×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
MagnaFlow 99004HM | Catalytic Converter
click to zoom in

MagnaFlow 99004HM | Catalytic Converter

(No reviews yet) Write a Review
$261.00
Part Number
MAG99004HM
UPC:
00841380031563
Condition:
New
5 customers are viewing this product

video gallery

Description

BRAND: MagnaFlow Exhaust Products

FEATURES:

  • Catalytic Converter
  • Catalytic Converter
  • MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99004HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
  • Universal Catalytic Converter - 2.00in.
  • Universal Catalytic Converter - 2.00in.
  • Exhaust,MagnaFlow,Catalytic Convertor,Cadillac Convertor,Convertor,Emissions

SPECIFICS:

Air Tube AdaptableNo
Body Height3.75
Body Length12
Body MaterialStainless Steel
Body ShapeOval
Body TypeClam Shell
Body Width5.5
FinishStainless Steel
Heat Shield AttachedYes
Heat Shield IncludedYes
Heat Shield MaterialAluminized Steel
Inlet AttachmentWeld-On
Inlet Diameter2
Inlet OrientationStraight
Inlet Quantity1
MaterialStainless Steel
Outlet AttachmentWeld-On
Outlet Diameter2
Outlet OrientationStraight
Outlet Quantity1
Overall Length16
Oxygen Sensor LocationNone
Sensor Port Count0
SeriesHM Grade
Substrate MaterialCeramic
SubtitleFederal / EPA Compliant
TitleHM Grade Universal
TypeUniversal

DOWNLOADS:

APPLICATIONS:

  • 1996-1997 Ford Aspire
    • Cutting and Welding Required During Installation
  • 2000-2004 Ford Focus
    • Cutting and Welding Required During Installation
  • 2000-2000 GMC Yukon - Position: Right
  • 2003-2003 Ford Crown Victoria - Position: Rear Right
  • 2000-2001 Saturn SC2 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1995-1998 Mazda MPV - Position: Front
    • Cutting and Welding Required During Installation
  • 1996-1998 Ford Mustang - Position: Rear Left
    • Cutting and Welding Required During Installation
  • 1995-1997 Kia Sportage
    • Cutting and Welding Required During Installation
  • 1996-2000 GMC K2500
    • Cutting and Welding Required During Installation
  • 2004-2004 Nissan Xterra - Position: Left
  • 2002-2007 Kia Spectra
    • Cutting and Welding Required During Installation
  • 1996-1999 Saturn SC2
    • Cutting and Welding Required During Installation
  • 1996-1999 Chevrolet K1500 Suburban
    • Single Inlet Muffler Cutting and Welding Required During Installation
  • 1996-1998 Ford Mustang - Position: Left
    • Cutting and Welding Required During Installation
  • 1996-1998 Ford Mustang - Position: Right
  • 1996-1997 Mazda B4000 - Position: Rear
  • 2002-2002 Saturn SL - Position: Rear
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 1996-1997 Toyota Previa - Position: Rear
  • 2011-2011 Toyota Camry
    • Cutting and Welding Required During Installation
  • 2000-2000 GMC Yukon - Position: Left
    • Dual Inlet Muffler Cutting and Welding Required During Installation
  • 2000-2005 Mitsubishi Eclipse - Position: Rear
    • Cutting and Welding Required During Installation
  • 2001-2001 Saturn SW2 - Position: Rear
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 1996-1996 Ford Escort
    • Cutting and Welding Required During Installation
  • 2002-2005 Kia Optima - Position: Rear
    • Cutting and Welding Required During Installation
  • 2003-2003 Mercedes-Benz ML320 - Position: Rear Left
    • Cutting and Welding Required During Installation
  • 1996-2000 Chevrolet K3500 - Position: Rear
  • 1998-1998 Ford Windstar - Position: Right
  • 2003-2004 Toyota Tundra - Position: Left
    • Cutting and Welding Required During Installation
  • 1996-2000 Chevrolet K3500
    • Cutting and Welding Required During Installation
  • 2000-2000 Jaguar S-Type - Position: Right
    • Cutting and Welding Required During Installation
  • 2002-2004 Nissan Xterra - Position: Right
  • 2000-2000 Saturn SL1 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1996-1997 Geo Metro - Position: Rear
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 1996-1999 Ford Taurus - Position: Front
    • Cutting and Welding Required During Installation
  • 1999-1999 Pontiac Firefly
    • Cutting and Welding Required During Installation
  • 2001-2003 Mazda Protege - Position: Rear
    • Cutting and Welding Required During Installation
  • 2001-2001 Nissan Frontier - Position: Rear Right
    • Cutting and Welding Required During Installation
  • 2005-2007 Mercury Montego - Position: Center
    • Cutting and Welding Required During Installation
  • 2001-2001 Saturn SL1
    • Cutting and Welding Required During Installation
  • 2000-2004 Toyota Tundra - Position: Right
  • 1997-2000 GMC C3500 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1997-1998 GMC Yukon
  • 1996-1996 GMC C3500 - Position: Rear Left
  • 1999-2003 Mitsubishi Galant - Position: Rear
    • Cutting and Welding Required During Installation
  • 1998-2001 Suzuki Swift - Position: Rear
  • 1996-1996 Buick Century
    • Cutting and Welding Required During Installation
  • 2003-2003 Nissan Xterra - Position: Left
    • Cutting and Welding Required During Installation
  • 2002-2006 Kia Optima
    • Cutting and Welding Required During Installation
  • 2004-2007 Ford Crown Victoria - Position: Rear Left
  • 1996-1999 Chevrolet K1500
    • Cutting and Welding Required During Installation
  • 1996-1999 GMC C2500 Suburban
    • Cutting and Welding Required During Installation
  • 1987-1987 BMW M6
    • Cutting and Welding Required During Installation
  • 2002-2002 Saturn SC2 - Position: Rear
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 2002-2002 Saturn SL2 - Position: Rear
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 2000-2000 Nissan Xterra - Position: Rear Left
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 1995-1998 Mazda Protege - Position: Rear
    • Cutting and Welding Required During Installation
  • 1996-1999 Isuzu Oasis
    • Cutting and Welding Required During Installation
  • 2001-2004 Mazda Tribute
    • Cutting and Welding Required During Installation
  • 1998-1999 Saturn SL
    • Cutting and Welding Required During Installation
  • 1996-1999 GMC K1500
    • Cutting and Welding Required During Installation
  • 2002-2002 Nissan Xterra - Position: Left
  • 1996-1997 Mazda B4000 - Position: Front
    • Cutting and Welding Required During Installation
  • 1999-1999 GMC Yukon - Position: Right
    • Cutting and Welding Required During Installation
  • 2003-2005 Mazda 6 - Position: Rear Left
    • Cutting and Welding Required During Installation
  • 2003-2006 Lincoln Town Car - Position: Rear Left
    • Cutting and Welding Required During Installation
  • 1996-2000 GMC C3500 - Position: Front Left
  • 1997-1997 Infiniti QX4 - Position: Rear Right
  • 1996-1996 Mitsubishi Montero
    • Cutting and Welding Required During Installation
  • 1996-1999 GMC K1500 Suburban
    • Cutting and Welding Required During Installation
  • 2000-2001 Saturn SC1 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2001-2003 Infiniti QX4 - Position: Right
