2500 - Position: N/A
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Product Description:
Pitman Arm
Programming Required:
No
Color:
Natural
Length (Inch):
9.2
Finish:
Plain
Spline Quantity:
32
Grease Fitting Included:
No
Castle Nut Included:
No
Vehicle Ride Height:
Standard
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Design helps reduce side-to-side play
Features & Benefits - Bullet 4:
Induction hardened to match OE fatigue life
Features & Benefits - Bullet 3:
Undergoes extreme impact, wear, and fatigue testing to help with quality and durability
Features & Benefits - Bullet 1:
Forged arm for strength and durability
Weight (lb) (Pound):
2.75
Height (in) (Inch):
2.7
Width (in) (Inch):
3.5
Signs of Wear & Troubleshooting - Section 1 - Bull:
Excessive steering play: excessive movement or play in your vehicle's steering linkage may be a sign of steering arm wear
Signs of Wear & Troubleshooting - Section 1 - Bull:
Alignment issues: an inability to set the proper alignment for your vehicle may indicate worn steering arms
Life Cycle Status:
Discontinued
FAQ - Answer 2:
Yes. A pitman arm mounts to the steering box, while the idler arm is on the other side of the steering box mounted to the frame and attaches to the steering linkages.
Life Cycle Status Description:
Discontinued - Part is being removed from the product line.
FAQ - Question 1:
Is a special tool required to remove the pitman arm?
Item Level GTIN:
00707773179901
Features & Benefits - Bullet 7:
Manufactured at TS 16949-certified facilities to help with consistent high-quality
Features & Benefits - Bullet 6:
Corrosion-resistant coating
FAQ - Question 2:
Is there a difference between a pitman arm and a idler arm?
Features & Benefits - Bullet 5:
Greaseable where applicable: Allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
FAQ - Answer 1:
Yes. For proper removal to prevent damage to the steering box, use of a pit arm puller is recommended.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Country of Origin:
Taiwan
Weight - Each (Gross Pounds):
02.75
Weight - Case (Gross Pounds):
33.00
Height - Each (Inch):
02.70
Height - Case (Inch):
10.50
Length - Each (Inch):
09.20
Length - Case (Inch):
10.70
Width - Each (Inch):
03.50
Width - Case (Inch):
09.70



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top