×
close

ACDelco 45d0135 | Jeep Grand Cherokee Suspension Ball Joint

(No reviews yet) Write a Review
$46.74
Part Number
ACD45D0135
UPC:
00707773718759
Condition:
New
5 customers are viewing this product
An ACDelco Professional Ball Joint is a high quality replacement for many vehicles on the road today. It connects your vehicle's control arm to its steering knuckle. This ball joint features a polyurethane dust boot, a one-piece housing, and advanced bearings. It also has coated, heat-treated studs and includes all hardware. This premium aftermarket replacement component is manufactured to meet your expectations for fit, form, and function. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • CNC-machined housing for consistency and high-quality
  • Corrosion-resistant coating
  • Designed to perform to the application
  • Greaseable where applicable: Allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
  • Induction hardened to match OE fatigue life
  • Jeep
  • Manufactured at TS 16949-certified facilities to help with consistent high-quality
  • Undergoes extreme impact, wear and fatigue testing to help with quality and durability

SPECIFICS:

AdjustableNo
Ball Joint AssemblyYes
Castle Nut IncludedYes
Cotter Pin HoleNo
Dust Boot IncludedYes
FAQ - Answer 1Yes. Replacing ball joints is not part of routine maintenance. However, they should be checked according to the manufacturer scheduled maintenance or mileage intervals, or at every oil and filter service. Most ball joints on later vehicles are sealed and do not require any grease. There are still some ball joints that should be greased every time the oil and filter is changed. Check your vehicle application for the correct service required.
FAQ - Answer 2Yes. It may change the alignment angles. Have the alignment checked after replacing any steering components.
FAQ - Question 1Does a ball joint require regular maintenance?
FAQ - Question 2Will replacing this part effect the vehicle alignment?
Good Maintenance Practices - Section 1 - Bullet 1Inspect or have your ball joints inspected for signs of wear. Over time, lubrication inside the ball joint can dry out, leading to joint wear. Even sealed ball joints can be exposed to air, and if the ball joint's protective boot is damaged, dirt and debris could further harm the life and function of the joint. Exposure to harsh driving conditions like pot holes, bumpy road surfaces, or road salt may also cause ball joints to fail, and worn ball joints could result loss of vehicle control or tire damage. Inspect your ball joints regularly, following exposure to events that may harm the component, or when you experience signs of ball joint wear.
Good Maintenance Practices - Section 1 - Bullet 2Use new installation components. If you replace your vehicle's ball joints, make sure to use new mounting hardware, rather than reusing the old.
Good Maintenance Practices - Section 1 - Bullet 3Avoid replacing only one ball joint at a time. If you choose to replace a ball joint, you should consider replacing ball joints as a set to make front end alignment easier.
Good Maintenance Practices - Section 1 - Bullet 4Installing a new ball joint can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any ball joint replacement.
GreasableNo
MaterialSteel
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Mounting Hole Quantity3
Mounting TypeBolt On
Programming RequiredNo
Stud TypeThreaded
Suspension Grade TypePremium
TypeBolt On

DOWNLOADS:

APPLICATIONS:

  • 1999-2004 Jeep Grand Cherokee - Position: Rear Upper
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Product Description:
Rear Upper Suspension Ball Joint Assembly
Material:
Steel
Programming Required:
No
Mounting Type:
Bolt On
Type:
Bolt On
Mounting Hole Quantity:
3
Adjustable:
No
Cotter Pin Hole:
No
Suspension Grade Type:
Premium
Greasable:
No
Dust Boot Included:
Yes
Castle Nut Included:
Yes
Ball Joint Assembly:
Yes
Stud Type:
Threaded
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Undergoes extreme impact, wear and fatigue testing to help with quality and durability
Features & Benefits - Bullet 4:
Designed to perform to the application
Features & Benefits - Bullet 3:
Induction hardened to match OE fatigue life
Features & Benefits - Bullet 1:
CNC-machined housing for consistency and high-quality
Life Cycle Status:
Announced
FAQ - Answer 2:
Yes. It may change the alignment angles. Have the alignment checked after replacing any steering components.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Question 1:
Does a ball joint require regular maintenance?
Item Level GTIN:
00707773718759
Features & Benefits - Bullet 7:
Manufactured at TS 16949-certified facilities to help with consistent high-quality
Features & Benefits - Bullet 6:
Corrosion-resistant coating
FAQ - Question 2:
Will replacing this part effect the vehicle alignment?
Features & Benefits - Bullet 5:
Greaseable where applicable: Allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear
Good Maintenance Practices - Section 1 - Bullet 2:
Use new installation components. If you replace your vehicle's ball joints, make sure to use new mounting hardware, rather than reusing the old.
Good Maintenance Practices - Section 1 - Bullet 3:
Avoid replacing only one ball joint at a time. If you choose to replace a ball joint, you should consider replacing ball joints as a set to make front end alignment easier.
Good Maintenance Practices - Section 1 - Bullet 4:
Installing a new ball joint can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any ball joint replacement.
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Country of Origin:
Taiwan
Weight - Each (Gross Pounds):
02.25
Weight - Case (Gross Pounds):
27.00
Height - Each (Inch):
04.20
Height - Case (Inch):
11.10
Length - Each (Inch):
05.20
Length - Case (Inch):
12.00
Width - Each (Inch):
05.20
Width - Case (Inch):
11.80



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top