×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
MagnaFlow 94014 | Catalytic Converter
click to zoom in

MagnaFlow 94014 | Catalytic Converter

(No reviews yet) Write a Review
$148.00
Part Number
MAG94014
UPC:
00841380012401
Condition:
New
5 customers are viewing this product

video gallery

Description

BRAND: MagnaFlow Exhaust Products

FEATURES:

  • MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94014 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
  • Universal Catalytic Converter - 2.00in.
  • Universal Catalytic Converter - 2.00in.
  • Exhaust,MagnaFlow,Catalytic Convertor,Cadillac Convertor,Convertor,Emissions
  • Catalytic Converter
  • Catalytic Converter

SPECIFICS:

Air Tube AdaptableYes
Air Tube Count1
Body Height3.75
Body Length12
Body MaterialStainless Steel
Body ShapeOval
Body TypeClam Shell
Body Width5.5
FinishStainless Steel
Heat Shield AttachedYes
Heat Shield IncludedYes
Heat Shield MaterialAluminized Steel
Inlet AttachmentWeld-On
Inlet Diameter2
Inlet OrientationStraight
Inlet Quantity1
MaterialStainless Steel
Outlet AttachmentWeld-On
Outlet Diameter2
Outlet OrientationStraight
Outlet Quantity1
Overall Length16
Oxygen Sensor LocationNone
Sensor Port Count0
SeriesStandard Grade
Substrate MaterialCeramic
SubtitleFederal / EPA Compliant
TitleStandard Grade Universal
TypeUniversal

DOWNLOADS:

APPLICATIONS:

  • 1988-1989 Yugo GVL
    • Cutting and Welding Required During Installation
  • 1981-1983 Dodge Omni - Position: Front
    • Cutting and Welding Required During Installation
  • 1984-1984 Buick Skyhawk
    • without Air Tube Cutting and Welding Required During Installation
  • 1982-1982 Chrysler Cordoba
    • Cutting and Welding Required During Installation
  • 1984-1986 Pontiac 6000
    • Cutting and Welding Required During Installation
  • 1982-1983 Chevrolet Citation
    • Cutting and Welding Required During Installation
  • 1980-1983 American Motors Concord - Position: Rear
    • Cutting and Welding Required During Installation
  • 1984-1987 Dodge Caravan
    • Cutting and Welding Required During Installation
  • 1983-1990 Dodge Omni
    • Cutting and Welding Required During Installation
  • 1983-1983 Ford Mustang
    • Cutting and Welding Required During Installation
  • 1983-1987 Hyundai Pony
    • Cutting and Welding Required During Installation
  • 1980-1986 Mercury Grand Marquis - Position: Left
    • Cutting and Welding Required During Installation
  • 1986-1987 Chrysler New Yorker
    • Cutting and Welding Required During Installation
  • 1982-1982 Chrysler LeBaron - Position: Rear
  • 1985-1987 Hyundai Stellar
    • Cutting and Welding Required During Installation
  • 1983-1983 Pontiac 6000
    • Air Tube Cutting and Welding Required During Installation
  • 1983-1983 Dodge Mirada
    • Air Tube Cutting and Welding Required During Installation
  • 1986-1986 Oldsmobile Firenza
    • without Air Tube Cutting and Welding Required During Installation
  • 1980-1980 Dodge Omni
    • Cutting and Welding Required During Installation
  • 1983-1983 Dodge Omni - Position: Front
  • 1983-1985 Ford Thunderbird - Position: Right
    • Cutting and Welding Required During Installation
  • 1982-1985 Lincoln Town Car - Position: Left
    • Cutting and Welding Required During Installation
  • 1988-1989 Ford Festiva
    • Cutting and Welding Required During Installation
  • 1983-1983 Oldsmobile Firenza
  • 1981-1982 Mercury Lynx
    • Cutting and Welding Required During Installation
  • 1983-1994 Ford Ranger
    • Cutting and Welding Required During Installation
  • 1982-1983 Oldsmobile Cutlass Ciera
    • without Air Tube Cutting and Welding Required During Installation
  • 1981-1982 Plymouth Reliant
    • with Single Converter Cutting and Welding Required During Installation
  • 1983-1993 Chrysler LeBaron
    • Cutting and Welding Required During Installation
  • 1982-1982 Chrysler LeBaron - Position: Front
    • Cutting and Welding Required During Installation
  • 1982-1982 Chevrolet Camaro
    • Cutting and Welding Required During Installation
  • 1982-1982 Pontiac 6000
    • Cutting and Welding Required During Installation
  • 1981-1989 Dodge Aries
    • Cutting and Welding Required During Installation
  • 1980-1980 Mercury Bobcat - Position: Rear
    • Cutting and Welding Required During Installation
  • 1987-1990 Jeep Wrangler
    • Cutting and Welding Required During Installation
  • 1983-1990 Toyota Tercel
    • Cutting and Welding Required During Installation
  • 1984-1987 Plymouth Voyager
    • Cutting and Welding Required During Installation
  • 1990-1990 Plymouth Sundance
    • without Air Tube Cutting and Welding Required During Installation
  • 1984-1984 Chevrolet Cavalier
    • without Air Tube Cutting and Welding Required During Installation
  • 1983-1984 Oldsmobile Firenza
    • without Air Tube Cutting and Welding Required During Installation
  • 1984-1984 Mazda RX-7 - Position: N/A
    • Cutting and Welding Required During Installation
  • 1981-1983 Dodge Omni - Position: Rear
  • 1982-1982 Chrysler Town & Country - Position: Front
    • Cutting and Welding Required During Installation
  • 1981-1981 Lincoln Town Car - Position: Left
    • Air Tube Cutting and Welding Required During Installation
  • 1989-1995 Plymouth Acclaim
    • Cutting and Welding Required During Installation
  • 1982-1984 Dodge Rampage
    • Cutting and Welding Required During Installation
  • 1983-1986 Dodge Charger
    • Cutting and Welding Required During Installation
  • 1982-1982 Pontiac Firebird
    • Cutting and Welding Required During Installation
  • 1986-1986 Peugeot 505
    • without Air Tube Cutting and Welding Required During Installation
