×
close

Cardone 18-P4020 | Front Right Disc Brake Caliper

(No reviews yet) Write a Review
$64.59
Part Number
CAD18-P4020
UPC:
00884548156692
Condition:
New
5 customers are viewing this product
CARDONE Ultra(TM) Premium Calipers feature an exclusive, silver weather-proof coating that protects against rust and corrosion. Since 2002, over 70% of new vehicles have come with premium, open-spoke wheels, so high-end appearance and performance are important to today's car owner. CARDONE Ultra(TM) Premium Calipers deliver both, as they are backed by over 45 years of remanufacturing expertise. With all the installation hardware provided in the box, including banjo bolt and mounting bracket, these calipers are a snap to install. Between the premium appearance, reliable performance and easy installation, CARDONE Ultra(TM) Premium Calipers truly go “above and beyond” the average brake caliper.

BRAND: Cardone Ultra

FEATURES:

  • Buick Electra 1989-78, Estate Wagon 1983-78, LeSabre 1990-78, Riviera 1978, Roadmaster 1996-91, Skylark 1979-78; Cadillac Brougham 1992-87, Commercial Chassis 1996-92, DeVille 1984-78, Fleetwood 1996-93 1986-78, Seville 1979-78; Chevrolet Astro 2002-85, B
  • Caliper, Brake Caliper, Disc Brake Caliper, Unloaded Caliper, Unloaded Brake Caliper, Power Brake Caliper, Hydraulic Disc Brake Caliper, Brakes
  • Premium Unloaded Caliper
  • Reman. Premium Unloaded Caliper
  • Remanufactured Premium Unloaded Caliper

SPECIFICS:

Bleeder Port SizeM10X1.5
Brake Caliper FinishPowder Coated
Caliper ColorSilver
E-WasteNo
FAQsBrake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQsNot recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQsNew hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
FAQsAs a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAQsDo all of your Calipers come with the new hardware and a mounting bracket for installation?
FAQsA silicone grease is used on floating caliper mounting pins.
FAQsCar pulls to one side during braking. Why?
FAQsWhat type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQsCould calipers be the cause of a low brake pedal?
FAQsA symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAQsBrakes squeal all of the time. What's causing the squeal?
FAQsInspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQsCan I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQsWhat type of grease is used on floating caliper mounting pins?
Features and BenefitsMounting bracket is included where applicable for a hassle-free installation.
Features and BenefitsNew banjo bolts are included where applicable to ensure a perfect fit and quick installation.
Features and BenefitsPistons are durable, resistant to cracking or pitting and handle great loads.
Features and BenefitsA plastic cap plug protects every brake port thread to ensure a trouble free installation.
Features and BenefitsNew bleeder screws provide trouble-free bleeding and a positive seal.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsNew washers are included where applicable for a proper seal.
Features and BenefitsRubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Features and BenefitsAn exclusive silver weather-proof coating that stops rust from forming, maintaining a showroom appearance.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Inlet Port SizeM10X1.5
Installation Hardware IncludedYes
Mounting Bolts IncludedNo
Package ContentsCaliper; Hardware Kit
Pads IncludedNo
Piston MaterialSteel
Piston Quantity1
Product ConditionRemanufactured
WARRANTY TIME: 120 Months

INTERCHANGE:

  • Pontiac: 18005265
  • Cadillac: 18015428
  • Buick: 18012309
  • Oldsmobile: 18015428
  • Buick: 18015428
  • Cadillac: 18005265
  • Chevrolet: 18005265
  • Pontiac: 18007946
  • Chevrolet: 18015428
  • Buick: 18005265
  • Oldsmobile: 18005265
  • Chevrolet: 18012309
  • Pontiac: 18003761
  • Oldsmobile: 18007946
  • GMC: 18015428
  • Oldsmobile: 18012309
  • Pontiac: 18012309
  • Oldsmobile: 18003761
  • Pontiac: 18015428
  • Chevrolet: 18020904
  • Cadillac: 18012309

APPLICATIONS:

