×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
MagnaFlow 94006 | Catalytic Converter
click to zoom in

MagnaFlow 94006 | Catalytic Converter

(No reviews yet) Write a Review
$139.00
Part Number
MAG94006
UPC:
00841380012357
Condition:
New
5 customers are viewing this product

video gallery

Description

BRAND: MagnaFlow Exhaust Products

FEATURES:

  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
  • Exhaust,MagnaFlow,Catalytic Convertor,Cadillac Convertor,Convertor,Emissions
  • Catalytic Converter
  • Universal Catalytic Converter - 2.50in.
  • Catalytic Converter
  • Universal Catalytic Converter - 2.50in.

SPECIFICS:

Air Tube AdaptableNo
Body Height3.75
Body Length12
Body MaterialStainless Steel
Body ShapeOval
Body TypeClam Shell
Body Width5.5
FinishStainless Steel
Heat Shield AttachedYes
Heat Shield IncludedYes
Heat Shield MaterialAluminized Steel
Inlet AttachmentWeld-On
Inlet Diameter2.5
Inlet OrientationStraight
Inlet Quantity1
MaterialStainless Steel
Outlet AttachmentWeld-On
Outlet Diameter2.5
Outlet OrientationStraight
Outlet Quantity1
Overall Length16
Oxygen Sensor LocationNone
Sensor Port Count0
SeriesStandard Grade
Substrate MaterialCeramic
SubtitleFederal / EPA Compliant
TitleStandard Grade Universal
TypeUniversal

DOWNLOADS:

APPLICATIONS:

