×
close
click to zoom in

Gates 19200 | HVAC Heater Hose

(No reviews yet) Write a Review
$32.99
Part Number
GAT19200
UPC:
72053559385
Condition:
New
5 customers are viewing this product

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

  • Similar to OEM specifications.
  • Has all the quality features of Gates Molded Coolant Hose.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Inside diameters range from 1/4” to 1”.
  • Meets SAE 20R3 type EC Class D-1 and D-2 specifications.

Temperature rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility


BRAND: Gates

FEATURES:

  • 2003-1999 Ford, Super Duty Pickup, V-8 7.3 L Diesel, Heater To Eng.
  • Premium Molded Heater Hose
  • Molded Heater Hose
  • Premium Molded Heater Hose

SPECIFICS:

Branch Quantity0
Centerline Length (in)44.7
Centerline Length (mm)1135
End 1 Inside Diameter.63
End 1 Inside Diameter16
End 2 Inside Diameter.63
End 2 Inside Diameter16
MaterialEPDM
MoldedYes
Number of Quick Connect Fittings0
W/O Aux. Heater

DOWNLOADS:

INTERCHANGE:

  • Ford: F81H 18K579 MA
  • Ford: F81Z 18472 MA
  • Goodyear: 64385
  • NAPA Belts/Hose: 11200
  • ACDelco: 18191L
  • Dayco: E87790
  • Dayco: 87790
  • Motorcraft: KH260
  • Dayco: E87889
  • Ford: F81Z 18472 MAA
  • Dayco: 87889
  • Carquest: 19200

APPLICATIONS:

  • 1999-2003 Ford F-350 Super Duty - Position: Heater To Engine
  • 1999-2003 Ford F-250 Super Duty - Position: Heater To Engine
  • 1999-2003 Ford F-550 Super Duty - Position: Heater - Right Side
  • 2000-2003 Ford F-450 Super Duty - Position: Heater To Engine
  • 2000-2001 Ford Excursion - Position: Heater To Engine
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Features and Benefits:
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
Features and Benefits:
Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Features and Benefits:
Engineered to resist electrochemical degradation – the leading cause of hose failure
Features and Benefits:
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Features and Benefits:
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Features and Benefits:
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Brand Description:
Premium Molded Heater Hose
Centerline Length (Inch):
44.7
Centerline Length (Millimeter):
1135
Branch Quantity:
0
End 1 Inside Diameter (Inch):
.63
End 1 Inside Diameter (Millimeter):
16
End 2 Inside Diameter (Inch):
.63
End 2 Inside Diameter (Millimeter):
16
Molded:
Yes
Short Description:
Heater Hose
Quick Connect Fitting Quantity:
0
Material:
EPDM
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.8700
Weight - Case (Gross Pounds):
11.5830
Height - Each (Inch):
1.2600
Height - Case (Inch):
13.0000
Length - Each (Inch):
22.1250
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Length - Case (Inch):
22.0000
Item Level GTIN:
00072053559385
Width - Each (Inch):
18.1250
Quantity Per Application:
1
Width - Case (Inch):
18.0000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top