ACDelco
ACDelco PF691G | Engine Oil Filter
ACDelco Gold (Professional) Engine Oil Filters are a high quality alternative to Original Equipment (OE) parts. These engine oil filters help trap debris and other contaminants before they enter the...
Anti-Drain Back Valve | Yes |
FAQ - Answer 1 | Yes, because they meet efficiency, capacity, hydroburst pressure, element collapse, and anti-drain back leakage tests. |
FAQ - Answer 2 | Yes, because it ensures your engine is lubricated with clean oil which ensures optimal engine performance. See your vehicle owner's manual for the recommended oil change interval, or follow the oil life monitoring system, if equipped. |
FAQ - Answer 3 | Yes, having your oil and oil filter changed, at least as often as recommended by the manufacturer, is important. |
FAQ - Answer 4 | Yes, it's important to use the recommended grade of oil for your vehicle for the best protection and fuel mileage. |
FAQ - Answer 5 | Yes, drain the oil out of the oil filter and bring it to a recycling center that accepts filters. |
FAQ - Question 1 | Do ACDelco Oil Filters meet or exceed GM OE specifications? |
FAQ - Question 2 | Does regularly changing my oil filter increase the life of my engine? |
FAQ - Question 3 | Do I need a new filter every time I get an oil change? |
FAQ - Question 4 | Can oil filters be used with conventional and synthetic motor oils? |
FAQ - Question 5 | Is there a proper way to recycle oil filters? |
Filter Type | Spin on |
Gasket Inner Diameter (mm) | 77.3 mm |
Gasket Outer Diameter (mm) | 85.8 mm |
Good Maintenance Practices - Section 1 - Bullet 1 | Replacing your vehicle's filters on a regularly scheduled basis will help the vehicle run better and last longer. (Refer to your owner's manual for your vehicle's specific filter change intervals). |
Good Maintenance Practices - Section 1 - Bullet 2 | Use the recommended grade of oil for your vehicle for the best protection and fuel mileage. |
Inner Diameter Bottom (in) | 3.58 |
Inner Diameter Bottom (mm) | 91.1 |
Inner Diameter Top (in) | 3.58 |
Inner Diameter Top (mm) | 91.1 |
Programming Required | No |
Proper Disposal Image | PL42_PD_OilFilter.pdf |
Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Dark, dirty appearing oil |
Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Low oil pressure light turns on |
Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | External oil leak from the engine |
Signs of Wear & Troubleshooting - Section 1 - Header | Due to a restricted filter, a failed internal bypass, or a failed O-ring seal, these problems may occur: |