| Anti Lock Braking System | Yes |
| Anti Lock Braking System Type | Sensor |
| Bolt Circle Diameter (in) | 4.528 |
| Bolt Circle Diameter (mm) | 115 |
| Connector Gender | Female |
| Connector Quantity | 1 |
| Connector Terminal Quantity | 2 |
| FAQ - Answer 1 | Yes. The nut should be torqued to the specifications found in the vehicle's service manual. |
| FAQ - Answer 2 | Yes. It is normal for the bearing to have some movement inside the hub assembly; this movement is controlled to a specification. |
| FAQ - Answer 3 | Yes, in some cases replacement hub assemblies come with ABS cables because most vehicles are now equipped with ABS. For non-ABS vehicles the cable can be cut off before hub installation. |
| FAQ - Question 1 | Are there specifications I should check to see how tight the center hub bearing attachment nut should be? |
| FAQ - Question 2 | Is it normal for the bearing to have back-and-forth movement inside the hub assembly? |
| FAQ - Question 3 | Can I use a replacement hub assembly that comes with an ABS cable when my vehicle does not have ABS? |
| Flange Bolt Hole Quantity | 3 |
| Flange Bolts Included | No |
| Flange Shape | Triangular |
| Good Maintenance Practices - Section 1 - Bullet 1 | Keep wheel lug nuts at proper torque and do not overtighten center hub bearing to constant velocity shaft nut. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Follow the manufacturers recommended torque specification. |
| Height (in) | 6.5 |
| Length (in) | 9.1 |
| Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Grinding or humming noise from hub assembly maybe more noticeable while turning |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Tire and wheel vibration |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Excessive play at tire and wheel |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Wheel hot to the touch |
| Signs of Wear & Troubleshooting - Section 1 - Header | Signs of wear for wheel bearing and hub assemblies include but are not limited to: |
| Spline Quantity | 33 |
| Terminal Gender | Male |
| Weight (lb) | 7.5 |
| Wheel Stud Quantity | 6 |
| Wheel Studs Included | Yes |
| Width (in) | 8.5 |
ACDelco
ACDelco GM Original Equipment Wheel Bearing and Hub Assembly supports the vehicle while allowing the wheel to rotate, and are GM-recommended replacements for your vehicle's original components. This...
ACDelco
ACDelco Gold (Professional) Wheel Bearing and Hub Assemblies are the high quality alternative to Original Equipment (OE) parts. These unitized wheel bearings contain dual ball or tapered roller...
ACDelco
ACDelco Gold (Professional) Wheel Bearing and Hub Assemblies are the high quality alternative to Original Equipment (OE) parts. These unitized wheel bearings contain dual ball or tapered roller...
ACDelco
Rear Wheel Hub and Bearing Assembly with Wheel Speed SensorBRAND: ACDelcoFEATURES:Alternator Drive End Bearing; Axle Shaft Seal; Bearing; Crankshaft Oil Seal; Differential Bearing; Camshaft Cover...
ACDelco
ACDelco Gold (Professional) Wheel Bearing and Hub Assemblies are the high quality alternative to Original Equipment (OE) parts. These unitized wheel bearings contain dual ball or tapered roller...
