×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
Gates 20685 | Radiator Coolant Hose
click to zoom in

Gates 20685 | Radiator Coolant Hose

(No reviews yet) Write a Review
$21.99
Part Number
GAT20685
UPC:
72053052398
Condition:
New
5 customers are viewing this product

video gallery

Description

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

  • Recommend for upper, lower, by-pass, heater and other coolant hose applications.
  • Heat and ozone resistant cover.
  • Engineered to resist electrochemical degradation - the leading cause of hose failure.
  • Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
  • Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.

Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.

Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.

Gates - Driven By Possibility


BRAND: Gates

FEATURES:

  • Premium Molded Coolant Hose
  • Premium Molded Coolant Hose
  • 2001-1994 AM General, Hummer, V-8 6.5 L Diesel, Lower - Pipe To Rad.
  • Molded Coolant Hose

SPECIFICS:

Branch Quantity0
Centerline Length9.2
Centerline Length234
Contains SpringYes
End 1 Inside Diameter51
End 1 Inside Diameter2
End 2 Inside Diameter51
End 2 Inside Diameter2
MaterialEPDM
Modular HoseNo
MoldedYes
Number of Quick Connect Fittings0
Cut to fit

DOWNLOADS:

INTERCHANGE:

  • Ford: C4TA 8286 C
  • Motorcraft: KM-211
  • White: TG8776
  • Clark Equipment: 564006
  • Massey Ferguson: 202641M2
  • General Motors: 2490798
  • General Motors: 3778410
  • : 540244
  • Goodyear: 62434
  • : 71943
  • Carquest: 20685
  • Case Tractor: D120185
  • Ford: B8T 8286 C
  • AM General: 12339159
  • Ultralast: C0685
  • Goodyear: 66714
  • Raygo: 1205964
  • General Motors: 3880343
  • Ford: C4TA 8A127 A
  • Ford: C4TZ 8286 C
  • Ford: D2PZ 8286 E
  • Perkins: 34825122
  • Hyster: 393164
  • General Motors: 2364787
  • General Motors: 3833781
  • Clark Equipment: 515898
  • General Motors: 2333249
  • Massey Ferguson: 735604M1
  • Ford: TFCB 8286 A
  • Ford: C4TA 8A319 D
  • NAPA Belts/Hose: 7458
  • International Harvester (IHC): 870528C1
  • Allis Chalmers: 236250
  • ACDelco: 20048S
  • Hummer: 12339159
  • Ford: C9PZ 8286 F
  • General Motors: 3778420
  • U.S. Government: 12339159
  • Dayco: 71810
  • Ford: C9PJ 8286 F
  • General Motors: 3923884
  • Massey Ferguson: 515182M2
  • Motorcraft: KM-607

APPLICATIONS:

  • 1968-1969 GMC P35/P3500 Van - Position: Lower - Pipe To Radiator
  • 1968-1970 Chevrolet P30 Van - Position: Lower - Pipe To Radiator
  • 2002-2004 Hummer H1 - Position: Lower - Pipe To Radiator
  • 2006-2006 Hummer H1 - Position: Lower - Pipe To Water Pump
  • 1994-2001 AM General Hummer - Position: Lower - Pipe To Radiator
  • 1992-1993 AM General Hummer - Position: Lower - Pipe To Water Pump
  • 1968-1969 GMC P25/P2500 Van - Position: Lower - Pipe To Radiator
Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Part Type:
Aftermarket
Features and Benefits:
Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates&apo
Features and Benefits:
Specifically-engineered materials resist collapse under vacuum
Features and Benefits:
Engineered to resist electrochemical degradation, the leading cause of hose failure
Features and Benefits:
Pre-shaped to fit and to ensure perfectly sealed conditions
Features and Benefits:
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Features and Benefits:
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Features and Benefits:
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Features and Benefits:
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Features and Benefits:
Caution: Do not use for fuel or oil transfer applications
Brand Description:
Premium Molded Coolant Hose
Centerline Length (Inch):
9.2
Centerline Length (Millimeter):
234
Branch Quantity:
0
End 1 Inside Diameter (Inch):
2
End 1 Inside Diameter (Millimeter):
51
End 2 Inside Diameter (Inch):
2
End 2 Inside Diameter (Millimeter):
51
Molded:
Yes
Short Description:
Coolant Hose
Female Nut End Thread Size (in):
No
Quick Connect Fitting Quantity:
0
Material:
EPDM
Contains Spring:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Weight - Each (Gross Pounds):
0.7900
Weight - Case (Gross Pounds):
21.0170
Height - Each (Inch):
4.0000
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Height - Case (Inch):
9.8750
Item Level GTIN:
00072053052398
Length - Each (Inch):
7.3600
Quantity Per Application:
2
Length - Case (Inch):
22.0000
Width - Each (Inch):
2.7600
Width - Case (Inch):
12.0000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top