×
close

Cardone 26-2310 | Rack and Pinion Assembly

(No reviews yet) Write a Review
$253.91
Part Number
CAD26-2310
UPC:
00082617762243
Condition:
New
5 customers are viewing this product
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

BRAND: Cardone Reman

FEATURES:

  • Rack and Pinion Assembly
  • Rack and Pinion, Rack and Pinion Complete Unit, Complete Rack, EPS
  • Reman. Rack and Pinion Assembly
  • Remanufactured Rack and Pinion Assembly
  • Subaru Impreza 2009-08, Legacy 2009-05, Outback 2009-05

SPECIFICS:

Casting MaterialSteel; Aluminum
Distance Between Mounting Holes (in)3.38
Distance Between Mounting Holes (mm)85.73
E-WasteNo
FAQsThis symptom is classified as "morning sickness". This condition is caused by Teflon sealing rings on the spool valve wearing grooves in the aluminum housing of the rack and pinion resulting in an internal bypass of pressure. Once the housing warms up, the metal will expand and reduce the pressure loss. The rack and pinion must be replaced.
FAQsThe most likely cause of power steering pump whine is air in the system. The Steering system must be bled completely.
FAQsFor the first few minutes of driving my car, the steering is hard. Is the rack and pinion bad or the power steering pump?
FAQsThe rack and pinion does not return to center by itself. The geometry of the front suspension causes the wheels to return to center coming out of a turn. If the vehicle will not return to center, first, check the front end alignment, then, check for a restricted return line in the power steering system. If the return line is restricted or kinked, this could be blocking the flow of fluid back to the pump.
FAQsI replaced the rack and now the power steering pump is whining. What happened? It never did this before!
FAQsSteering not returning to center coming out of a turn. What could be causing this?
Features and BenefitsValve housings have polished micro-finish sleeves for durability (where applicable).
Features and BenefitsFinished in protective coating to prevent corrosion and rust.
Features and Benefits100% replacement of rubber sealing components.
Features and BenefitsEach unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
Features and BenefitsApplication of specialized lubricant(s) for extended life.
Features and BenefitsAll new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Hose Port TypeSeat
Input Shaft Diameter (in)0.69
Input Shaft Diameter (mm)17.42
Input Shaft Length (in)2.94
Input Shaft Length (mm)74.60
Number of Mounting Holes2
Package ContentsRack and Pinion, Instruction Sheet
Pressure Port Thread SizeM14 x 1.5
Product ConditionRemanufactured
Rack Length (in)47.50
Rack Length (mm)1206.50
Return Port Thread SizeM16 x 1.5
Steering Rack ColorBlack
Thread Length (in)2.18
Thread Length (mm)55.37
Tie Rod Ends IncludedYes
Total Turns Lock to Lock2.88
WARRANTY TIME: 36 Months

INTERCHANGE:

  • Subaru: 34110FG0209L
  • Subaru: 34110FG020
  • Subaru: 34110AG06A
  • Subaru: 34110AG05A

APPLICATIONS:

  • 2005-2009 Subaru Outback
  • 2008-2009 Subaru Impreza
  • 2005-2009 Subaru Legacy
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Features and Benefits:
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE&
Brand Description:
Rack and Pinion Assembly
Grade Type:
Regular
Hazardous Material:
No
Minimum Order Quantity:
1
Package Contents:
Rack and Pinion; Instruction Sheet
Installation Hardware Included:
No
Product Condition:
Remanufactured
E-Waste:
No
FAQs:
The most likely cause of power steering pump whine is air in the system. The Steering system must be bled completely.
FAQs:
Steering not returning to center coming out of a turn. What could be causing this?
FAQs:
I replaced the rack and now the power steering pump is whining. What happened? It never did this before!
FAQs:
For the first few minutes of driving my car, the steering is hard. Is the rack and pinion bad or the power steering pump?
Features and Benefits:
Finished in protective coating to prevent corrosion and rust.
Features and Benefits:
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
Application of specialized lubricant(s) for extended life.
Features and Benefits:
100% replacement of rubber sealing components.
Rack Length (in):
47.50
Steering Rack Color/Finish:
Black
Tie Rod Ends Included:
Yes
Life Cycle Status:
Available to Order
Total Turns Lock to Lock:
3.19
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Rack Length (mm):
1206.50
Item Level GTIN:
00082617762243
Distance Between Mounting Holes (in):
3.38
Quantity Per Application:
1
Distance Between Mounting Holes (mm):
85.73
Input Shaft Diameter (in):
0.69
Input Shaft Diameter (mm):
17.42
Input Shaft Length (in):
2.94
Input Shaft Length (mm):
74.61
Casting Material:
Steel; Aluminum
Mounting Brackets Included:
No
Gasket or Seal Included:
Yes
Outer Tie Rods Included:
No
Bellows Color:
Black
Steering Input Shaft Spline Quantity:
36
Number of Mounting Holes:
2
Short Description:
Rack and Pinion
Warranty:
Hydraulic
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
17.5000
Height - Each (Inch):
6.5000
Length - Each (Inch):
48.7500
Width - Each (Inch):
10.2500



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top