ACDelco 530-4 | Chevrolet Corvette Rear Shock Absorber

ACDelco 530-4 | Chevrolet Corvette Rear Shock Absorber

ACDelco

(No reviews yet)

$40.79

Part Number

ACD530-4

UPC:

00021625317311

Condition:

New

5 customers are viewing this product

Description
Attributes
Warranty Information
Shipping & Returns
custom prodcut tab
FAQ

Description

ACDelco Professional Premium Gas Charged Shocks are twin-tube passive replacement shocks for passenger cars, vans, SUVs, and light trucks. These shocks have a high pressure nitrogen gas charge along with chrome finished piston rods and drawn over mandrel (DOM) pressure cylinders. For additional ride support, ACDelco Professional Premium Gas Charged Shocks utilize premium Road Response Valving Technology that automatically adjusts to provide comfort and extra control by responding to changing road conditions during normal driving situations, and improved handling under extreme road conditions.

BRAND: ACDelco

FEATURES:

A hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping increase seal life
Drawn over mandrel (DOM) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life
Full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod
Gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks
Infinitely variable damping for on-demand control on all road conditions
O-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control
Valve design performance that is independent of ride height reduces the potentially negative effects of vehicle loads or weak spring conditions

SPECIFICS:

ACD_RemanDes	No
AltPA_107_mm	244.348
AltPA_108_mm	129.79
AltPA_3042_mm	374.142
AltPA_38_mm	129.79
AltPA_52_mm	41.4
Comparison Chart 1	PL05_PL09_CC_MaintShockStrut.jpg
Comparison Chart 2	PL09_CC_ChromedRodVsUncoatedRod.jpg
FAQ - A1	Yes, though shocks and struts perform a similar function, they vary greatly in their design. Struts are an integral part of a vehicle's suspension system, providing structural support for the vehicle and, as such, are a safety subsystem. Shocks work separately from any structural function, simply absorbing and damping the bumps from the road.
FAQ - A2	Yes, all shocks and struts use hydraulic fluid (oil) to control damping. A gas charged shock or strut uses high-pressure nitrogen gas to reduce oil foaming during high-speed damping, and therefore maintains performance.
FAQ - A3	Yes, it is possible to do a quick check at home for wear on your vehicle's shocks or struts. You can look for any physical damage to the shock or strut housing or any leaking - this is especially common on rear units that tend to have stones kicked up by the front wheels. You can also perform a bounce test by taking each corner of the vehicle and pushing down hard. The corner should drop, rise and settle again. If the body continues to move up and down, there's a good chance your shocks need to be replaced. Though these home tests can indicate worn shocks or struts, it is also recommended that you take your vehicle to a qualified service technician and let them do a thorough inspection every 12 months or 12,000 miles.
FAQ - A4	Yes, if you are replacing your vehicle's struts. However, it is not necessary to get your vehicle aligned when replacing your vehicle's shocks unless there was or is a previous issue.
FAQ - A5	Yes, it is important to choose the correct shock or strut for your vehicle model and year, as well as for the location in the vehicle.
FAQ - Q1	Is there a difference between a shock and a strut?
FAQ - Q2	Do gas charged shocks or struts contain oil?
FAQ - Q3	Can I check my vehicle's shocks for wear?
FAQ - Q4	Should I have my vehicle aligned after replacing my shocks or struts?
FAQ - Q5	Do I need different shocks for front, rear, left, or right applications?
Good Maintenance Practices - S1 B1	Brakes
Good Maintenance Practices - S1 B2	Tie rods
Good Maintenance Practices - S1 B3	Ball joints
Good Maintenance Practices - S1 B4	Tires
Good Maintenance Practices - S1 H	Your vehicle's shocks and struts slowly deteriorate over time, though this wear is normally difficult to detect. To maximize your vehicle's ride comfort and safety, it is recommended to replace your vehicle's shocks and struts every 50,000 miles. Worn shocks and struts can also cause additional wear to other vehicle components. Affected components include:
Good Maintenance Practices - S2 B1	Leaking oil or wetness along the body of the shock or strut.
Good Maintenance Practices - S2 B2	Broken mounts, worn or missing bushings.
Good Maintenance Practices - S2 B3	Broken, damaged, or missing mounting hardware.
