×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 46A0820A | Jeep Grand Cherokee Steering Tie Rod End
click to zoom in

ACDelco 46A0820A | Jeep Grand Cherokee Steering Tie Rod End

(No reviews yet) Write a Review
$34.84
Part Number
ACD46A0820A
UPC:
00707773918760
Condition:
New
5 customers are viewing this product

video gallery

Description
Driver Side Outer Steering Tie Rod End

BRAND: ACDelco

FEATURES:

  • alignment camber kit;alignment caster kit;ball joint bearing;ball joint bolt;ball joint;bushing;center link;center link steering;control arm;control arm bushing;drag link;idler arm;idler arm bracket;idler arm puller;pitman arm;pitman arm puller;suspension control arms;sway bar;tie rod;tie rod ball joint;tie rod end

SPECIFICS:

ACD_RemanDesNo
AltPA_14_mm245.618
AltPA_2346_mm24.00
Castle Nut IncludedYES
ColorBlack
End 1 GenderMale
End 2 GenderMale
FAQ - A1Yes. ACDelco Advantage Chassis parts are for both GM and non-GM vehicle applications.
FAQ - A2Yes. Installing new tie rod ends or tie rod end adjusting sleeves can interfere with the alignment of your vehicle, so a full four-wheel vehicle alignment is recommended following any tie rod and tie rod component replacement.
FAQ - Q1Can I use ACDelco Advantage Chassis parts on my non-GM vehicle?
FAQ - Q2Should I perform a vehicle alignment after installing new tie rod ends or tie rod end adjusting sleeves?
Features & Benefits - B1Superb strength for durability
Features & Benefits - B10Manufactured at ISO 9001-certified facilities to ensure consistent high quality
Features & Benefits - B2Consistent torque for smooth operation
Features & Benefits - B3Full ball stud
Features & Benefits - B4Low-friction double bearing for high impact resistance
Features & Benefits - B5Undergo extreme impact, wear, and fatigue testing to ensure quality and durability
Features & Benefits - B6Dust boot is installed and attached to reduce contamination, increase durability, and extend service life
Features & Benefits - B7Polyurethane dust boot resists cracking, splitting, dry rot, and corrosion
Features & Benefits - B8Greaseable design for long life
Features & Benefits - B9Coated for corrosion resistance
FinishPlain
Good Maintenance Practices - S1 B1Inspect or have your tie rod components inspected for signs of wear. Potholes, bumpy road conditions, and minor accidents can all result in tie rod wear, and in extreme instances, bending or breakage. Inspect your tie rod components regularly, following exposure to events that may harm them, or when you experience signs of tie rod component wear.
Good Maintenance Practices - S1 B2Keep your tie rod ends lubricated. Road hazards like rough terrain or hitting curbs can damage tie rods and cause lubrication to leak out. Once lubrication is lost, the tie rod may loosen and bind up, preventing proper function. Check or have your tie rod ends checked and lubricated if necessary.
Good Maintenance Practices - S1 B3Use a sleeve rotating tool to rotate your tie rod end adjusting sleeve and apply penetrating oil to the clamps and sleeve before loosening it. Proper sleeve rotation is key to helping prevent damage and a loose fit between the sleeve and tie rod end.
Good Maintenance Practices - S1 B4Installation of new tie rod components can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any tie rod replacement.
Grease Fitting IncludedNO
Height2.9
Keyword SearchACDelco; Automotive Replacement Parts; ACDelco Chassis Parts; Chassis Replacement Parts; Chassis; Steering Replacement Parts; Steering Parts; Advantage Steering Tie Rod End; Steering Tie Rod End; Tie Rod End
Length13.7
Marketing Statement - Product LineACDelco Advantage Chassis products provide high-quality parts at a tremendous value. Engineered to the fit, form, and function of a premium aftermarket line, ACDelco Advantage Chassis include tie rod ends, ball joints, control arms, steering and suspension links, steering arms, and bushings - all at an economical price. With ACDelco Advantage parts, installation hardware is included where needed.
MaterialSteel
Mkt_State_Warranty_US12 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Product DescriptionACDelco Advantage Steering Tie Rod Ends are economical replacement components for your GM and non-GM vehicle. They connect your vehicle's steering linkage to the steering knuckle. These dependable aftermarket steering tie rod ends offer quality and performance, all at an economical price. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Programming RequiredNO
Signs of Wear & Troubleshooting - S1 B1Unexpected noises: clunking noises while turning your vehicle's steering wheel may indicate tie rod end and sleeve wear. A knocking sound from the front end of the vehicle during low speed steering often indicates a problem with the outer tie rod end.
Signs of Wear & Troubleshooting - S1 B2Vehicle wandering: if your vehicle pulls to the side while driving at speed, braking, or going over bumps, tie rod end and sleeve wear may be the cause.
Signs of Wear & Troubleshooting - S1 B3Tire wear: excessive tire wear may indicate tie rod end and sleeve wear.
Signs of Wear & Troubleshooting - S1 B4Sagging tires: bad tie rods cannot properly support the wheels of your vehicle, resulting in sagging tires as a common sign of tie rod problems.
Signs of Wear & Troubleshooting - S1 B5Vibration while driving: loose tie rod connections will allow your tire to wobble on its axis. This wobble may be felt as a vibration or shaking in the steering wheel and front axle while driving your vehicle.
Signs of Wear & Troubleshooting - S1 B6Excessive play in steering linkage: excessive movement or play in your vehicle's steering linkage may indicate tie rod end and sleeve wear.
Signs of Wear & Troubleshooting - S1 B7Alignment issues: an inability to set the proper alignment for your vehicle may be a sign of tie rod end and sleeve wear.
Tie Rod End Thread Diameter0.945
TypeOuter
Vintage_Part_IndicatorN
Weight2.5
Width3.9

