×
close

ACDelco 45G0411 | Front Suspension Stabilizer Bar Link

(No reviews yet) Write a Review
$34.84
Part Number
ACD45G0411
UPC:
00707773180334
Condition:
New
5 customers are viewing this product
ACDelco Professional Suspension Stabilizer Bar Links connect your vehicle's stabilizer bar to the control arm or strut, and are a high quality replacement for many vehicles on the road today. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Chrysler;Daewoo;Dodge;Jeep;Mazda;Mitsubishi
  • Corrosion-resistant coating
  • Full-ball stud provides smooth articulation and excellent durability
  • Over-sized metal rod provides strength
  • Wrench-flats or hex design for easy service

SPECIFICS:

FAQ - Answer 1Yes. An anti-roll bar (roll bar, anti-sway bar, sway bar, stabilizer bar) is a part of many automobile suspensions that helps reduce the body roll of a vehicle during fast cornering or over road irregularities. It connects opposite (left/right) wheels together through short lever arms linked by a torsion spring.
FAQ - Answer 2Yes. Depending on the vehicle you're driving, you may have a front or a rear sway bar, or you may have both. If you suspect that a sway bar is broken, you can still drive the car, but you must use caution and have it repaired as soon as possible. The way this will affect your drive will depend on whether the front or rear sway bar is broken.
FAQ - Question 1Do sway bars and stabilizer bars perform the same function?
FAQ - Question 2Can you drive a car with a broken sway bar?
Good Maintenance Practices - Section 1 - Bullet 1Inspect or have your stabilizer bar links inspected: a worn stabilizer bar link can impede the proper function of your vehicle's suspension system. Looseness in link ends may be present without the noises that often signal link wear, and part replacement is recommended should you find this loosening. Should the stabilizer bar links be replaced, stabilizer bar bushings should also be inspected and replaced as needed. Inspect your stabilizer bar links regularly, following exposure to events that may harm th component, or when you experience signs of stabilizer bar link wear.
Good Maintenance Practices - Section 1 - Bullet 2Vehicle alignment will not always be necessary following stabilizer bar link replacement. Unless you must remove other suspension components, replacing the stabilizer bar, its bushings, or its end links should not require a wheel alignment following installation.
Grade TypePerformance
GreasableNo
Height (in)3
Length (in)14.2
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Programming RequiredNo
Width (in)4

DOWNLOADS:

APPLICATIONS:

  • 2007-2019 Mitsubishi Outlander - Position: Front
  • 2019-2019 Mitsubishi Outlander PHEV - Position: Front
  • 1999-1999 Daewoo Nubira - Position: Front
  • 2007-2010 Chrysler Sebring - Position: Front
  • 2008-2017 Mitsubishi Lancer - Position: Front
  • 2011-2019 Mitsubishi Outlander Sport - Position: Front
  • 2007-2017 Jeep Compass - Position: Front
  • 2018-2019 Mitsubishi Eclipse Cross - Position: Front
  • 1999-2002 Daewoo Leganza - Position: Rear
  • 2002-2003 Mazda Protege5 - Position: Front
  • 2001-2003 Mazda Protege - Position: Front
  • 2007-2012 Dodge Caliber - Position: Front
  • 2000-2000 Mazda MPV - Position: Front
  • 2007-2017 Jeep Patriot - Position: Front
  • 2008-2014 Dodge Avenger - Position: Front
  • 2011-2019 Mitsubishi RVR - Position: Front
  • 2011-2014 Chrysler 200 - Position: Front
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Brand Description:
Suspension Stabilizer Bar Link Kit
Product Description:
Suspension Stabilizer Bar Link Kit with Hardware
Grade Type:
Performance
Height (Inch):
3
Programming Required:
No
Length (Inch):
14.2
Weight (Pound):
1.3
Width (Inch):
4
Greasable:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Full-ball stud provides smooth articulation and excellent durability
Features & Benefits - Bullet 4:
Corrosion-resistant coating
Features & Benefits - Bullet 3:
Wrench-flats or hex design for easy service
Features & Benefits - Bullet 1:
Over-sized metal rod provides strength
FAQ - Question 1:
Do sway bars and stabilizer bars perform the same function?
FAQ - Question 2:
Can you drive a car with a broken sway bar?
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Country of Origin:
United States
Life Cycle Status:
Superseded
Weight - Each (Gross Pounds):
01.30
Life Cycle Status Description:
Superseded - Part is being replaced by the surviving part number.
Weight - Case (Gross Pounds):
15.60
Item Level GTIN:
00707773180334
Height - Each (Inch):
03.00
Height - Case (Inch):
11.60
Length - Each (Inch):
14.20
Length - Case (Inch):
15.10
Width - Each (Inch):
04.00
Width - Case (Inch):
11.80



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top