×
close
click to zoom in

ACDelco 45U0158 | Universal Joint

(No reviews yet) Write a Review
$18.99
Part Number
ACD45U0158
UPC:
21625739977
Condition:
New
5 customers are viewing this product

U-Joint

BRAND: ACDelco

FEATURES:

  • alignment camber kit;alignment caster kit;ball joint bearing;ball joint bolt;ball joint;bushing;center link;center link steering;control arm;control arm bushing;drag link;idler arm;idler arm bracket;idler arm puller;pitman arm;pitman arm puller;suspension control arms;sway bar;tie rod;tie rod ball joint;tie rod end

SPECIFICS:

ACD_RemanDesNo
AltPA_3165_mm64.90
AltPA_3166_mm64.90
AltPA_6706_mm28.50
AltPA_6707_mm28.50
Bearing Cap Axis 1 Diameter1.125
Bearing Cap Axis 2 Diameter1.125
Bearing Cap TypeRounded Grooved
FAQ - A1Yes. This vibration means that the universal joint bearings have now worn enough to allow the driveshaft to move outside its normal rotational path, causing imbalance and vibration.
FAQ - A2Yes. Transmission fluid leaking from the rear of the transmission is often the result of a badly worn universal joint. The vibration will wear the transmission tail shaft bushing and damage the transmission output shaft seal, causing a fluid leak.
FAQ - Q1Can a Universal Joint cause a vibration in the vehicle drivetrain?
FAQ - Q2Can a worn Universal Joint lead to transmission fluid leaks?
Features & Benefits - B1Provide pivot points for drive shafts
Features & Benefits - B2Premium, high-quality aftermarket component
Features & Benefits - B3Provides the performance and dependability you expect from ACDelco
Good Maintenance Practices - S1 B1Inspect your universal joints for wear or missing clips.
Good Maintenance Practices - S1 B2Pull your vehicle's e-brake and put the tires on blocks.
Good Maintenance Practices - S1 B3Put your vehicle in neutral and crawl underneath it to rotate the driveshaft back and forth.
Good Maintenance Practices - S1 B4Move the driveshaft forward and backward.
Good Maintenance Practices - S1 HDriveshaft angles should not exceed 22 degrees because universal joints cannot run at higher driveshaft angles unless specially designed. Also you can:
Grade TypePERFORMANCE
GreaseableYES
Inside Yoke Lock-UpYES
Length Axis 12.55
Length Axis 22.55
Lock Ring LocationOn Bearing Cap
Marketing Statement - Product LineACDelco offers a full line of Professional, premium aftermarket Chassis Parts to help keep vehicles riding and handling feeling like new. With competitive limited lifetime warranty (see seller for limited warranty details) coverage and products covering all major chassis systems and alignment products for many vehicles on the road today, it's no wonder the pros rely on ACDelco Professional, premium aftermarket Chassis Parts.
MaterialSteel
Mkt_State_Warranty_CALimited Lifetime Warranty as long as original purchaser still owns vehicle (Parts Only).
Mkt_State_Warranty_USLimited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.
Mounting Hardware IncludedYes
Outside Yoke Lock UpNO
Product DescriptionACDelco Professional Universal Joints are a high quality replacement for many vehicles on the road today. A universal joint helps transmits power from the transmission to the rear differential through the driveshaft and allow for vertical movement of the driveshaft during its rotation. This premium aftermarket replacement component is manufactured to meet your expectations for fit, form, and function. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Programming RequiredNO
Signs of Wear & Troubleshooting - S1 B1Movement in the universal joint
Signs of Wear & Troubleshooting - S1 B2Clunking noise when accelerating, decelerating, or reversing
Signs of Wear & Troubleshooting - S1 B3Vibration while driving
Signs of Wear & Troubleshooting - S1 HSigns of wear include but are not limited to:
Snap Rings IncludedYES
Solid ShaftNO
TypeRound Grooved
Vintage_Part_IndicatorN

DOWNLOADS:

APPLICATIONS:

  • 1962-1962 Buick Wildcat - Position: CV at Center Bearing
    • Inside Lock Rings Premium Non-Greasable
  • 1961-1962 Buick Invicta - Position: CV at Center Bearing
    • Inside Lock Rings Premium Non-Greasable
  • 1966-1967 Buick Sportwagon - Position: CV at Center Bearing
    • Premium Non-Greasable
  • 1966-1967 Buick Skylark - Position: CV at Center Bearing
    • Premium Non-Greasable
  • 1963-1963 Buick Invicta - Position: CV at Center Bearing
    • Premium Non-Greasable
  • 1963-1967 Buick Wildcat - Position: CV at Center Bearing
    • Premium Non-Greasable
  • 1966-1967 Buick Special - Position: CV at Center Bearing
    • Premium Non-Greasable
  • 1961-1961 Buick Estate Wagon - Position: CV at Center Bearing
    • Inside Lock Rings Premium Non-Greasable
  • 1961-1962 Buick Electra - Position: CV at Center Bearing
    • Inside Lock Rings Premium Non-Greasable
  • 1963-1968 Buick LeSabre - Position: CV at Center Bearing
    • Premium Non-Greasable
  • 1966-1967 Buick Gran Sport - Position: CV at Center Bearing
    • Premium Non-Greasable
  • 1961-1962 Buick LeSabre - Position: CV at Center Bearing
    • Inside Lock Rings Premium Non-Greasable
  • 1963-1968 Buick Electra - Position: CV at Center Bearing
    • Premium Non-Greasable

Product type:
Aftermarket
Product Description:
U-Joint
Grade Type:
Performance
Mounting Hardware Included:
Yes
Material:
Steel
Programming Required:
No
Type:
Round Grooved
Length Axis 1 (Inch):
2.55
Length Axis 2 (Inch):
2.55
Greasable:
Yes
Outside Yoke Lock Up:
No
Bearing Cap Axis 2 Diameter (Inch):
1.125
Bearing Cap Axis 1 Diameter (Inch):
1.125
Solid Shaft:
No
Bearing Cap Type:
Rounded Grooved
Snap Rings Included:
Yes
Lock Ring Location:
On Bearing Cap
Inside Yoke Lock-Up:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Premium, high-quality aftermarket component
Life Cycle Status:
Announced
Features & Benefits - Bullet 3:
Provides the performance and dependability you expect from ACDelco
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Features & Benefits - Bullet 1:
Provide pivot points for drive shafts
Item Level GTIN:
00021625739977
FAQ - Answer 2:
Yes. Transmission fluid leaking from the rear of the transmission is often the result of a badly worn universal joint. The vibration will wear the transmission tail shaft bushing and damage the transmission output shaft seal, causing a fluid leak.
FAQ - Question 1:
Can a Universal Joint cause a vibration in the vehicle drivetrain?
FAQ - Question 2:
Can a worn Universal Joint lead to transmission fluid leaks?
FAQ - Answer 1:
Yes. This vibration means that the universal joint bearings have now worn enough to allow the driveshaft to move outside its normal rotational path, causing imbalance and vibration.
Good Maintenance Practices - Section 1 - Bullet 1:
Inspect your universal joints for wear or missing clips.
Good Maintenance Practices - Section 1 - Bullet 2:
Pull your vehicle's e-brake and put the tires on blocks.
Good Maintenance Practices - Section 1 - Bullet 3:
Put your vehicle in neutral and crawl underneath it to rotate the driveshaft back and forth.
Good Maintenance Practices - Section 1 - Bullet 4:
Move the driveshaft forward and backward.
Good Maintenance Practices - Section 1 - Header:
Driveshaft angles should not exceed 22 degrees because universal joints cannot run at higher driveshaft angles unless specially designed. Also you can:
Length Axis 1 (Millimeter):
64.9
Length Axis 2 (Millimeter):
64.9
Bearing Cap Axis 2 Diameter (Millimeter):
28.5
Country of Origin:
United States
Weight - Each (Gross Pounds):
01.20
Weight - Case (Gross Pounds):
30.00
Height - Each (Inch):
01.50
Height - Case (Inch):
04.40
Length - Each (Inch):
03.70
Length - Case (Inch):
18.60
Width - Each (Inch):
03.70
Width - Case (Inch):
07.60



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top