DOWNLOADS:

APPLICATIONS:

  • 1999-2004 Jeep Grand Cherokee - Position: Left Outer
Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Part Type:
Aftermarket
Product Description:
Driver Side Outer Steering Tie Rod End
Material:
Steel
Programming Required:
No
Color:
Black
Finish:
Plain
Weight (Pound):
2.5
Type:
Outer
Grease Fitting Included:
No
End 1 Gender:
Male
End 2 Gender:
Male
Castle Nut Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Consistent torque for smooth operation
Features & Benefits - Bullet 4:
Low-friction double bearing for high impact resistance
Features & Benefits - Bullet 3:
Full ball stud
Features & Benefits - Bullet 1:
Superb strength for durability
Height (in) (Inch):
2.9
Width (in) (Inch):
3.9
Length (in) (Inch):
13.7
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vibration while driving: loose tie rod connections will allow your tire to wobble on its axis. This wobble may be felt as a vibration or shaking in the steering wheel and front axle while driving your vehicle.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle wandering: if your vehicle pulls to the side while driving at speed, braking, or going over bumps, tie rod end and sleeve wear may be the cause.
Item Level GTIN:
00707773918760
Signs of Wear & Troubleshooting - Section 1 - Bull:
Tire wear: excessive tire wear may indicate tie rod end and sleeve wear.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Sagging tires: bad tie rods cannot properly support the wheels of your vehicle, resulting in sagging tires as a common sign of tie rod problems.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Excessive play in steering linkage: excessive movement or play in your vehicle's steering linkage may indicate tie rod end and sleeve wear.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Alignment issues: an inability to set the proper alignment for your vehicle may be a sign of tie rod end and sleeve wear.
FAQ - Answer 2:
Yes. Installing new tie rod ends or tie rod end adjusting sleeves can interfere with the alignment of your vehicle, so a full four-wheel vehicle alignment is recommended following any tie rod and tie rod component replacement.
FAQ - Question 1:
Can I use ACDelco Advantage Chassis parts on my non-GM vehicle?
Features & Benefits - Bullet 7:
Polyurethane dust boot resists cracking, splitting, dry rot, and corrosion
Features & Benefits - Bullet 6:
Dust boot is installed and attached to reduce contamination, increase durability, and extend service life
FAQ - Question 2:
Should I perform a vehicle alignment after installing new tie rod ends or tie rod end adjusting sleeves?
Features & Benefits - Bullet 5:
Undergo extreme impact, wear, and fatigue testing to ensure quality and durability
FAQ - Answer 1:
Yes. ACDelco Advantage Chassis parts are for both GM and non-GM vehicle applications.
Good Maintenance Practices - Section 1 - Bullet 3:
Use a sleeve rotating tool to rotate your tie rod end adjusting sleeve and apply penetrating oil to the clamps and sleeve before loosening it. Proper sleeve rotation is key to helping prevent damage and a loose fit between the sleeve and tie rod end.
Good Maintenance Practices - Section 1 - Bullet 4:
Installation of new tie rod components can interfere with the alignment of your vehicle. Perform a full four-wheel vehicle alignment after any tie rod replacement.
Length (Millimeter):
245.618
Features & Benefits - Bullet 8:
Greaseable design for long life
Features & Benefits - Bullet 10:
Manufactured at ISO 9001-certified facilities to ensure consistent high quality
Features & Benefits - Bullet 9:
Coated for corrosion resistance
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Tie Rod End Thread Diameter (in) (Inch):
0.945
Tie Rod End Thread Diameter (mm) (Millimeter):
24
Country of Origin:
China
Weight - Each (Gross Pounds):
02.50
Weight - Case (Gross Pounds):
30.00
Height - Each (Inch):
02.90
Height - Case (Inch):
15.20
Length - Each (Inch):
13.70
Length - Case (Inch):
12.00
Width - Each (Inch):
03.90
Width - Case (Inch):
11.80



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top