×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
MagnaFlow 94009 | Catalytic Converter
click to zoom in

MagnaFlow 94009 | Catalytic Converter

(No reviews yet) Write a Review
$139.00
Part Number
MAG94009
UPC:
00841380012388
Condition:
New
5 customers are viewing this product

video gallery

Description

BRAND: MagnaFlow Exhaust Products

FEATURES:

  • Universal Catalytic Converter - 3.00in.
  • Universal Catalytic Converter - 3.00in.
  • Exhaust,MagnaFlow,Catalytic Convertor,Cadillac Convertor,Convertor,Emissions
  • Catalytic Converter
  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94009 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
  • Catalytic Converter

SPECIFICS:

Air Tube AdaptableNo
Body Height3.75
Body Length12
Body MaterialStainless Steel
Body ShapeOval
Body TypeClam Shell
Body Width5.5
FinishStainless Steel
Heat Shield AttachedYes
Heat Shield IncludedYes
Heat Shield MaterialAluminized Steel
Inlet AttachmentWeld-On
Inlet Diameter3
Inlet OrientationStraight
Inlet Quantity1
MaterialStainless Steel
Outlet AttachmentWeld-On
Outlet Diameter3
Outlet OrientationStraight
Outlet Quantity1
Overall Length16
Oxygen Sensor LocationNone
Sensor Port Count0
SeriesStandard Grade
Substrate MaterialCeramic
SubtitleFederal / EPA Compliant
TitleStandard Grade Universal
TypeUniversal

DOWNLOADS:

APPLICATIONS:

  • 1987-1995 Chevrolet G20
    • Cutting and Welding Required During Installation
  • 1988-1989 Chevrolet C2500 - Position: Rear
  • 1987-1987 GMC R2500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1987 Chevrolet V20
    • Cutting and Welding Required During Installation
  • 1990-1995 GMC C3500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1987 Chevrolet R20 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1988-1989 Chevrolet C3500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1989-1989 Chevrolet V3500 - Position: Rear
  • 1989-1991 Chevrolet R1500 Suburban
    • Cutting and Welding Required During Installation
  • 1987-1988 Chevrolet R20 - Position: Rear
  • 1987-1993 GMC G1500
    • Cutting and Welding Required During Installation
  • 1994-1994 Chevrolet Blazer
    • without Y-Pipe Converter Cutting and Welding Required During Installation
  • 1990-1995 Chevrolet C3500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1991-1994 GMC G3500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1988-1992 Chevrolet K1500
    • Cutting and Welding Required During Installation
  • 1987-1990 Chevrolet G30 - Position: Rear
  • 1987-1988 Chevrolet V30 - Position: Rear
  • 1990-1993 GMC C2500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1988-1989 GMC C2500 - Position: Front
    • Cutting and Welding Required During Installation
  • 1987-1989 GMC V3500 - Position: Rear
  • 1990-1993 Chevrolet K2500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1988-1989 Chevrolet C2500 - Position: Front
    • Cutting and Welding Required During Installation
  • 1988-1992 GMC C1500
    • Cutting and Welding Required During Installation
  • 1987-1987 GMC R3500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1995 GMC G2500
    • Cutting and Welding Required During Installation
  • 1988-1989 GMC C2500 - Position: Rear
  • 1988-1989 Chevrolet K2500 - Position: Front
    • Cutting and Welding Required During Installation
  • 1988-1992 GMC K1500
    • Cutting and Welding Required During Installation
  • 1993-1993 Chevrolet K1500
    • without Y-Pipe Converter Cutting and Welding Required During Installation
  • 1990-1991 Chevrolet R3500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1992-1992 Dodge B350
    • Cutting and Welding Required During Installation
  • 1990-1995 GMC K3500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1989-1991 Chevrolet V2500 Suburban
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1990-1991 GMC R3500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1990-1991 Chevrolet V3500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1992-1995 GMC Safari
    • Cutting and Welding Required During Installation
  • 1988-1989 GMC Jimmy
    • Cutting and Welding Required During Installation
  • 1988-1989 Chevrolet K2500 - Position: Rear
  • 1988-1988 Chevrolet R20 - Position: Front
    • Cutting and Welding Required During Installation
  • 1987-1993 Chevrolet G10
    • Cutting and Welding Required During Installation
  • 1988-1989 GMC K2500 - Position: Rear
  • 1991-1991 GMC Jimmy
    • Cutting and Welding Required During Installation
  • 1987-1991 GMC V2500 Suburban
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1990-1995 Chevrolet K3500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1988-1989 GMC C3500 - Position: Rear
  • 1988-1989 Chevrolet K3500 - Position: Rear
  • 1992-1993 GMC K2500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1992-1993 Chevrolet K1500 Suburban
    • Cutting and Welding Required During Installation
  • 1995-1995 Pontiac Firebird
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1987-1989 GMC R3500 - Position: Rear
  • 1987-1988 Chevrolet R30 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1989-1989 Chevrolet R3500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1988-1992 Chevrolet C1500
    • Cutting and Welding Required During Installation
  • 1988-1989 GMC K2500 - Position: Front
    • Cutting and Welding Required During Installation
  • 1993-1993 Chevrolet C1500
    • without Y-Pipe Converter Cutting and Welding Required During Installation
  • 1993-1993 GMC C1500
    • without Y-Pipe Converter Cutting and Welding Required During Installation
  • 1987-1987 GMC R1500
    • Cutting and Welding Required During Installation
  • 1987-1991 GMC R2500 Suburban - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1993 Chevrolet Blazer
    • Cutting and Welding Required During Installation
  • 1992-1993 GMC K1500 Suburban
    • Cutting and Welding Required During Installation
  • 1987-1988 Chevrolet R10 Suburban
    • Cutting and Welding Required During Installation
  • 1988-1989 GMC K3500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1989 GMC V3500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1991 GMC V1500 Suburban
    • Cutting and Welding Required During Installation
  • 1988-1989 GMC K3500 - Position: Rear
  • 1995-1995 GMC G1500
    • Cutting and Welding Required During Installation
  • 1988-1988 GMC R3500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Dual Converters Cutting and Welding Required During Installation
  • 1987-1988 Chevrolet R20 Suburban
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1993-1993 GMC K1500
    • without Y-Pipe Converter Cutting and Welding Required During Installation
  • 1992-1995 Chevrolet Astro
    • Cutting and Welding Required During Installation
  • 1987-1990 GMC G3500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1987 GMC V2500
  • 1995-1995 GMC G3500
    • To 9,000lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1991 GMC R1500 Suburban
    • Cutting and Welding Required During Installation
  • 1995-1995 Chevrolet Camaro
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1988-1989 GMC R2500 - Position: Front
    • Cutting and Welding Required During Installation
  • 1992-1993 GMC C1500 Suburban
    • Cutting and Welding Required During Installation
  • 1995-1995 Chevrolet G10
    • Cutting and Welding Required During Installation
  • 1993-1994 Chevrolet Camaro
    • Cutting and Welding Required During Installation
  • 1989-1989 Chevrolet V3500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1989-1991 Chevrolet V1500 Suburban
    • Cutting and Welding Required During Installation
  • 1993-1993 GMC K1500
  • 1992-1993 Dodge Dakota
    • Cutting and Welding Required During Installation
  • 1992-1993 GMC C2500 Suburban
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1992-1993 GMC K2500 Suburban - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1987 GMC V2500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1989-1991 Chevrolet R2500 Suburban
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1993-1994 Pontiac Firebird
    • Cutting and Welding Required During Installation
  • 1992-1993 GMC K2500 Suburban
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1991 GMC R2500 Suburban
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1994-1994 GMC Yukon
    • without Y-Pipe Converter Cutting and Welding Required During Installation
  • 1992-1993 GMC Yukon
    • Cutting and Welding Required During Installation
  • 1991-1994 Chevrolet G30
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1990 GMC G3500 - Position: Rear
  • 1992-1993 Dodge Ramcharger
    • Cutting and Welding Required During Installation
  • 1993-1993 GMC C1500
  • 1988-1989 Chevrolet K3500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1990-1991 GMC V3500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1992-1993 Chevrolet C2500 Suburban
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1990-1993 Chevrolet C2500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1988 Chevrolet V30 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1989 GMC R2500 - Position: Rear
  • 1989-1989 Chevrolet R3500 - Position: Rear
  • 1988-1989 Chevrolet C3500 - Position: Rear
  • 1991-1993 Chevrolet Caprice
    • Police Package Cutting and Welding Required During Installation
  • 1990-1990 GMC K2500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1987 GMC V1500
    • Cutting and Welding Required During Installation
  • 1988-1989 GMC C3500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1988 Chevrolet V10 Suburban
    • Cutting and Welding Required During Installation
  • 1992-1993 Chevrolet K2500 Suburban
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1988 Chevrolet V20 Suburban
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1988 Chevrolet R30 - Position: Rear
  • 1989-1989 GMC R3500 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1987-1990 Chevrolet G30 - Position: Front
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1992-1993 Chevrolet C1500 Suburban
    • Cutting and Welding Required During Installation
Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Part Type:
Aftermarket
Features and Benefits:
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94009 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With
Brand Description:
Standard Grade Universal Catalytic Converter - 3.00in.
Meets or Exceeds Original Equipment Manufacture Specifications:
MagnaFlow Standard Grade Federal / EPA Compliant Universal Catalytic Converter 94009
Short Description:
Standard Grade
Inlet Type:
Weld-On
Outlet Type:
Weld-On
Air Tube Adaptable:
No
Body Shape:
Oval
Body Type:
Clam-Shell
Outlet Quantity:
1
Cut Type:
16
Edge Type:
5.5
Inlet Gasket Included:
12
Inlet Gasket Included:
No
Style:
3.75
Heat Shield Material:
Aluminized Steel
Clamps Included:
No
Outlet Diameter (MM):
3
Inlet Port Quantity:
3
Hangers Included:
No
Heat Shield Attached:
Yes
Life Cycle Status:
Available to Order
Sensor Port Count:
0
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Air Tube Count:
0
Item Level GTIN:
00841380012388
Outlet Gasket Included:
No
Quantity Per Application:
1
Inlet Quantity:
1
Outlet Orientation:
Straight
Inlet Orientation:
Straight
Tube Material:
Stainless Steel
Outlet Mounting Hardware Included:
No
Inlet Mounting Hardware Included:
No
Muffler Length Position Center (Inch):
No
Series:
Standard Grade
Substrate Material:
Ceramic
Universal Or Specific Fit:
Universal
Finish:
Stainless Steel
Hazardous Material:
No
Minimum Order Quantity:
1
Body Material:
Stainless Steel
Weight - Each (Gross Pounds):
6.0000
Height - Each (Inch):
4.5000
Length - Each (Inch):
17.7500
Width - Each (Inch):
7.0000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top