  • 1982-1986 Jeep CJ7
    • Cutting and Welding Required During Installation
  • 1987-1988 Dodge Dakota
    • Cutting and Welding Required During Installation
  • 1989-1989 Mercury Grand Marquis - Position: Right
  • 1982-1985 Buick Skylark
    • Cutting and Welding Required During Installation
  • 1982-1982 Pontiac Phoenix
    • Cutting and Welding Required During Installation
  • 1982-1987 Jeep J10
    • Cutting and Welding Required During Installation
  • 1983-1984 Ford Ranger
    • Excluding High Altitude Package Cutting and Welding Required During Installation
  • 1984-1985 Plymouth Turismo - Position: Front
    • Air Tube Cutting and Welding Required During Installation
  • 1983-1985 Mercury Cougar - Position: Right
    • Cutting and Welding Required During Installation
  • 1993-1993 Plymouth Sundance
    • Air Tube Cutting and Welding Required During Installation
  • 1984-1984 Pontiac Phoenix
    • Cutting and Welding Required During Installation
  • 1981-1983 American Motors Spirit - Position: Rear
    • Cutting and Welding Required During Installation
  • 1977-1979 BMW 320i
    • Cutting and Welding Required During Installation
  • 1980-1986 Ford LTD - Position: Left
    • Cutting and Welding Required During Installation
  • 1981-1988 Plymouth Caravelle
    • Cutting and Welding Required During Installation
  • 1980-1980 American Motors Spirit
    • Cutting and Welding Required During Installation
  • 1982-1985 Jeep Wagoneer
    • Cutting and Welding Required During Installation
  • 1982-1983 Plymouth Horizon - Position: Rear
    • Cutting and Welding Required During Installation
  • 1982-1983 Oldsmobile Cutlass Ciera
  • 1985-1985 Mercury Grand Marquis - Position: Right
  • 1981-1981 Oldsmobile Omega
    • Air Tube Cutting and Welding Required During Installation
  • 1982-1983 Plymouth Horizon - Position: Front
  • 1980-1980 Chrysler LeBaron
    • Cutting and Welding Required During Installation
  • 1980-1980 American Motors AMX - Position: Rear
    • Cutting and Welding Required During Installation
  • 1989-1993 Chrysler Daytona - Position: Rear
    • Air Tube Cutting and Welding Required During Installation
  • 1984-1984 Mercury Grand Marquis - Position: Right
    • Cutting and Welding Required During Installation
  • 1981-1981 Chrysler Cordoba
    • Air Tube Cutting and Welding Required During Installation
  • 1983-1983 Pontiac 6000
  • 1983-1983 Oldsmobile Firenza
    • Air Tube Cutting and Welding Required During Installation
  • 1987-1990 Nissan Sentra
    • Cutting and Welding Required During Installation
  • 1981-1981 Jeep Cherokee
    • Air Tube Cutting and Welding Required During Installation
  • 1987-1988 Chrysler Daytona
    • Cutting and Welding Required During Installation
  • 1981-1981 Lincoln Town Car - Position: Right
  • 1983-1984 Chrysler Town & Country
    • Cutting and Welding Required During Installation
  • 1994-1994 Plymouth Sundance
    • Cutting and Welding Required During Installation
  • 1985-1985 Dodge Charger
  • 1982-1982 Dodge Diplomat - Position: Rear
    • Cutting and Welding Required During Installation
  • 1981-1981 Jeep Wagoneer
    • Air Tube Cutting and Welding Required During Installation
  • 1982-1982 Chrysler Town & Country - Position: Rear
  • 1989-1989 Mercury Grand Marquis - Position: Right
    • Replaces Both Front and Rear OE Converters Air Tube Cutting and Welding Required During Installation
  • 1993-1993 Plymouth Sundance
  • 1982-1982 Chevrolet Camaro
    • Air Tube Cutting and Welding Required During Installation
  • 1990-1990 Plymouth Sundance
    • Air Tube Cutting and Welding Required During Installation
  • 1980-1983 Lincoln Mark VI - Position: Left
    • Cutting and Welding Required During Installation
  • 1981-1983 Plymouth Horizon - Position: Rear
  • 1983-1983 Dodge Charger
  • 1989-1990 Laforza Laforza
    • Cutting and Welding Required During Installation
  • 1981-1987 Chevrolet Chevette
    • Cutting and Welding Required During Installation
  • 1988-1988 Toyota Corolla
    • Air Tube Cutting and Welding Required During Installation
  • 1986-1989 Yugo GV
    • Cutting and Welding Required During Installation
  • 1983-1983 Chevrolet Cavalier
    • Cutting and Welding Required During Installation
