ACDelco
ACDelco 15033711 | Rear ABS Wheel Speed Sensor
ABS Wheel Speed Sensor Rear ACDelco GM Original Equipment 15033711
Connector Color | Black |
Connector Gender | Male |
Connector Shape | Oval |
Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems. |
Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
Height (in) | 3.25 |
Length (in) | 10.75 |
Length (mm) | 1651.1 |
Meets or Exceeds Original Equipment Manufacture Specifications | Yes |
Mounting Hardware Included | Yes |
Programming Required | No |
Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | ABS warning light is on, indicating the ABS has been deactivated due to a fault within the system. |
Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Brake fluid leakage. |
Signs of Wear & Troubleshooting - Section 1 - Header | ABS signs of wear include: |
Signs of Wear & Troubleshooting - Section 2 - Bullet 1 | Chirping or grinding noises when braking. |
Signs of Wear & Troubleshooting - Section 2 - Bullet 2 | Difficulty stopping the vehicle. |
Signs of Wear & Troubleshooting - Section 2 - Bullet 3 | A low or sinking brake pedal. |
Signs of Wear & Troubleshooting - Section 2 - Bullet 4 | Brake pedal pulsation (not to be confused with normal ABS operation). |
Signs of Wear & Troubleshooting - Section 2 - Bullet 5 | Vehicle pulls to the left or right when brakes are applied. |
Signs of Wear & Troubleshooting - Section 2 - Header | General brake signs of wear include: |
Terminal Gender | Female |
Terminal Quantity | 2 |
Terminal Type | Pin |
Weight (lb) | 0.38 |
Width (in) | 7.25 |