×
close
click to zoom in

ACDelco 88935988 | Rear Right Brake Dust Shield

(No reviews yet) Write a Review
$50.99
Part Number
ACD88935988
UPC:
00707773764121
Condition:
New
5 customers are viewing this product
ACDelco GM Original Equipment Brake Dust Shields protect your wheels from brake pad dust, and are GM-recommended replacements for your vehicle's original components. These brake dust shields have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Chevrolet;GMC;Oldsmobile
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Manufactured with GM Original Equipment specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE

SPECIFICS:

ColorBlack
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)3.3
MaterialSteel
Mount Hole Quantity4
Mounting Hardware IncludedNo
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Chirping or grinding noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - HeaderGeneral brake signs of wear include:
Weight (lb)1.5
FOR 1ST DES SEE 12376044 2nd Design VEHS W/VINS 1GNDT13W4VK203068(CHEVY), 1GHDT13W8V2715385(OLDS), 1GNDT13WOV2191906(CHEVY), 1GKDT13W5V2541124(GMC) & AFTER AND 75MM PILOT DIA.

DOWNLOADS:

APPLICATIONS:

  • 1997-2005 Chevrolet Blazer - Position: Rear Right
  • 1997-2001 Oldsmobile Bravada - Position: Rear Right
  • 1998-2004 Chevrolet S10 - Position: Rear Right
  • 1998-2005 GMC Jimmy - Position: Rear Right
  • 1998-2004 GMC Sonoma - Position: Rear Right
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Product Description:
Rear Passenger Side Brake Dust Shield
Mounting Hardware Included:
No
Material:
Steel
Programming Required:
No
Color:
Black
Length (Inch):
12.6
Width (Inch):
12.3
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3:
Manufactured with GM Original Equipment specification for fit, form, and function
Features & Benefits - Bullet 1:
GM-recommended replacement part for your GM vehicle's original factory component
Weight (lb) (Pound):
1.5
Height (in) (Inch):
3.3
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Life Cycle Status:
Announced
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Item Level GTIN:
00707773764121
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Mount Hole Quantity:
4
Country of Origin:
Australia
Weight - Each (Gross Pounds):
01.50
Height - Each (Inch):
03.30
Length - Each (Inch):
12.60
Width - Each (Inch):
12.30



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top