  • 1987-1991 Ford LTD Crown Victoria - Position: Left
    • Cutting and Welding Required During Installation
  • 1983-1989 Plymouth Reliant
    • Cutting and Welding Required During Installation
  • 1980-1980 Chrysler Cordoba
    • Cutting and Welding Required During Installation
  • 1985-1986 Dodge Charger - Position: Front
    • Air Tube Cutting and Welding Required During Installation
  • 1983-1987 Toyota Corolla
    • Cutting and Welding Required During Installation
  • 1980-1980 Lincoln Mark VI - Position: Right
  • 1989-1989 Mercury Grand Marquis - Position: Left
  • 1984-1986 Chrysler Laser
    • Cutting and Welding Required During Installation
  • 1986-1988 Chrysler Town & Country
    • Cutting and Welding Required During Installation
  • 1982-1984 Volkswagen Rabbit
    • Cutting and Welding Required During Installation
  • 1982-1984 Chrysler New Yorker
    • Cutting and Welding Required During Installation
  • 1982-1983 Plymouth Gran Fury - Position: Rear
    • Cutting and Welding Required During Installation
  • 1981-1983 Plymouth Horizon - Position: Front
    • Cutting and Welding Required During Installation
  • 1982-1983 Jeep CJ5
    • Cutting and Welding Required During Installation
  • 1983-1988 Dodge 600
    • Cutting and Welding Required During Installation
  • 1980-1981 Mercury Marquis - Position: Right
  • 1987-1989 Plymouth Sundance
    • Cutting and Welding Required During Installation
  • 1980-1980 Ford Pinto - Position: Rear
    • Cutting and Welding Required During Installation
  • 1987-1994 Dodge Shadow
    • Cutting and Welding Required During Installation
  • 1983-1983 Pontiac Phoenix
    • Air Tube Cutting and Welding Required During Installation
  • 1981-1987 Pontiac Acadian
    • Cutting and Welding Required During Installation
  • 1983-1983 Chrysler Fifth Avenue
    • Cutting and Welding Required During Installation
  • 1982-1983 Dodge 400
    • Cutting and Welding Required During Installation
  • 1981-1982 Ford Escort
    • Cutting and Welding Required During Installation
  • 1984-1985 Lincoln Mark VII - Position: Right
    • Cutting and Welding Required During Installation
  • 1991-1992 Plymouth Sundance
    • Cutting and Welding Required During Installation
  • 1985-1988 Chevrolet Nova
    • Cutting and Welding Required During Installation
  • 1987-1987 Mitsubishi Galant
    • Cutting and Welding Required During Installation
  • 1981-1987 Pontiac T1000
    • Cutting and Welding Required During Installation
  • 1990-1992 Alfa Romeo Spider
    • Cutting and Welding Required During Installation
  • 1983-1983 Mercury Capri - Position: Rear
    • Cutting and Welding Required During Installation
  • 1983-1983 Chrysler Cordoba
    • Air Tube Cutting and Welding Required During Installation
  • 1983-1983 Buick Skyhawk
    • Air Tube Cutting and Welding Required During Installation
  • 1980-1980 Plymouth Arrow
    • Cutting and Welding Required During Installation
  • 1983-1983 Chevrolet Camaro
    • without Air Tube Cutting and Welding Required During Installation
  • 1982-1982 Chevrolet Camaro
  • 1989-1989 Mercury Grand Marquis - Position: Left
    • Air Tube Replaces Both Front and Rear OE Converters Cutting and Welding Required During Installation
  • 1980-1981 Mercury Grand Marquis - Position: Right
  • 1981-1991 Mazda RX-7 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1986-1988 Nissan Multi
    • Cutting and Welding Required During Installation
  • 1989-1995 Dodge Spirit
    • Cutting and Welding Required During Installation
  • 1984-1985 Chevrolet Citation II
    • Cutting and Welding Required During Installation
  • 1983-1983 Pontiac Phoenix
    • without Air Tube Cutting and Welding Required During Installation
  • 1983-1984 Chrysler E Class
    • Cutting and Welding Required During Installation
  • 1984-1986 Oldsmobile Cutlass Ciera
    • Cutting and Welding Required During Installation
  • 1983-1983 Dodge Charger - Position: Rear
    • Cutting and Welding Required During Installation
  • 1981-1983 American Motors Eagle
    • Air Tube Cutting and Welding Required During Installation
  • 1982-1982 Mercury LN7
    • Cutting and Welding Required During Installation
  • 1982-1985 Jeep Scrambler
    • Cutting and Welding Required During Installation
  • 1984-1987 Nissan Micra