  • 1980-1980 GMC K2500
    • Cutting and Welding Required During Installation
  • 1988-1994 Chevrolet S10 Blazer
    • Cutting and Welding Required During Installation
  • 1985-1992 Chevrolet Astro
    • Cutting and Welding Required During Installation
  • 1993-1993 GMC K1500
  • 1981-1982 Ford E-150 Econoline Club Wagon - Position: Rear
  • 1975-1980 Plymouth PB200
    • Cutting and Welding Required During Installation
  • 1990-1990 Ferrari 348 TS
    • Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet C10
    • Cutting and Welding Required During Installation
  • 1980-1980 Ferrari 308 GTS - Position: Left
    • Cutting and Welding Required During Installation
  • 1975-1978 GMC G15
    • Cutting and Welding Required During Installation
  • 1980-1980 Cadillac DeVille
    • Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet C10 Suburban
    • Cutting and Welding Required During Installation
  • 1975-1979 Oldsmobile Omega
    • Cutting and Welding Required During Installation
  • 1987-1987 Chevrolet R10
    • Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet C20
    • Cutting and Welding Required During Installation
  • 1979-1986 GMC K1500 Suburban
    • Cutting and Welding Required During Installation
  • 1975-1979 Oldsmobile Cutlass Salon
    • Cutting and Welding Required During Installation
  • 1980-1980 Oldsmobile Cutlass Salon
    • without Air Tube Cutting and Welding Required During Installation
  • 1980-1980 Oldsmobile Cutlass Cruiser
    • Cutting and Welding Required During Installation
  • 1975-1978 GMC C15 Suburban
    • Cutting and Welding Required During Installation
  • 1981-1982 GMC K2500
    • Converter Cutting and Welding Required During Installation
  • 1975-1994 Chevrolet G20
    • Cutting and Welding Required During Installation
  • 1986-1988 Ferrari 328 GTS
    • Cutting and Welding Required During Installation
  • 1979-1979 Oldsmobile Toronado
    • Cutting and Welding Required During Installation
  • 1975-1977 Pontiac Ventura
    • Cutting and Welding Required During Installation
  • 1980-1980 Buick Estate Wagon
    • Cutting and Welding Required During Installation
  • 1996-1999 GMC Savana 3500 - Position: Right
    • Cutting and Welding Required During Installation
  • 1976-1977 Chevrolet K5 Blazer - Position: Right
  • 1981-1981 Plymouth PB250
    • Cutting and Welding Required During Installation
  • 1979-1986 GMC K2500 Suburban
    • Cutting and Welding Required During Installation
  • 1979-1990 GMC G3500
    • Cutting and Welding Required During Installation
  • 1982-1988 Dodge D250 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1980-1980 Ferrari 308 GTS - Position: Right
  • 1981-1981 Dodge B150
    • Cutting and Welding Required During Installation
  • 1991-1994 Chevrolet G30
    • To 8,600lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1993-1993 GMC C1500
  • 1975-1975 Plymouth Gran Fury
    • Dual Exhaust Cutting and Welding Required During Installation
  • 1982-1987 Dodge B150 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1978-1978 GMC K25
    • Converter Cutting and Welding Required During Installation
  • 1975-1978 Plymouth PB100
    • Cutting and Welding Required During Installation
  • 1977-1979 Pontiac Phoenix
    • Cutting and Welding Required During Installation
  • 1985-1985 Buick Riviera
    • Cutting and Welding Required During Installation
  • 1975-1980 Chevrolet Monza
    • Cutting and Welding Required During Installation
  • 1977-1979 Ferrari 308 GTS
    • Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet K10 Suburban
    • Cutting and Welding Required During Installation
  • 1975-1980 Buick Skyhawk
    • Cutting and Welding Required During Installation
  • 1975-1975 Dodge D300
    • Cutting and Welding Required During Installation
  • 1977-1979 Oldsmobile Custom Cruiser
    • Cutting and Welding Required During Installation
  • 1981-1981 Plymouth PB350
    • Cutting and Welding Required During Installation
  • 1975-1982 Buick Regal
    • Cutting and Welding Required During Installation
  • 1976-1980 Oldsmobile Starfire
    • Cutting and Welding Required During Installation
  • 1983-1983 Ford E-150 Econoline Club Wagon - Position: Front
  • 1976-1980 Pontiac Parisienne
    • Cutting and Welding Required During Installation
  • 1986-1989 Chevrolet Corvette
    • Cutting and Welding Required During Installation
  • 1991-1995 Cadillac Eldorado
    • Cutting and Welding Required During Installation
  • 1982-1983 Plymouth PB250 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet K20 Suburban
    • Cutting and Welding Required During Installation
  • 1977-1977 Cadillac Seville
    • Early Models with 2-1/4in. Inlet Cutting and Welding Required During Installation
  • 1979-1980 International Scout II
    • Cutting and Welding Required During Installation