  • 1981-1981 Chevrolet Bel Air - Position: Front Right
  • 1987-1989 Pontiac Safari - Position: Front Right
  • 1987-1987 GMC R1500 - Position: Front Right
  • 1991-1996 Buick Roadmaster - Position: Front Right
  • 1978-1984 Cadillac DeVille - Position: Front Right
  • 1978-1981 Pontiac Bonneville - Position: Front Right
  • 1993-1996 Cadillac Fleetwood - Position: Front Right
  • 1994-1996 Chevrolet Impala - Position: Front Right
  • 1978-1979 Chevrolet Nova - Position: Front Right
  • 1978-1981 Pontiac Firebird - Position: Front Right
  • 1978-1981 Pontiac Catalina - Position: Front Right
  • 1978-1986 Cadillac Fleetwood - Position: Front Right
  • 1992-1996 Cadillac Commercial Chassis - Position: Front Right
  • 1978-1981 Pontiac Laurentian - Position: Front Right
  • 1978-1979 Oldsmobile Omega - Position: Front Right
  • 1978-1979 Buick Skylark - Position: Front Right
  • 1978-1990 Buick LeSabre - Position: Front Right
  • 1978-1978 Buick Riviera - Position: Front Right
  • 1978-1981 Chevrolet Camaro - Position: Front Right
  • 1978-1996 Chevrolet Caprice - Position: Front Right
  • 1978-1983 Buick Estate Wagon - Position: Front Right
  • 1978-1979 Cadillac Seville - Position: Front Right
  • 1981-1986 Chevrolet C10 - Position: Front Right
  • 1985-2002 Chevrolet Astro - Position: Front Right
  • 1978-1989 Buick Electra - Position: Front Right
  • 1978-1979 Pontiac Phoenix - Position: Front Right
  • 1978-1992 Oldsmobile Custom Cruiser - Position: Front Right
  • 1978-1984 Oldsmobile 98 - Position: Front Right
  • 1978-1985 Oldsmobile Delta 88 - Position: Front Right
  • 1978-1986 Pontiac Parisienne - Position: Front Right
  • 1987-1987 Chevrolet R10 - Position: Front Right
  • 1985-2002 GMC Safari - Position: Front Right
  • 1978-1985 Chevrolet Impala - Position: Front Right
  • 1987-1992 Cadillac Brougham - Position: Front Right
  • 1981-1986 GMC C1500 - Position: Front Right
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Features and Benefits:
Expertly remanufactured to rigorous quality and performance standards, all CARDONE Brake Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressur
Brand Description:
Brake Caliper
Hazardous Material:
No
Minimum Order Quantity:
1
Package Contents:
Caliper; Hardware Kit
Installation Hardware Included:
Yes
Product Condition:
Remanufactured
E-Waste:
No
FAQs:
A silicone grease is used on floating caliper mounting pins.
FAQs:
What type of grease is used on floating caliper mounting pins?
FAQs:
What type of fluid should I use: DOT 3, DOT 4, or DOT 5?
FAQs:
Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturer’s recommendations.
FAQs:
New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
FAQs:
Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAQs:
Do all of your Calipers come with the new hardware and a mounting bracket for installation?
FAQs:
Can I switch out a Phenolic Piston Caliper for a Steel Piston Caliper or vice versa?
FAQs:
Could calipers be the cause of a low brake pedal?
FAQs:
Car pulls to one side during braking. Why?
FAQs:
Brakes squeal all of the time. What's causing the squeal?
FAQs:
Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAQs:
As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
Life Cycle Status:
Available to Order
FAQs:
A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Features and Benefits:
Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
Item Level GTIN:
00884548156692
Features and Benefits:
Pistons are durable, resistant to cracking or pitting and handle great loads.
Quantity Per Application:
1
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and Benefits:
New washers are included where applicable for a proper seal.
Features and Benefits:
New stainless steel hardware clips and new mounting pins are included where applicable.
Features and Benefits:
New bleeder screws provide trouble-free bleeding and a positive seal.
Features and Benefits:
New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
Features and Benefits:
Mounting bracket is included where applicable for a hassle-free installation.
Features and Benefits:
Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
A plastic cap plug protects every brake port thread to ensure trouble-free installation.
Caliper Color:
Silver
Piston Quantity:
1
Piston Material:
Steel
Brake Caliper Finish:
Powder Coated
Pads Included:
No
Mounting Bolts Included:
No
Piston Size (OD) (in):
2.935
Mounting Type:
0.398
Bleeder Port Size:
M10X1.5
Short Description:
Caliper
Country of Origin:
United States
Weight - Each (Gross Pounds):
9.3000
Height - Each (Inch):
5.2500
Length - Each (Inch):
9.6250
Width - Each (Inch):
7.3750



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top