    • Cutting and Welding Required During Installation
  • 1988-1989 Yugo GVX
    • Cutting and Welding Required During Installation
  • 1985-1989 Dodge Lancer
    • Cutting and Welding Required During Installation
  • 1981-1988 American Motors Eagle
    • Cutting and Welding Required During Installation
  • 1980-1986 Ford LTD - Position: Right
  • 1981-1982 Plymouth Reliant - Position: Rear
  • 1982-1984 Oldsmobile Omega
    • Cutting and Welding Required During Installation
  • 1980-1983 Peugeot 504
    • Cutting and Welding Required During Installation
  • 1983-1983 Mercury Grand Marquis - Position: Right
  • 1980-1982 Mercury Marquis - Position: Left
    • Cutting and Welding Required During Installation
  • 1984-1987 Dodge Mini Ram
    • Cutting and Welding Required During Installation
  • 1989-1989 Pontiac Optima
    • Cutting and Welding Required During Installation
  • 1982-1982 Ford EXP
    • Cutting and Welding Required During Installation
  • 1983-1983 Pontiac 6000
    • without Air Tube Cutting and Welding Required During Installation
  • 1981-1981 Ford Mustang - Position: Rear
    • Air Tube Cutting and Welding Required During Installation
  • 1983-1983 Dodge Omni - Position: Rear
    • Cutting and Welding Required During Installation
  • 1988-1989 Pontiac Firefly
    • Cutting and Welding Required During Installation
  • 1982-1985 Jeep Cherokee
    • Cutting and Welding Required During Installation
  • 1982-1982 Dodge Mirada
    • Cutting and Welding Required During Installation
  • 1982-1986 Chevrolet Celebrity
    • Cutting and Welding Required During Installation
  • 1981-1983 American Motors Eagle - Position: Rear
    • Cutting and Welding Required During Installation
  • 1984-1986 Jeep Grand Wagoneer
    • Cutting and Welding Required During Installation
  • 1984-1984 Mercury Grand Marquis - Position: Left
  • 1984-1990 Plymouth Horizon
    • Cutting and Welding Required During Installation
  • 1982-1985 Buick Century
    • Cutting and Welding Required During Installation
  • 1984-1993 Dodge Daytona
    • Cutting and Welding Required During Installation
  • 1985-1985 Mazda RX-7 - Position: Front Forward
    • Cutting and Welding Required During Installation
  • 1980-1980 Plymouth Horizon
    • Cutting and Welding Required During Installation
  • 1982-1983 Oldsmobile Cutlass Ciera
    • Air Tube Cutting and Welding Required During Installation
  • 1983-1983 Dodge Diplomat
    • Air Tube Cutting and Welding Required During Installation
  • 1988-1988 Yugo GVS
    • Cutting and Welding Required During Installation
  • 1983-1983 Plymouth Scamp
    • Cutting and Welding Required During Installation
Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Part Type:
Aftermarket
Features and Benefits:
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94014 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With
Brand Description:
Standard Grade Universal Catalytic Converter - 2.00in.
Meets or Exceeds Original Equipment Manufacture Specifications:
MagnaFlow Standard Grade Federal / EPA Compliant Universal Catalytic Converter 94014
Short Description:
Standard Grade
Inlet Type:
Weld-On
Outlet Type:
Weld-On
Air Tube Adaptable:
Yes
Body Shape:
Oval
Body Type:
Clam-Shell
Outlet Quantity:
1
Cut Type:
16
Edge Type:
5.5
Inlet Gasket Included:
No
Inlet Gasket Included:
12
Style:
3.75
Heat Shield Material:
Aluminized Steel
Clamps Included:
No
Outlet Diameter (MM):
2
Inlet Port Quantity:
2
Hangers Included:
No
Heat Shield Attached:
Yes
Life Cycle Status:
Available to Order
Sensor Port Count:
0
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Air Tube Count:
1
Item Level GTIN:
00841380012401
Outlet Gasket Included:
No
Quantity Per Application:
1
Inlet Quantity:
1
Outlet Orientation:
Straight
Inlet Orientation:
Straight
Tube Material:
Stainless Steel
Outlet Mounting Hardware Included:
No
Inlet Mounting Hardware Included:
No
Muffler Length Position Center (Inch):
No
Series:
Standard Grade
Substrate Material:
Ceramic
Universal Or Specific Fit:
Universal
Finish:
Stainless Steel
Hazardous Material:
No
Minimum Order Quantity:
1
Body Material:
Stainless Steel
Weight - Each (Gross Pounds):
6.0000
Height - Each (Inch):
4.5000
Length - Each (Inch):
17.7500
Width - Each (Inch):
7.0000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top