Good Maintenance Practices - S2 B4	Severely dented reservoir tube, bent or scratched piston rod.
Good Maintenance Practices - S2 B5	Cupped tire wear.
Good Maintenance Practices - S2 B6	Damaged strut body springs, seats, and bushings.
Good Maintenance Practices - S2 B7	Defective strut bearing or missing plate.
Good Maintenance Practices - S2 H	To inspect your shocks and struts to gauge wear, check for:
Keyword Search	ACDelco; Automotive; Auto Parts; Professional; Suspension; Premium Gas Charged; Shock; Shocks and Struts; Shock Absorber; Shock Absorber Kit; Shocks, Struts, and Suspension; ABSORBER,FRT SHK; ABSORBER,RR LVLG SHK; ABSORBER,RR LVLG SHK; ABSORBER,RR SHK; ABSORBER,RR SHK; ABSORBER,RR SHK (W/ SHLD); ABSORBER,RR SHK(W/UPR MT); ABSORBER KIT,FRT SHK; ABSORBER KIT,RR LVLG SHK; ABSORBER KIT,RR SHK
Marketing Statement - Product Line	ACDelco provides superior comfort, control, and durability through our Professional, Advantage, and Specialty Suspension lines. We offer a wide variety of parts, such as, suspension components, steering dampers, and lift supports. Preserving your vehicle's safety and driving comfort means also maintaining your vehicle's suspension. ACDelco Suspension Components, like shocks and struts, provide outstanding ride, comfort, and handling for your passenger car, light truck, or SUV. Keep your steering smooth and vibration-free with ACDelco Steering Dampers and use ACDelco Lift Supports to retain your vehicle's accessibility and convenience. To maintain vehicle safety and comfort, as well as convenience and performance, look no further than ACDelco Suspension Components.
Marketing Statement - Sub Brand	When it comes to replacing your shocks, struts, and other suspension components, ACDelco offers a full line of Professional premium aftermarket suspension products. In addition to shocks and struts, we offer a variety of parts to make part replacement simple and precise. ACDelco Professional Suspension parts fit your GM vehicle, as well as a wide range of other vehicles on the road today.
Mkt_BrandQual_Name	Premium Gas Charged
Mkt_State_Warranty_CA	24 Months/40,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US	Limited Lifetime Warranty (Parts Only). Please see ACDelco.com for more details.
Signs of Wear & Troubleshooting - S1 B1	There is directional and steering wheel position instability
Signs of Wear & Troubleshooting - S1 B2	Your brakes pull
Signs of Wear & Troubleshooting - S1 B3	You notice worn or loose suspension or steering components
Signs of Wear & Troubleshooting - S1 B4	There is excessive nose dive while braking
Signs of Wear & Troubleshooting - S1 B5	Your vehicle has 'acceleration squat'
Signs of Wear & Troubleshooting - S1 B6	Your vehicle does not return to a neutral position
Signs of Wear & Troubleshooting - S1 B7	Your steering pulls
Signs of Wear & Troubleshooting - S1 B8	There is a strut mount or bearing noise
Signs of Wear & Troubleshooting - S1 H	It could be time to replace your shocks or struts if, when driving on a flat smooth surface:
Signs of Wear & Troubleshooting - S2 B1	Your ride is harsh, bumpy or shaky
Signs of Wear & Troubleshooting - S2 B2	Your vehicle bounces excessively
Signs of Wear & Troubleshooting - S2 B3	Your vehicle veers in side winds
Signs of Wear & Troubleshooting - S2 B4	Your vehicle leans or sways while turning
Signs of Wear & Troubleshooting - S2 B5	Your vehicle bounces excessively after hitting a bump
Signs of Wear & Troubleshooting - S2 B6	Your vehicle bottoms out
Signs of Wear & Troubleshooting - S2 H	It could be time to replace your shocks or struts if, when driving on a surface with bumps and/or dips:
Signs of Wear & Troubleshooting - S3 B1	If your vehicle's height seems lower than normal when measured
Signs of Wear & Troubleshooting - S3 B2	If you notice fluid leakage from your vehicle's shocks or struts
Signs of Wear & Troubleshooting - S3 B3	If your vehicle's shocks or struts have dented or heavily scratched housings or mounts
Signs of Wear & Troubleshooting - S3 H	Uneven patches of wear on the edges of your tire can be a sign of weak ride control (shocks or struts). This wear, called cupping, appears as scalloped dips around the surface of the tread. Other signs it could be time to replace your shocks or struts include:
Vintage_Part_Indicator	N

DOWNLOADS:

APPLICATIONS:

1963-1982 Chevrolet Corvette - Position: Rear

Warranty Information

1-year Replacement unlimited-mileage warranty

Shipping & Returns

Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.