  • 1991-1991 GMC Syclone
    • Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet K5 Blazer
    • Cutting and Welding Required During Installation
  • 1978-1978 GMC K25 Suburban
    • Cutting and Welding Required During Installation
  • 1975-1980 Pontiac Firebird
    • Cutting and Welding Required During Installation
  • 1975-1979 Dodge D100
    • Cutting and Welding Required During Installation
  • 1988-1992 GMC C1500
    • Cutting and Welding Required During Installation
  • 1975-1980 Plymouth PB300
    • Cutting and Welding Required During Installation
  • 1975-1978 Chrysler Newport
    • Cutting and Welding Required During Installation
  • 1987-1987 Chevrolet R20
    • Cutting and Welding Required During Installation
  • 1981-1981 Dodge B350
    • Cutting and Welding Required During Installation
  • 1985-1988 Dodge W150 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1979-1986 GMC K1500
    • Cutting and Welding Required During Installation
  • 1991-1995 GMC Sonoma
    • Cutting and Welding Required During Installation
  • 1979-1979 GMC K2500
    • Converter Cutting and Welding Required During Installation
  • 1975-1981 Dodge Ramcharger
    • Cutting and Welding Required During Installation
  • 1981-1982 Ford E-100 Econoline - Position: Rear
  • 1976-1980 Chevrolet Chevette
    • Cutting and Welding Required During Installation
  • 1993-1993 Chevrolet K1500
  • 1976-1976 Chevrolet K10
    • Cutting and Welding Required During Installation Dual Exhaust Right
  • 1975-1977 Chevrolet Vega
    • Cutting and Welding Required During Installation
  • 1983-1983 Ford E-250 Econoline - Position: Front
  • 1981-1983 Jeep Cherokee
    • Cutting and Welding Required During Installation
  • 1981-1982 Ford E-150 Econoline - Position: Rear
  • 1983-1983 Ford E-100 Econoline - Position: Front
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 1988-1992 Chevrolet K1500
    • Cutting and Welding Required During Installation
  • 1988-1993 Chevrolet C2500
    • Cutting and Welding Required During Installation
  • 1980-1980 Ferrari 308 GTB - Position: Left
    • Cutting and Welding Required During Installation
  • 1990-1993 GMC C2500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1990-1993 Chevrolet K2500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1978-1981 Dodge W150
    • Cutting and Welding Required During Installation
  • 1990-1991 Chevrolet Corvette - Position: Right
    • Cutting and Welding Required During Installation
  • 1979-1986 GMC C2500 Suburban
    • Cutting and Welding Required During Installation
  • 1980-1980 Dodge B100 - Position: Center
    • Cutting and Welding Required During Installation
  • 1975-1994 Chevrolet G10
    • Cutting and Welding Required During Installation
  • 1981-1981 Dodge B250
    • Cutting and Welding Required During Installation
  • 1988-1988 Dodge W250
    • Cutting and Welding Required During Installation
  • 1980-1980 Oldsmobile Cutlass
    • without Air Tube Cutting and Welding Required During Installation
  • 1979-1986 GMC C1500 Suburban
    • Cutting and Welding Required During Installation
  • 1982-1987 Dodge B350 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1975-1982 Chevrolet LUV
    • Cutting and Welding Required During Installation
  • 1988-1991 GMC S15 Jimmy
    • Cutting and Welding Required During Installation
  • 1975-1978 GMC K25
    • Cutting and Welding Required During Installation
  • 1978-1979 Oldsmobile Cutlass Calais
    • Cutting and Welding Required During Installation
  • 1988-1992 Chevrolet C1500
    • Cutting and Welding Required During Installation
  • 1990-1991 Chevrolet Corvette - Position: Left
  • 1975-1975 Oldsmobile Vista Cruiser
    • Cutting and Welding Required During Installation
  • 1993-1993 Chevrolet C1500
    • without Y-Pipe Converter Cutting and Welding Required During Installation
  • 1975-1977 Plymouth Gran Fury - Position: Right
  • 1977-1978 Chevrolet K10
    • Cutting and Welding Required During Installation Dual Exhaust Left
  • 1981-1981 Dodge D250
    • Cutting and Welding Required During Installation
  • 1977-1977 Chevrolet K10 - Position: Right
    • Cutting and Welding Required During Installation Dual Exhaust
  • 1977-1977 Oldsmobile 98
    • Cutting and Welding Required During Installation
  • 1993-1993 GMC C1500
    • without Y-Pipe Converter Cutting and Welding Required During Installation
  • 1984-1985 Ford E-250 Econoline - Position: Front
    • Cutting and Welding Required During Installation
  • 1976-1978 Chevrolet K10
  • 1987-1987 GMC R1500
    • Cutting and Welding Required During Installation
  • 1985-1992 GMC Safari
    • Cutting and Welding Required During Installation
  • 1976-1977 Plymouth Gran Fury
    • Cutting and Welding Required During Installation
