×
close
click to zoom in

ACDelco 9718D | Spark Plug Wire Set

(No reviews yet) Write a Review
$41.64
Part Number
ACD9718D
UPC:
00707773322147
Condition:
New
5 customers are viewing this product
ACDelco Professional Spark Plug Wire Sets consist of a set of wires, encased in an insulating material, connectors, and insulating boots, and are a high quality replacement for many vehicles on the road today. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plugs. These premium aftermarket replacement components are manufactured to meet your expectations for fit, form, and function. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Chevrolet;Chevrolet;GMC;GMC
  • Manufactured to meet expectations for fit, form, and function
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco

SPECIFICS:

Boot ColorBlack
Boot TypeSolid
Coil End Boot ColorBlack
Core MaterialFiberglass Reinforced Latex Graphite
Distributor Coil End Boot TypeEPDM Rubber
Distributor Coil End Terminal TypeSnap Lock
FAQ - Answer 1Yes. The use of dielectric grease in the boot helps prevent spark flashover and allows easier boot removal in the future.
FAQ - Question 1Should grease be installed into a spark plug boot?
Good Maintenance Practices - Section 1 - Bullet 1Before purchasing and installing a spark plug wire, make sure they are the correct size and fit for your vehicle.
Good Maintenance Practices - Section 1 - Bullet 2Remove the wire by holding the boot, not the wire.
Good Maintenance Practices - Section 1 - Bullet 3Keep plug wires free from contact with other engine components.
Good Maintenance Practices - Section 1 - Bullet 4Reinstall plug wires in the original position, using correct routing and utilizing appropriate hold downs.
Good Maintenance Practices - Section 1 - Bullet 5Regularly inspect your spark plug wires for signs of damage or wear, and replace them if signs of damage are found.
Height (in)6
Insulation ColorBlack
Insulation MaterialSilicone
Length (in)40.2
Length (mm)1021
Maximum Wire Length (mm)1021
Noise Suppression TypeYes
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Engine misfire
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Wires worn from contact with other components
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Sparks visible from plug wire grounding on any metal surface
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Illuminated Check Engine light
Signs of Wear & Troubleshooting - Section 1 - HeaderSigns of wear for spark plug wires include but are not limited to:
Spark Plug Boot MaterialHi Temp Silicone
Spark Plug End Boot ColorBlack
Spark Plug End Boot MaterialHi Temp Silicon
Spark Plug End Boot Quantity Angled8
Spark Plug End Boot Quantity Straight0
Spark Plug End Terminal TypeSnap Lock
Universal Or Specific FitSpecific
Weight (lb)1.28
Width (in)10
Wire Separators IncludedNo
w/ Heavy Duty Emissions

DOWNLOADS:

APPLICATIONS:

  • 1994-1995 Chevrolet C2500 Suburban
  • 1994-1994 Chevrolet Blazer
  • 1994-1995 GMC Yukon
  • 1994-1995 GMC K1500
  • 1994-1995 Chevrolet K1500
  • 1994-1995 GMC G3500
  • 1995-1995 GMC G2500
  • 1994-1995 Chevrolet K1500 Suburban
  • 1994-1995 GMC C2500
  • 1994-1995 GMC K2500 Suburban
  • 1994-1995 GMC K2500
  • 1994-1995 Chevrolet K2500
  • 1994-1995 Chevrolet G30
  • 1994-1995 Chevrolet K2500 Suburban
  • 1995-1995 Chevrolet G20
  • 1994-1995 Chevrolet C3500HD
  • 1994-1995 GMC C3500HD
  • 1994-1995 GMC K1500 Suburban
  • 1995-1995 Chevrolet Tahoe
  • 1994-1995 Chevrolet K3500
  • 1994-1995 GMC C1500 Suburban
  • 1994-1995 Chevrolet C2500
  • 1994-1995 GMC C2500 Suburban
  • 1995-1995 Chevrolet W4500 Tiltmaster
  • 1994-1995 GMC C1500
  • 1994-1995 Chevrolet C1500
  • 1994-1995 Chevrolet C3500
  • 1994-1995 Chevrolet C1500 Suburban
  • 1994-1995 GMC K3500
  • 1994-1995 GMC C3500
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Product Description:
Spark Plug Wire Set
Universal Or Specific Fit:
Specific
Programming Required:
No
Core Material:
Fiberglass Reinforced Latex Graphite
Insulation Material:
Silicone
Insulation Color:
Black
Boot Color:
Black
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Provides the performance and dependability you expect from ACDelco
Features & Benefits - Bullet 3:
Manufactured to meet expectations for fit, form, and function
Features & Benefits - Bullet 1:
Professional, premium aftermarket replacement
Weight (lb) (Pound):
1.28
Height (in) (Inch):
6
Width (in) (Inch):
10
Length (in) (Inch):
40.2
Signs of Wear & Troubleshooting - Section 1 - Bull:
Illuminated Check Engine light
FAQ - Question 1:
Should grease be installed into a spark plug boot?
FAQ - Answer 1:
Yes. The use of dielectric grease in the boot helps prevent spark flashover and allows easier boot removal in the future.
Good Maintenance Practices - Section 1 - Bullet 1:
Before purchasing and installing a spark plug wire, make sure they are the correct size and fit for your vehicle.
Life Cycle Status:
Announced
Good Maintenance Practices - Section 1 - Bullet 2:
Remove the wire by holding the boot, not the wire.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 1 - Bullet 3:
Keep plug wires free from contact with other engine components.
Item Level GTIN:
00707773322147
Good Maintenance Practices - Section 1 - Bullet 4:
Reinstall plug wires in the original position, using correct routing and utilizing appropriate hold downs.
Good Maintenance Practices - Section 1 - Bullet 5:
Regularly inspect your spark plug wires for signs of damage or wear, and replace them if signs of damage are found.
Length (mm) (Millimeter):
1021
Outside Diameter (Millimeter):
7
Spark Plug End Boot Quantity Angled:
8
Insulation Outside Diameter (Inch):
0.27
Spark Plug End Boot Quantity Straight:
0
Insulation Outside Diameter (Millimeter):
7
Spark Plug End Boot Color:
Black
Coil End Boot Color:
Black
Wire Separators Included:
No
Spark Plug Boot Material:
Hi Temp Silicone
Distributor Coil End Boot Type:
EPDM Rubber
Distributor Coil End Terminal Type:
Snap Lock
Spark Plug End Terminal Type:
Snap Lock
Boot Type:
Solid
Noise Suppression Type:
Yes
Resistance (Ohm):
30000
Spark Plug End Boot Degree (Degrees):
90
Maximum Wire Length (mm) (Millimeter):
1021
Spark Plug End Boot Material:
Hi Temp Silicon
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
01.28
Weight - Case (Gross Pounds):
07.68
Height - Each (Inch):
06.00
Height - Case (Inch):
06.50
Length - Each (Inch):
03.80
Length - Case (Inch):
18.62
Width - Each (Inch):
10.00
Width - Case (Inch):
11.75



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top