×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco MU2295 | Fuel Pump and Sender Assembly
click to zoom in

ACDelco MU2295 | Fuel Pump and Sender Assembly

(No reviews yet) Write a Review
$317.39
Part Number
ACDMU2295
UPC:
00808709443711
Condition:
New
5 customers are viewing this product

video gallery

Description
ACDelco Gold (Professional) Fuel Pump and Sender Assemblies are a high quality alternative to Original Equipment (OE) parts. A fuel pump and sender assembly is submerged inside of a fuel tank which is common among most electronic fuel-injected vehicles. This is comprised of a connector, pump body, and fuel lever sender. A connector is located near the top of the fuel tank, which is used to supply power and ground for the fuel pump and sensing wires of the fuel level sender. The pump body is where an electric motor is mounted to a small vein pump which picks up gas and then pressurizes the fuel system. The fuel level sender is attached to the fuel pump housing. This float rides on the fuel level while the sensing resistor provides feedback data for the fuel gauge. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Chevrolet;GMC
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
  • Premium aftermarket replacement part
  • Provides steady reliable fuel supply
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Supplies precise measurement of fuel levels in tank

SPECIFICS:

Connector GenderMale
Connector ShapeOval, Square
FAQ - Answer 1Yes. Always consult the Vehicle Owner's manual or an expert technician before making any repairs or adjustments.
FAQ - Answer 2On most assembly's the pump can be purchased separately check with your parts provider.
FAQ - Answer 3The assembly is located in the fuel tank submerged in the fuel.
FAQ - Question 1Should the Vehicle Owner's manual or an expert technician be consulted before making any repairs or adjustments?
FAQ - Question 2Can the pump be replaced without replacing the complete assembly
FAQ - Question 3Where is the assembly located?
Good Maintenance Practices - Section 1 - Bullet 1Before installation, ensure the area is clear of dirt and debris, especially the mating surface where the new seal will be placed.
Good Maintenance Practices - Section 1 - Bullet 2Replace fuel filter at manufacturers recommendation
Good Maintenance Practices - Section 1 - Bullet 3Use recommended octane fuel for your vehicle
Good Maintenance Practices - Section 1 - Bullet 4Use only recommended fuel additives
Good Maintenance Practices - Section 1 - Bullet 5Regularly inspect fuel pump and sender assemblies for signs of damage or wear, and replace them if signs of damage are found
Height (in)6.65
Inlet Diameter (in)0.38
Inlet Diameter (mm)9.53
Inlet Header Length (mm)9.53
Inlet TypeMale Quick Connect
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Outlet Diameter (in)0.31
Outlet Diameter (mm)7.94
Outlet Quantity1
Outlet TypeMale Quick Connect
Programming RequiredNo
Seal And Lock Ring IncludedYes
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Poor engine performance
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Loss of fuel readings at gauge
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Loud humming noise from pump
Signs of Wear & Troubleshooting - Section 1 - HeaderSigns of wear for fuel pump and sender assemblies include but are not limited to:
Terminal GenderMale
Terminal Quantity7
Terminal TypeBlade Pin
Volume (in?765.08
Weight (lb)2.23
Width (in)9.75
Wire Quantity4

DOWNLOADS:

APPLICATIONS:

  • 2002-2004 Chevrolet Suburban 1500
  • 2002-2004 GMC Yukon XL 1500
Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Part Type:
Aftermarket
Product Description:
Fuel Pump and Level Sensor Module
Terminal Type:
Blade Pin
Terminal Gender:
Male
Connector Gender:
Male
Terminal Quantity:
7
Programming Required:
No
Connector Shape:
Oval, Square
Length (Inch):
6.55
Wire Quantity:
4
Depth (Inch):
7.87
Outlet Quantity:
1
Inlet Type:
Male Quick Connect
Outlet Type:
Male Quick Connect
Seal And Lock Ring Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Supplies precise measurement of fuel levels in tank
Features & Benefits - Bullet 4:
Premium aftermarket replacement part
Features & Benefits - Bullet 3:
Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features & Benefits - Bullet 1:
Provides steady reliable fuel supply
Life Cycle Status:
Announced
Weight (lb) (Pound):
3.44
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Height (in) (Inch):
1.45
Item Level GTIN:
00808709443711
Width (in) (Inch):
6.65
Signs of Wear & Troubleshooting - Section 1 - Bull:
Loss of fuel readings at gauge
Signs of Wear & Troubleshooting - Section 1 - Bull:
Loud humming noise from pump
Signs of Wear & Troubleshooting - Section 1 - Bull:
Poor engine performance
FAQ - Answer 2:
On most assembly's the pump can be purchased separately check with your parts provider.
FAQ - Question 3:
Where is the assembly located?
FAQ - Question 1:
Should the Vehicle Owner's manual or an expert technician be consulted before making any repairs or adjustments?
FAQ - Question 2:
Can the pump be replaced without replacing the complete assembly
Signs of Wear & Troubleshooting - Section 1 - Head:
Signs of wear for fuel pump and sender assemblies include but are not limited to:
Features & Benefits - Bullet 5:
Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
FAQ - Answer 1:
Yes. Always consult the Vehicle Owner's manual or an expert technician before making any repairs or adjustments.
Good Maintenance Practices - Section 1 - Bullet 1:
Before installation, ensure the area is clear of dirt and debris, especially the mating surface where the new seal will be placed.
Good Maintenance Practices - Section 1 - Bullet 2:
Replace fuel filter at manufacturers recommendation
Good Maintenance Practices - Section 1 - Bullet 3:
Use recommended octane fuel for your vehicle
Good Maintenance Practices - Section 1 - Bullet 4:
Use only recommended fuel additives
FAQ - Answer 3:
The assembly is located in the fuel tank submerged in the fuel.
Good Maintenance Practices - Section 1 - Bullet 5:
Regularly inspect fuel pump and sender assemblies for signs of damage or wear, and replace them if signs of damage are found
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Depth (Millimeter):
199.9
Maximum Pressure (Pounds per Square Inch):
55.11
Volume (cu in):
765.08 cu in
Inlet Header Length (mm) (Millimeter):
9.53
Outlet Diameter (in) (Inch):
0.31
Outlet Diameter (mm) (Millimeter):
7.94
Inlet Diameter (in) (Inch):
0.38
Inlet Diameter (mm) (Millimeter):
9.53
Country of Origin:
China
Weight - Each (Gross Pounds):
02.17
Height - Each (Inch):
09.50
Length - Each (Inch):
15.12
Width - Each (Inch):
14.12



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top