×
close
click to zoom in

ACDelco 45G0826 | Suspension Stabilizer Bar Bushing Kit

(No reviews yet) Write a Review
$18.00
Part Number
ACD45G0826
UPC:
00021625552798
Condition:
New
5 customers are viewing this product
Front Suspension Stabilizer Bushing

BRAND: ACDelco

FEATURES:

  • alignment camber kit;alignment caster kit;ball joint bearing;ball joint bolt;ball joint;bushing;center link;center link steering;control arm;control arm bushing;drag link;idler arm;idler arm bracket;idler arm puller;pitman arm;pitman arm puller;suspension control arms;sway bar;tie rod;tie rod ball joint;tie rod end

SPECIFICS:

ACD_RemanDesNo
AltPA_18_mm33.02
ColorBlack
FAQ - A1Yes. An anti-roll bar (roll bar, anti-sway bar, sway bar, stabilizer bar) is a part of many automobile suspensions that helps reduce the body roll of a vehicle during fast cornering or over road irregularities. It connects opposite (left/right) wheels together through short lever arms linked by a torsion spring.
FAQ - A2Yes. Depending on the vehicle you're driving, you may have a front or a rear sway bar, or you may have both. If you suspect that a sway bar is broken, you can still drive the car, but you must use caution and have it repaired as soon as possible. The way this will affect your drive will depend on whether the front or rear sway bar is broken.
FAQ - Q1Do sway bars and stabilizer bars perform the same function?
FAQ - Q2Can you drive a car with a broken sway bar?
Features & Benefits - B1Bushing design features excellent abrasion, wear resistance, extreme temperature tolerance, and resistance to oils and fluids
Features & Benefits - B2Over-sized metal rod provides strength
Features & Benefits - B3Full-ball stud provides smooth articulation and excellent durability
Features & Benefits - B4Wrench-flats or hex design for easy service
Features & Benefits - B5Corrosion-resistant coating
Features & Benefits - B6Resistance to extreme temperatures, oils and abrasion
Features & Benefits - B7Manufactured at TS 16949-certified facilities to help with consistent high-quality
Features & Benefits - B8Premium, high-quality aftermarket component
Good Maintenance Practices - S1 B1Inspect or have your stabilizer bar bushings inspected regularly, following exposure to events that may harm the components, or when you experience signs of bushing wear.
Good Maintenance Practices - S1 B2If you choose to replace your vehicle's stabilizer bar bushings, you should also inspect your vehicle's sway bar end links and replace them as necessary.
Good Maintenance Practices - S1 B3Unless you must remove other suspension components, replacing the stabilizer bar, its bushings, or its end links should not require a wheel alignment following installation.
Grade TypePERFORMANCE
Grease Fitting IncludedNO
Inside Diameter1.30
Marketing Statement - Product LineACDelco offers a full line of Professional, premium aftermarket Chassis Parts to help keep vehicles riding and handling feeling like new. With competitive limited lifetime warranty (see seller for limited warranty details) coverage and products covering all major chassis systems and alignment products for many vehicles on the road today, it's no wonder the pros rely on ACDelco Professional, premium aftermarket Chassis Parts.
MaterialRubber
Mkt_State_Warranty_CALimited Lifetime Warranty as long as original purchaser still owns vehicle (Parts Only).
Mkt_State_Warranty_USLimited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.
Product DescriptionACDelco Professional Suspension Stabilizer Bar Bushing Kits are a high quality replacement for many vehicles on the road today. These bushings isolate the stabilizer bar from the attachment mounts to your vehicle's chassis, reducing road vibration, while allowing your vehicle's suspension components to move. The kits include bushings with a polyurethane design for durability and resistance to high temperature, oils, fluids, and carbons. These premium aftermarket replacement kits meet the performance standards you would expect from ACDelco. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Programming RequiredNO
Signs of Wear & Troubleshooting - S1 B1Unexpected noises: scraping or squeaking noises when driving over road imperfections or clunking noises at the bushing mounting points may indicate worn bushings
Signs of Wear & Troubleshooting - S1 B2Difficulty steering: steering and drivability issues may signal badly worn bushings
Signs of Wear & Troubleshooting - S1 HSigns of wear include but are not limited to:
Vintage_Part_IndicatorN
33 mm Sway Bar Diameter

DOWNLOADS:

APPLICATIONS:

  • 1998-2000 Isuzu Hombre - Position: Front To Frame
  • 1996-2001 Oldsmobile Bravada - Position: Front To Frame
  • 1995-2004 Chevrolet S10 - Position: Front To Frame
  • 1995-2004 Chevrolet Blazer - Position: Front To Frame
  • 1995-2004 GMC Sonoma - Position: Front To Frame
  • 1995-2004 GMC Jimmy - Position: Front To Frame
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Product Description:
Front Suspension Stabilizer Bushing
Grade Type:
Performance
Material:
Rubber
Inside Diameter (Inch):
1.3
Programming Required:
No
Color:
Black
Grease Fitting Included:
No
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Over-sized metal rod provides strength
Features & Benefits - Bullet 4:
Wrench-flats or hex design for easy service
Features & Benefits - Bullet 3:
Full-ball stud provides smooth articulation and excellent durability
Features & Benefits - Bullet 1:
Bushing design features excellent abrasion, wear resistance, extreme temperature tolerance, and resistance to oils and fluids
FAQ - Question 1:
Do sway bars and stabilizer bars perform the same function?
Features & Benefits - Bullet 7:
Manufactured at TS 16949-certified facilities to help with consistent high-quality
Features & Benefits - Bullet 6:
Resistance to extreme temperatures, oils and abrasion
FAQ - Question 2:
Can you drive a car with a broken sway bar?
Features & Benefits - Bullet 5:
Corrosion-resistant coating
Good Maintenance Practices - Section 1 - Bullet 1:
Inspect or have your stabilizer bar bushings inspected regularly, following exposure to events that may harm the components, or when you experience signs of bushing wear.
Good Maintenance Practices - Section 1 - Bullet 2:
If you choose to replace your vehicle's stabilizer bar bushings, you should also inspect your vehicle's sway bar end links and replace them as necessary.
Life Cycle Status:
Superseded
Good Maintenance Practices - Section 1 - Bullet 3:
Unless you must remove other suspension components, replacing the stabilizer bar, its bushings, or its end links should not require a wheel alignment following installation.
Life Cycle Status Description:
Superseded - Part is being replaced by the surviving part number.
Features & Benefits - Bullet 8:
Premium, high-quality aftermarket component
Item Level GTIN:
00021625552798
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Inside Diameter (Millimeter):
33.02
Country of Origin:
United States
Weight - Each (Gross Pounds):
00.50
Weight - Case (Gross Pounds):
05.00
Height - Each (Inch):
02.75
Height - Case (Inch):
05.75
Length - Each (Inch):
05.38
Length - Case (Inch):
16.62
Width - Each (Inch):
03.31
Width - Case (Inch):
06.00



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top