Autopart International
Autopart International 1420-604159 | Ford E-450 Super Duty Rear Disc Brake Pad Set
BRAND: Autopart InternationalDOWNLOADS: Autopart International General Warranty (109.62 kB) APPLICATIONS:2021-2021 Ford E-4
FAQ - Answer 1 | No, but it is a good idea to inspect them for wear-out, cracking, leaking etc. |
FAQ - Answer 2 | Yes, ACDelco also offers GM OE brake pads and Advantage brake pads. |
FAQ - Answer 3 | No, but it is a good idea to inspect your brake pads at each tire rotation. |
FAQ - Answer 4 | Yes, ACDelco Professional Disc Brake Pads come with a limited lifetime warranty. |
FAQ - Question 1 | Do I have to replace all my brake parts when replacing my brake pads? |
FAQ - Question 2 | Does ACDelco offer other grades of brake pads? |
FAQ - Question 3 | Do I have to replace my brake pads after a certain amount of time? |
FAQ - Question 4 | Are these brake parts durable? |
FMSI Number | 8442 |
Friction Material Attachment | Bonded |
Friction Material Composition | Semi-metallic |
Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
Good Maintenance Practices - Section 1 - Bullet 4 | Check the thickness of your brake pads. |
Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
Grade Type | Performance |
Height (in) | 4 |
Length (in) | 11.5 |
Mounting Hardware Included | Yes |
Pad Shims Included | Yes |
Pad Wear Sensor Included | No |
Programming Required | No |
Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Brake pedal pulsation (not to be confused with normal ABS operation). |
Signs of Wear & Troubleshooting - Section 1 - Bullet 5 | Vehicle pulls to the left or right when brakes are applied. |
Weight (lb) | 7.4 |
Width (in) | 6.3 |