  • 1982-1987 Dodge B250 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1976-1976 Cadillac Seville
    • Cutting and Welding Required During Installation
  • 1980-1980 Ferrari 308 GTB - Position: Right
  • 1978-1978 Jeep Wagoneer
    • Cutting and Welding Required During Installation
  • 1976-1976 Oldsmobile Cutlass Tiara
    • Cutting and Welding Required During Installation
  • 1977-1980 Buick Electra
    • Cutting and Welding Required During Installation
  • 1979-1988 Jeep J20
    • Cutting and Welding Required During Installation
  • 1987-1987 Chevrolet Blazer
    • Cutting and Welding Required During Installation
  • 1981-1983 Jeep Wagoneer
    • Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet K20
    • Cutting and Welding Required During Installation
  • 1975-1978 GMC C15
    • Cutting and Welding Required During Installation
  • 1992-1995 GMC Jimmy
    • Cutting and Welding Required During Installation
  • 1975-1980 Chevrolet Caprice
    • Cutting and Welding Required During Installation
  • 1975-1980 Dodge B200
    • Cutting and Welding Required During Installation
  • 1976-1977 GMC K15
    • Cutting and Welding Required During Installation Dual Exhaust Left
  • 1981-1983 Ford E-150 Econoline
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1975-1978 Jeep CJ5
    • Cutting and Welding Required During Installation
  • 1975-1981 Pontiac LeMans
    • Cutting and Welding Required During Installation
  • 1981-1981 Plymouth PB150
    • Cutting and Welding Required During Installation
  • 1975-1979 Oldsmobile Cutlass Supreme
    • Cutting and Welding Required During Installation
  • 1975-1977 Dodge Royal Monaco
    • Cutting and Welding Required During Installation
  • 1975-1980 Buick Century
    • Cutting and Welding Required During Installation
  • 1983-1983 Plymouth PB150 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1979-1980 Chevrolet Monte Carlo
    • Cutting and Welding Required During Installation
  • 1988-1993 Chevrolet K2500
    • Cutting and Welding Required During Installation
  • 1993-1993 Chevrolet K1500
    • without Y-Pipe Converter Cutting and Welding Required During Installation
  • 1995-1995 Chevrolet Blazer
    • Cutting and Welding Required During Installation
  • 1977-1977 Cadillac Seville
  • 1975-1980 Buick LeSabre
    • Cutting and Welding Required During Installation
  • 1978-1979 GMC Caballero
    • Cutting and Welding Required During Installation
  • 1978-1981 Dodge D150
    • Cutting and Welding Required During Installation
  • 1993-1995 Jeep Grand Cherokee
    • Cutting and Welding Required During Installation
  • 1988-1993 GMC C2500
    • Cutting and Welding Required During Installation
  • 1975-1977 Dodge W100
    • Cutting and Welding Required During Installation
  • 1977-1980 Pontiac Bonneville
    • Cutting and Welding Required During Installation
  • 1992-1993 Isuzu Trooper
    • Cutting and Welding Required During Installation
  • 1991-1994 GMC G3500
    • To 8,600lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1983-1984 Mercury Capri
    • Cutting and Welding Required During Installation
  • 1975-1975 Buick Apollo
    • Cutting and Welding Required During Installation
  • 1977-1977 Pontiac Grand Safari
    • Cutting and Welding Required During Installation
  • 1975-1982 Checker Marathon
    • Cutting and Welding Required During Installation
  • 1978-1979 Ford Bronco
    • Cutting and Welding Required During Installation
  • 1985-1987 Dodge W250 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1991-1994 Oldsmobile Bravada
    • Cutting and Welding Required During Installation
  • 1978-1978 Jeep Cherokee
    • Cutting and Welding Required During Installation
  • 1979-1988 Jeep J10
    • Cutting and Welding Required During Installation
  • 1979-1986 GMC C2500
    • Cutting and Welding Required During Installation
  • 1995-1995 Oldsmobile Aurora
    • Cutting and Welding Required During Installation
  • 1992-1993 GMC Typhoon
    • Cutting and Welding Required During Installation
  • 1991-1995 Cadillac Seville
    • Cutting and Welding Required During Installation
  • 1981-1983 Ford E-150 Econoline Club Wagon
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1975-1980 Dodge B300
    • Cutting and Welding Required During Installation
  • 1979-1979 GMC C2500
    • Converter Cutting and Welding Required During Installation
  • 1977-1979 Ford F-250
    • Cutting and Welding Required During Installation
  • 1975-1976 Chevrolet Laguna
    • Cutting and Welding Required During Installation
  • 1990-1990 Ferrari 348 TB
    • Cutting and Welding Required During Installation
  • 1988-1990 GMC S15
    • Cutting and Welding Required During Installation
  • 1987-1987 Chevrolet V10
    • Cutting and Welding Required During Installation
  • 1988-1995 Chevrolet S10
    • Cutting and Welding Required During Installation
