Specialty Products Company / SPC Performance

This full contact rear shim adds positive 0.75° camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake Caliper shim included for correct hub to...

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight...

These full contact rear shims will correct camber and/or toe. Combination adjustments, or changes up to 1 degree may be achieved by using 2 shims on each wheel. NOTE: Do NOT adjust Camber or Toe over...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding...

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding...

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap...

Change camber,caster, or both on twin traction beam Dana 44s with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve...

Ford changed the axle design in 2005 on their Heavy Duty trucks. These sleeves correct camber and caster on these F250 and F350 Super Duty trucks. Use the 23229 zero degree sleeve to determine the...

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...

Fix front camber issues on your Jeep Wrangler (JL) by replacing the camber sleeve that links the upper ball joint to knuckle. Simply determine what degree offset sleeve is already in the knuckle and...

Pro Series Ball Joint plates complete your adjustable control arm along with O.E. style ball joints (sold separately). This ball joint plate is flat at 0° and uses a Chrysler screw-in ball joint...

These truck sleeve will correct alignment problems on the F450 and F550 Super Duty trucks with Dana Super 60 solid axles. To split camber and caster adjustment, rotate sleeve 45° Use the 23239...

Factory camber adjustment on the rear of the BMW 1 & 3 Series is limited and often not enough. Use SPC's rear camber arm to get an additional ±3° of camber on the E90, E91, E92, &...

These wrenches makes presetting our adjustable truck sleeves (24160,24180,24120,24130) easier for the installer. When using the 74400 wrench it is recommended that the opening be equally positioned...

This 1-1/2" socket is useful for adjusting both the OEM and our popular 23130 & 23180 sleeve series for Ford and Mazda 2 & 4WD trucks with pinch bolt style suspension. FOR 1/2"...