×
close

Cardone 20-7922 | Power Steering Pump

(No reviews yet) Write a Review
$63.99
Part Number
CAD20-7922
UPC:
00082617024754
Condition:
New
5 customers are viewing this product
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

BRAND: Cardone Reman

FEATURES:

  • Chevrolet Blazer 1988-87, R10 1987, R10 Suburban 1988-87, R20 1988-87, R20 Suburban 1988-87, R2500 1989, V10 1987, V10 Suburban 1988-87, V20 1987, V20 Suburban 1988-87; GMC Jimmy 1988-87, R1500 1987, R1500 Suburban 1988-87, R2500 1989-87, R2500 Suburban 1
  • Power Steering Pump
  • Power Steering Pump, Steering Pump, Pump and Reservior
  • Reman. Power Steering Pump
  • Remanufactured Power Steering Pump

SPECIFICS:

E-WasteNo
FAQsThe end of the original pump's input shaft enlarged causing the pulley hole to increase during removal. The pulley must be replaced.
FAQsI bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
FAQsShould I ever change my fluid, even though nothing is wrong?
FAQsWhy do I still have hard steering in one direction after I replaced the pump?
FAQsI only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAQsA whining pump is usually caused by air in the power steering system. Inspect the reservoir for proper fluid level. If fluid has foam or air bubbles present, air has entered the system or has not been properly bled (ensure all hoses/clamps are tight). Some systems require special vacuum bleeding procedures.
FAQsMost likely cause is contamination. Remove the pressure hose and pressure fitting on the power steering pump. Remove the flow control valve and spring. Clean the valve and check the valve bore for damage. Reinstall the spring, valve, fitting and hose. Flush and bleed system and re-test. If okay, install power steering filter to prevent problem from re-occurring.
FAQsThe problem is most likely in the steering unit-the pump does not know left from right. Check for binding steering components and repair as necessary.
FAQsWhy is the pump making a whining noise all of the time?
FAQsYes. Some O.E. manufacturers recommend that power steering fluid be changed at 50,000 miles and continue at that interval. Just like engine oil, power steering fluid will eventually break down and carry suspended contaminants from component wear and breakdown. Follow your vehicle's O.E. manufacturer's recommendations on fluid change intervals.
Features and BenefitsUnits are supplied with 100% tested and calibrated pressure relief valves.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsFInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
Features and BenefitsAll units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Features and BenefitsShafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsAll critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
Hose Port TypeO-Ring
Housing MaterialCast Iron
Mounting Hardware IncludedNo
Package ContentsHydraulic Pump; Instruction Sheet; Sealing Kit
Power Steering Outlet ID Size0
Power Steering Outlet Thread Size16x1.5
Power Steering Pump Inlet Attachement TypeHose Barb
Power Steering Pump Outlet Attachment TypeThreaded
Power Steering Pump Outlet Quantity1
Power Steering Reservoir Cap IncludedNo
Product ConditionRemanufactured
Pulley Attachement TypePress-On
Pulley IncludedNo
Remote ReservoirNo
Reservoir IncludedYes

INTERCHANGE:

  • GMC: 26003927
  • Chevrolet: 26003927
  • Chevrolet: 26003926
  • GMC: 26003926

APPLICATIONS:

  • 1987-1988 Chevrolet V20 Suburban
  • 1987-1987 Chevrolet R10
  • 1987-1989 GMC R2500
  • 1987-1987 Chevrolet V20
  • 1987-1988 GMC R2500 Suburban
  • 1987-1987 GMC V1500
  • 1987-1988 GMC V1500 Suburban
  • 1987-1988 Chevrolet V10 Suburban
  • 1987-1988 Chevrolet Blazer
  • 1987-1988 Chevrolet R20 Suburban
  • 1987-1988 Chevrolet R10 Suburban
  • 1987-1987 GMC R1500
  • 1987-1988 GMC Jimmy
  • 1987-1988 Chevrolet R20
  • 1987-1988 GMC R1500 Suburban
  • 1987-1988 GMC V2500 Suburban
  • 1987-1987 GMC V2500
  • 1987-1987 Chevrolet V10
  • 1989-1989 Chevrolet R2500
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Features and Benefits:
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the o
Brand Description:
Power Steering Pump
Mounting Hardware Included:
No
Housing Material:
Cast Iron
Hazardous Material:
No
Minimum Order Quantity:
1
Reservoir Included:
No
Package Contents:
Hydraulic Pump; Instruction Sheet; Sealing Kit
Product Condition:
Remanufactured
E-Waste:
No
Pulley Included:
No
Power Steering Outlet Thread Size:
16x1.5
Hose Port Type:
O-Ring
Remote Reservoir:
No
FAQs:
Why is the pump making a whining noise all of the time?
FAQs:
Why do I still have hard steering in one direction after I replaced the pump?
FAQs:
The problem is most likely in the steering unit-the pump does not know left from right. Check for binding steering components and repair as necessary.
FAQs:
The end of the original pump's input shaft enlarged causing the pulley hole to increase during removal. The pulley must be replaced.
FAQs:
Should I ever change my fluid, even though nothing is wrong?
FAQs:
I only have assist when increasing engine rpm after installing the replacement pump. What's causing this?
FAQs:
I bought a replacement power steering pump and my original pulley has a loose fit on the replacement pump shaft. What should I do?
Life Cycle Status:
Available to Order
Features and Benefits:
All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Features and Benefits:
Units are supplied with 100% tested and calibrated pressure relief valves.
Item Level GTIN:
00082617024754
Features and Benefits:
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Quantity Per Application:
1
Features and Benefits:
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and Benefits:
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Pulley Attachement Type:
Press-On
Power Steering Reservoir Cap Included:
No
Power Steering Pump Inlet Attachement Type:
Barb
Power Steering Pump Outlet Attachment Type:
Threaded
Power Steering Pump Outlet Quantity:
1
Short Description:
Pwr Steering Pump
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
9.4900
Height - Each (Inch):
6.5000
Length - Each (Inch):
10.7500
Width - Each (Inch):
7.1250



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top