  • 1994-1995 Cadillac DeVille
    • Cutting and Welding Required During Installation
  • 1978-1978 GMC C25
    • Converter Cutting and Welding Required During Installation
  • 1978-1978 GMC G35
    • Cutting and Welding Required During Installation
  • 1976-1980 Oldsmobile Delta 88
    • Cutting and Welding Required During Installation
  • 1980-1980 Oldsmobile Cutlass Calais
    • without Air Tube Cutting and Welding Required During Installation
  • 1976-1980 Dodge W200
    • Cutting and Welding Required During Installation
  • 1975-1980 Dodge D200
    • Cutting and Welding Required During Installation
  • 1975-1981 Chevrolet Corvette
    • Cutting and Welding Required During Installation
  • 1980-1982 Maserati Quattroporte
    • Cutting and Welding Required During Installation
  • 1994-1995 Dodge Dakota
    • Cutting and Welding Required During Installation
  • 1975-1979 Oldsmobile Cutlass
    • Cutting and Welding Required During Installation
  • 1993-1993 Chevrolet C1500
    • with Y-Pipe Converter Cutting and Welding Required During Installation
  • 1976-1980 Pontiac Catalina
    • Cutting and Welding Required During Installation
  • 1976-1983 Jeep CJ7
    • Cutting and Welding Required During Installation
  • 1986-1988 Dodge W100 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1986-1988 Ferrari 328 GTB
    • Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet C20 Suburban
    • Cutting and Welding Required During Installation
  • 1975-1975 Dodge W300
    • Cutting and Welding Required During Installation
  • 1979-1986 GMC C1500
    • Cutting and Welding Required During Installation
  • 1975-1986 Chevrolet K10
    • Cutting and Welding Required During Installation
  • 1975-1980 Chevrolet Camaro
    • Cutting and Welding Required During Installation
  • 1987-1987 Chevrolet R10 Suburban
    • Cutting and Welding Required During Installation
  • 1976-1979 Ferrari 308 GTB
    • Cutting and Welding Required During Installation
  • 1975-1980 Chevrolet Malibu
    • Cutting and Welding Required During Installation
  • 1975-1978 GMC K15 Suburban
    • Cutting and Welding Required During Installation
  • 1982-1988 Dodge Ramcharger - Position: Rear
    • Cutting and Welding Required During Installation
  • 1975-1975 Chevrolet Bel Air
    • Cutting and Welding Required During Installation
  • 1975-1982 Ford E-100 Econoline Club Wagon
    • Cutting and Welding Required During Installation
  • 1975-1983 Ford E-150 Econoline
    • Cutting and Welding Required During Installation
  • 1975-1977 GMC Sprint
    • Cutting and Welding Required During Installation
  • 1983-1983 Ford E-100 Econoline Club Wagon - Position: Front
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 1976-1977 Chevrolet K5 Blazer - Position: Left
  • 1977-1977 Pontiac Astre
    • Cutting and Welding Required During Installation
  • 1981-1981 Dodge W250 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1976-1980 Pontiac Grand Prix
    • Cutting and Welding Required During Installation
  • 1982-1983 Plymouth PB350 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1981-1981 Jeep CJ5
    • Cutting and Welding Required During Installation
  • 1975-1978 GMC G25
    • Cutting and Welding Required During Installation
  • 1981-1982 GMC C2500
    • Converter Cutting and Welding Required During Installation
  • 1984-1985 Ford E-150 Econoline - Position: Front
    • Cutting and Welding Required During Installation
  • 1975-1979 Chevrolet Nova
    • Cutting and Welding Required During Installation
  • 1975-1987 GMC Jimmy
    • Cutting and Welding Required During Installation
  • 1993-1993 GMC K1500
    • without Y-Pipe Converter Cutting and Welding Required During Installation
  • 1983-1986 GMC K2500
    • Cutting and Welding Required During Installation
  • 1975-1978 GMC C25
    • Cutting and Welding Required During Installation
  • 1983-1983 Ford E-150 Econoline - Position: Front
  • 1983-1983 Jeep Scrambler
    • Cutting and Welding Required During Installation
  • 1979-1994 GMC G1500
    • Cutting and Welding Required During Installation
  • 1993-1993 Cadillac Allante
    • Cutting and Welding Required During Installation
  • 1981-1982 Ford E-100 Econoline Club Wagon
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1987-1987 GMC R1500 Suburban
    • Cutting and Welding Required During Installation
  • 1984-1985 Ford E-150 Econoline Club Wagon - Position: Front
    • Cutting and Welding Required During Installation
  • 1981-1982 Ford E-100 Econoline
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1989-1991 Peugeot 405
    • Cutting and Welding Required During Installation
  • 1981-1982 Ford E-250 Econoline - Position: Rear
  • 1978-1990 Chevrolet G30
    • Cutting and Welding Required During Installation
