×
close

ACDelco 18J3995 | Jeep Liberty Front Right Brake Hydraulic Hose

(No reviews yet) Write a Review
$25.49
Part Number
ACD18J3995
UPC:
00808709013648
Condition:
New
5 customers are viewing this product
ACDelco Brake Hydraulic Hoses are quality reinforced hoses that carry fluid to transmit force within the hydraulic brake system. Each brake hose contains double-crimped fittings to provide longer service life and durability. The ACDelco Professional Brake Hydraulic Hose is a high quality replacement component for your vehicle's braking system. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
  • Jeep
  • Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
  • Premium brass fittings provide an excellent hydraulic seal

SPECIFICS:

Bracket MaterialCorrosion Resistant Steel
ColorBlack Hose,Silver Pipe
End 1 Fitting MaterialCorrosion Resistant Steel
End 1 Fitting TypeM10X1
End 1 Thread Diameter (in)0.375
End 1 Thread Diameter (mm)9.525
End 2 Fitting MaterialCorrosion Resistant Steel
End 2 Fitting Type0
FAQ - Answer 1Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
FAQ - Answer 2Yes, it is a good idea to inspect your brake fluid often.
FAQ - Answer 3Yes, both part offerings are high quality replacement parts.
FAQ - Question 1Are these brake parts durable?
FAQ - Question 2Do I need to check my brake fluid when replacing other brake parts?
FAQ - Question 3Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
Gasket Or Seal IncludedYes
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)1.3
Jacket MaterialEPDM Rubber
Length (in)7.3
Mounting Hardware IncludedYes
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Chirping, grinding, or squeaking noises when braking.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 6Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake rotor signs of wear include:
Teflon LinedNo
Weight (lb)0.55
Width (in)5.8

DOWNLOADS:

APPLICATIONS:

  • 2002-2007 Jeep Liberty - Position: Front Right
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Product Description:
Front Passenger Side Hydraulic Brake Hose Assembly
Mounting Hardware Included:
Yes
Programming Required:
No
Color:
Black Hose,Silver Pipe
Gasket Or Seal Included:
Yes
Axis 1 Length (Inch):
22.499
Bracket Material:
Corrosion Resistant Steel
End 2 Fitting Type:
0
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Premium brass fittings provide an excellent hydraulic seal
Features & Benefits - Bullet 3:
Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
Features & Benefits - Bullet 1:
Includes OE features such as brackets, grommets, molded plastic guards, and wire clips to provide correct fit and easy installation
Weight (lb) (Pound):
0.55
Height (in) (Inch):
1.3
Width (in) (Inch):
5.8
Length (in) (Inch):
7.3
Signs of Wear & Troubleshooting - Section 1 - Bull:
Visible ridges on rotor surface.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle.
Life Cycle Status:
Announced
Signs of Wear & Troubleshooting - Section 1 - Bull:
Chirping, grinding, or squeaking noises when braking.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Item Level GTIN:
00808709013648
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal.
FAQ - Answer 2:
Yes, it is a good idea to inspect your brake fluid often.
FAQ - Question 3:
Can I use ACDelco GM Original Equipment parts with my ACDelco Professional brake parts?
FAQ - Question 1:
Are these brake parts durable?
FAQ - Question 2:
Do I need to check my brake fluid when replacing other brake parts?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake rotor signs of wear include:
FAQ - Answer 1:
Yes, ACDelco Professional Brake Kits and Hardware come with a 12 month/ unlimited mile warranty.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
FAQ - Answer 3:
Yes, both part offerings are high quality replacement parts.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Teflon Lined:
No
End 1 Thread Diameter (in) (Inch):
0.375
End 1 Fitting Type:
M10X1
End 1 Thread Diameter (mm) (Millimeter):
9.525
Axis 1 Length (Millimeter):
571.4746
End 1 Fitting Material:
Corrosion Resistant Steel
End 2 Fitting Material:
Corrosion Resistant Steel
Jacket Material:
EPDM Rubber
Country of Origin:
China
Weight - Each (Gross Pounds):
00.55
Weight - Case (Gross Pounds):
05.50
Height - Each (Inch):
01.30
Height - Case (Inch):
08.30
Length - Each (Inch):
07.30
Length - Case (Inch):
11.30
Width - Each (Inch):
05.80
Width - Case (Inch):
06.30



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top