×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Cardone 96-7922 | Power Steering Pump
click to zoom in

Cardone 96-7922 | Power Steering Pump

(No reviews yet) Write a Review
$139.49
Part Number
CAD96-7922
UPC:
82617712804
Condition:
New
5 customers are viewing this product

video gallery

Description

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals and reservoirs for easy installation and reliability you can count on.

BRAND: Cardone New

FEATURES:

  • Chevrolet Blazer 1988-87, R10 1987, R10 Suburban 1988-87, R20 1988-87, R20 Suburban 1988-87, R2500 1989, V10 1987, V10 Suburban 1988-87, V20 1987, V20 Suburban 1988-87; GMC Jimmy 1988-87, R1500 1987, R1500 Suburban 1988-87, R2500 1989-87, R2500 Suburban 1988-87, V1500 1987, V1500 Suburban 1988-87, V2500 1987, V2500 Suburban 1988-87
  • Power Steering Pump
  • New Power Steering Pump
  • New Power Steering Pump
  • Power Steering Pump
  • Power Steering Pump, Steering Pump, Pump, Pump and Reservior

SPECIFICS:

E-WasteNo
FAQsWhy is the pump making a whining noise all of the time?
FAQsI only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAQsThere may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed.
FAQsWhy do I still have hard steering in one direction after I replaced the pump?
FAQsYes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
FAQsA whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures.
FAQsThe pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.
FAQsI bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
FAQsShould I ever change my fluid, even though nothing is wrong?
FAQsThe problem is most likely in the steering unit-the pump does not know left from right. Check for binding steering components and repair as necessary.
Features and Benefits100% computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Features and BenefitsManufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Features and BenefitsPrecise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Features and BenefitsUnits are supplied with reservoir and cap (when applicable) to reduce installation time and prevent contamination from trapped debris.
Hose Port TypeO-Ring
Housing MaterialCast Iron
Mounting Hardware IncludedNo
Package ContentsPump, Reservoir, O-Ring Kit, Instruction Sheet
Power Steering Outlet Thread SizeM16 x 1.5
Power Steering Pump Inlet Attachement TypeReservoir
Power Steering Pump Outlet Attachment TypeO-Ring
Power Steering Pump Outlet Quantity1
Power Steering Reservoir Cap IncludedYes
Product ConditionNew
Pulley Attachement TypePress-On
Pulley IncludedNo
Remote ReservoirNo
Reservoir IncludedYes

DOWNLOADS:

INTERCHANGE:

  • General Motors: 26003926
  • General Motors: 26003927

APPLICATIONS:

  • 1987-1988 GMC R2500 Suburban
  • 1987-1987 GMC V1500
  • 1987-1988 Chevrolet R20
  • 1987-1988 GMC R1500 Suburban
  • 1987-1988 GMC V2500 Suburban
  • 1987-1989 GMC R2500
  • 1987-1987 Chevrolet V20
  • 1987-1988 Chevrolet V10 Suburban
  • 1987-1988 Chevrolet R20 Suburban
  • 1987-1987 GMC V2500
  • 1987-1988 Chevrolet R10 Suburban
  • 1987-1987 Chevrolet V10
  • 1987-1987 GMC R1500
  • 1987-1988 GMC Jimmy
  • 1989-1989 Chevrolet R2500
  • 1987-1988 GMC V1500 Suburban
  • 1987-1988 Chevrolet V20 Suburban
  • 1987-1987 Chevrolet R10
  • 1987-1988 Chevrolet Blazer

Attributes
Product type:
Aftermarket
Features and Benefits:
Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supp
Brand Description:
Power Steering Pump
Mounting Hardware Included:
No
Housing Material:
Cast Iron
Hazardous Material:
No
Minimum Order Quantity:
1
Reservoir Included:
Yes
Package Contents:
Hydraulic Pump; Instruction Sheet; Sealing Kit
Product Condition:
New
E-Waste:
No
Pulley Included:
No
Power Steering Outlet Thread Size:
16x1.5
Hose Port Type:
O-ring
Remote Reservoir:
No
FAQs:
Why is the pump making a whining noise all of the time?
FAQs:
Why do I still have hard steering in one direction after I replaced the pump?
FAQs:
There may be debris in the flow control valve bore not allowing the flow control valve to move as it should. (Valve and bore are located behind the high pressure fitting on the pump). The system must be checked for contamination and flushed.
FAQs:
The pulley may have cracked upon removal. If the shaft was mushroomed before removing the pulley, it has now enlarged the bore in the pulley. The pulley must be replaced.
FAQs:
The problem is most likely in the steering unit-the pump does not know left from right. Check for binding steering components and repair as necessary.
FAQs:
Should I ever change my fluid, even though nothing is wrong?
FAQs:
I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
Life Cycle Status:
Available to Order
FAQs:
I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Features and Benefits:
Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Item Level GTIN:
00082617712804
Features and Benefits:
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Quantity Per Application:
1
Features and Benefits:
Meets or exceeds O.E. performance.
Features and Benefits:
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Pulley Attachement Type:
Press-On
Power Steering Reservoir Cap Included:
Yes
Power Steering Pump Inlet Attachement Type:
Barb
Power Steering Pump Outlet Attachment Type:
Threaded
Power Steering Pump Outlet Quantity:
1
Short Description:
Pwr Steering Pump
Weight - Each (Gross Pounds):
9.4900
Height - Each (Inch):
6.5000
Length - Each (Inch):
10.7500
Width - Each (Inch):
7.1250



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top