Returns Policy

You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).

You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).

If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.

Shipping

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.

When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.

Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.

Attributes

Part Type:

Aftermarket

Product Description:

Premium Gas Charged Rear Shock Absorber

Mounting Hardware Included:

Programming Required:

Adjustable:

Body Diameter (Inch):

1.63

Shock Absorber Rod End Measuring Point:

Center Eye

Lower Mount Type:

Eyelet

Upper Mount Type:

Eyelet

Coil Over Springs Included:

Travel Length (Inch):

5.11

Compressed Length (Inch):

9.62

Gas Charged:

Yes

Boot Included:

Yes

Dust Shield:

Yes

Shock Absorber Body End Measuring Point:

Center Eye

Hazardous Material:

Minimum Order Quantity:

Features &amp; Benefits - Bullet 2:

Drawn over mandrel (DOM) pressure cylinder for high quality sealing properties and reduced internal friction to assist with longer product life

Features &amp; Benefits - Bullet 4:

Full perimeter, multi-lip, piston rod seal is permanently lubricated and helps keep dirt and contaminates from reaching the interior of the rod

Features &amp; Benefits - Bullet 3:

Gas charged for reduced fluid aeration, which can result in better response, less foaming, and more consistent control than non-gas charged shocks

Life Cycle Status:

Announced

Features &amp; Benefits - Bullet 1:

A hardened, chromed piston rod with micro cracks provides an ultra-smooth, self-lubricating, corrosion- and scratch-resistant surface, helping increase seal life

Life Cycle Status Description:

Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.

Weight (lb) (Pound):

2.97

Item Level GTIN:

00021625317311

Height (in) (Inch):

2.6

Width (in) (Inch):

Length (in) (Inch):

19.3

Signs of Wear &amp; Troubleshooting - Section 1 - Bull:

Your vehicle does not return to a neutral position

Signs of Wear &amp; Troubleshooting - Section 1 - Bull:

Your vehicle has 'acceleration squat'

Signs of Wear &amp; Troubleshooting - Section 1 - Bull:

There is excessive nose dive while braking

Signs of Wear &amp; Troubleshooting - Section 1 - Bull:

There is a strut mount or bearing noise

Signs of Wear &amp; Troubleshooting - Section 1 - Bull:

Your steering pulls

FAQ - Question 4:

Should I have my vehicle aligned after replacing my shocks or struts?

FAQ - Answer 2:

Yes, all shocks and struts use hydraulic fluid (oil) to control damping. A gas charged shock or strut uses high-pressure nitrogen gas to reduce oil foaming during high-speed damping, and therefore maintains performance.

FAQ - Question 3:

Can I check my vehicle's shocks for wear?

FAQ - Question 1:

Is there a difference between a shock and a strut?

Features &amp; Benefits - Bullet 7:

Valve design performance that is independent of ride height reduces the potentially negative effects of vehicle loads or weak spring conditions

FAQ - Answer 5:

Yes, it is important to choose the correct shock or strut for your vehicle model and year, as well as for the location in the vehicle.

Features &amp; Benefits - Bullet 6:

Infinitely variable damping for on-demand control on all road conditions

FAQ - Question 2:

Do gas charged shocks or struts contain oil?

Features &amp; Benefits - Bullet 5:

O-ring hydraulic piston seal resulting in minimized piston blow-by and consistent control

FAQ - Question 5:

Do I need different shocks for front, rear, left, or right applications?

FAQ - Answer 4:

Yes, if you are replacing your vehicle's struts. However, it is not necessary to get your vehicle aligned when replacing your vehicle's shocks unless there was or is a previous issue.

Good Maintenance Practices - Section 1 - Bullet 1:

Brakes

Good Maintenance Practices - Section 1 - Bullet 2:

Tie rods

Good Maintenance Practices - Section 1 - Bullet 3:

Ball joints

Good Maintenance Practices - Section 1 - Bullet 4:

Tires

Good Maintenance Practices - Section 2 - Bullet 1:

Leaking oil or wetness along the body of the shock or strut.

Good Maintenance Practices - Section 2 - Bullet 2:

Broken mounts, worn or missing bushings.

Good Maintenance Practices - Section 2 - Bullet 3:

Broken, damaged, or missing mounting hardware.

Good Maintenance Practices - Section 2 - Bullet 4:

Severely dented reservoir tube, bent or scratched piston rod.

Good Maintenance Practices - Section 2 - Bullet 5:

Cupped tire wear.