  • 1996-1996 GMC G3500 - Position: Right
    • Cutting and Welding Required During Installation
  • 1975-1978 Dodge Monaco
    • Cutting and Welding Required During Installation
  • 1975-1983 Ford E-250 Econoline Club Wagon
    • Cutting and Welding Required During Installation
  • 1988-1993 GMC K2500
    • Cutting and Welding Required During Installation
  • 1978-1978 GMC C25 Suburban
    • Cutting and Welding Required During Installation
  • 1987-1987 GMC R2500
    • Cutting and Welding Required During Installation
  • 1990-1993 Chevrolet C2500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1975-1979 Buick Skylark
    • Cutting and Welding Required During Installation
  • 1976-1980 Pontiac Sunbird
    • Cutting and Welding Required During Installation
  • 1975-1977 Chevrolet Monte Carlo
    • Cutting and Welding Required During Installation
  • 1980-1980 Oldsmobile Cutlass Supreme
    • without Air Tube Cutting and Welding Required During Installation
  • 1975-1980 Chevrolet Impala
    • Cutting and Welding Required During Installation
  • 1979-1994 GMC G2500
    • Cutting and Welding Required During Installation
  • 1983-1986 Ford Mustang
    • Cutting and Welding Required During Installation
  • 1977-1980 Buick Riviera
    • Cutting and Welding Required During Installation
  • 1975-1979 Dodge B100
    • Cutting and Welding Required During Installation
  • 1982-1988 Dodge D150 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1977-1977 Chevrolet K10 - Position: Left
  • 1976-1977 Plymouth Gran Fury
  • 1976-1977 GMC K15
  • 1981-1983 Ford E-250 Econoline
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1979-1980 Pontiac Grand Am
    • Cutting and Welding Required During Installation
  • 1975-1979 Chevrolet El Camino
    • Cutting and Welding Required During Installation
  • 1990-1993 GMC K2500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1979-1982 Ford E-100 Econoline
    • Cutting and Welding Required During Installation
  • 1975-1983 Ford E-250 Econoline
    • Cutting and Welding Required During Installation
  • 1987-1987 GMC V1500
    • Cutting and Welding Required During Installation
  • 1976-1977 Chevrolet K5 Blazer
    • Cutting and Welding Required During Installation Dual Exhaust
  • 1975-1981 Plymouth Trailduster
    • Cutting and Welding Required During Installation
  • 1981-1982 Ford E-100 Econoline Club Wagon - Position: Rear
  • 1975-1980 Pontiac Grand LeMans
    • Cutting and Welding Required During Installation
  • 1988-1992 GMC K1500
    • Cutting and Welding Required During Installation
  • 1977-1979 Ford F-150
    • Cutting and Welding Required During Installation
  • 1975-1983 Ford E-150 Econoline Club Wagon
    • Cutting and Welding Required During Installation
  • 1985-1988 Dodge D100 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1976-1977 Plymouth Gran Fury
    • Excluding Dual Exhaust Cutting and Welding Required During Installation
  • 1982-1987 Dodge W350
    • Cutting and Welding Required During Installation
  • 1975-1978 GMC K15
    • Cutting and Welding Required During Installation
  • 1993-1993 Chevrolet K1500
    • with Y-Pipe Converter Cutting and Welding Required During Installation
  • 1993-1993 Chevrolet C1500
Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Part Type:
Aftermarket
Features and Benefits:
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With
Brand Description:
Standard Grade Universal Catalytic Converter - 2.50in.
Meets or Exceeds Original Equipment Manufacture Specifications:
MagnaFlow Standard Grade Federal / EPA Compliant Universal Catalytic Converter 94006
Short Description:
Standard Grade
Inlet Type:
Weld-On
Outlet Type:
Weld-On
Air Tube Adaptable:
No
Body Shape:
Oval
Body Type:
Clam-Shell
Outlet Quantity:
1
Cut Type:
16
Edge Type:
5.5
Inlet Gasket Included:
No
Inlet Gasket Included:
12
Style:
3.75
Heat Shield Material:
Aluminized Steel
Clamps Included:
No
Outlet Diameter (MM):
2.5
Inlet Port Quantity:
2.5
Hangers Included:
No
Heat Shield Attached:
Yes
Life Cycle Status:
Available to Order
Sensor Port Count:
0
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Air Tube Count:
0
Item Level GTIN:
00841380012357
Outlet Gasket Included:
No
Quantity Per Application:
1
Inlet Quantity:
1
Outlet Orientation:
Straight
Inlet Orientation:
Straight
Tube Material:
Stainless Steel
Outlet Mounting Hardware Included:
No
Inlet Mounting Hardware Included:
No
Muffler Length Position Center (Inch):
No
Series:
Standard Grade
Substrate Material:
Ceramic
Universal Or Specific Fit:
Universal
Finish:
Stainless Steel
Hazardous Material:
No
Minimum Order Quantity:
1
Body Material:
Stainless Steel
Weight - Each (Gross Pounds):
6.0000
Height - Each (Inch):
4.5000
Length - Each (Inch):
17.7500
Width - Each (Inch):
7.0000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top