  • 2001-2002 Mazda Millenia
    • Cutting and Welding Required During Installation
  • 2002-2003 Mazda Protege5 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1995-1995 Chrysler Sebring - Position: Front
    • Cutting and Welding Required During Installation
  • 1999-2002 Daewoo Nubira - Position: Rear
    • Cutting and Welding Required During Installation
  • 1996-2000 Mercury Mystique - Position: Rear
    • Cutting and Welding Required During Installation
  • 1995-1995 Mazda B4000 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1998-2001 Chevrolet Metro - Position: Rear
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 1996-1997 Toyota Previa - Position: Front
    • Cutting and Welding Required During Installation
  • 1996-1997 Lexus LS400 - Position: Front Left
    • Cutting and Welding Required During Installation
  • 2002-2002 Saturn SL1
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 2005-2009 Hyundai Tucson
    • Cutting and Welding Required During Installation
  • 2000-2002 Toyota Tundra - Position: Front Right
  • 2004-2004 Nissan Xterra - Position: Rear Left
    • Cutting and Welding Required During Installation
  • 1996-2000 Chevrolet C3500 - Position: Front
  • 1996-1999 Chevrolet C1500 Suburban
  • 1996-1999 Saturn SW2
    • Cutting and Welding Required During Installation
  • 1996-1999 Chevrolet K1500 Suburban
  • 1996-2002 Suzuki Esteem - Position: Rear
    • Cutting and Welding Required During Installation
  • 1999-2000 Cadillac Escalade
    • Dual Inlet Muffler Cutting and Welding Required During Installation
  • 1996-1997 Ford Aerostar - Position: Rear
  • 1999-2002 Dodge Dakota
    • Cutting and Welding Required During Installation
  • 1995-2002 Lincoln Continental - Position: Front Left
    • Cutting and Welding Required During Installation
  • 1996-2000 Chevrolet C3500 - Position: Rear
  • 1996-1997 Ford Contour - Position: Rear
    • Cutting and Welding Required During Installation
  • 1996-1999 GMC C1500
    • Cutting and Welding Required During Installation
  • 1999-2002 Daewoo Lanos - Position: Rear
    • Cutting and Welding Required During Installation
  • 1996-2000 Chevrolet C2500
    • Cutting and Welding Required During Installation
  • 1995-1995 Ford Windstar - Position: Left
  • 1999-1999 GMC Yukon - Position: Left
  • 1997-1999 Mitsubishi Montero Sport
    • Cutting and Welding Required During Installation
  • 2002-2005 Hyundai Sonata
    • Cutting and Welding Required During Installation
  • 2000-2000 Chevrolet C3500
    • To 8,500lbs. Gross Vehicle Weight Cutting and Welding Required During Installation
  • 1996-1999 Chrysler Sebring
    • Cutting and Welding Required During Installation
  • 2002-2003 Dodge Ram 1500
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 1996-1996 Mazda B3000 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2001-2004 Nissan Pathfinder - Position: Rear Right
  • 1996-1998 Mazda Protege
    • Cutting and Welding Required During Installation
  • 2005-2007 Mercury Montego - Position: Front
  • 1996-2000 Chevrolet K3500 - Position: Front
  • 2003-2005 Mazda 6 - Position: Rear Right
  • 1996-2000 Chevrolet Tahoe
    • Single Inlet Muffler Cutting and Welding Required During Installation
  • 1997-1998 GMC Yukon
    • Single Inlet Muffler Cutting and Welding Required During Installation
  • 2001-2002 Kia Sportage - Position: Rear
    • Cutting and Welding Required During Installation
  • 1998-1999 Saturn SC1
    • Cutting and Welding Required During Installation
  • 2005-2007 Ford Freestyle - Position: Center
  • 1996-1999 GMC K2500 Suburban
    • Cutting and Welding Required During Installation
  • 2000-2001 Saturn SL2 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2002-2002 Saturn SC1 - Position: Rear
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 1996-1996 Mazda B3000 - Position: Front
  • 2000-2000 Jaguar S-Type - Position: Left
  • 1996-1996 GMC C3500 - Position: Left
    • Cutting and Welding Required During Installation
  • 2001-2004 Nissan Pathfinder - Position: Rear Left
    • Cutting and Welding Required During Installation
  • 1997-1999 Mitsubishi Montero Sport - Position: Rear
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2006-2007 Mazda 5
    • Cutting and Welding Required During Installation
  • 1996-1999 Saturn SL2
    • Cutting and Welding Required During Installation
  • 1998-1999 Saturn SW1
    • Cutting and Welding Required During Installation
  • 2001-2002 Nissan Xterra - Position: Rear Left
    • Cutting and Welding Required During Installation
  • 2003-2007 Mercury Grand Marquis - Position: Left
    • Cutting and Welding Required During Installation
  • 2005-2007 Ford Freestyle - Position: Front
    • Cutting and Welding Required During Installation
  • 1996-1998 Ford Mustang - Position: Rear Right
  • 2000-2001 Kia Spectra - Position: Rear
    • Cutting and Welding Required During Installation
  • 2005-2007 Ford Five Hundred - Position: Center
    • Cutting and Welding Required During Installation
  • 1996-1999 Chevrolet C1500
    • Cutting and Welding Required During Installation
  • 1998-2000 Ford Windstar - Position: Left
    • Cutting and Welding Required During Installation
  • 1996-1997 Ford Aerostar - Position: Front
    • Cutting and Welding Required During Installation
  • 2003-2003 Ford Crown Victoria - Position: Rear Left
    • Cutting and Welding Required During Installation
  • 1996-2000 GMC K3500 - Position: Rear Left
  • 1995-2001 Suzuki Swift - Position: Front
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2001-2001 Kia Spectra
  • 1996-2000 Chevrolet K2500
    • Cutting and Welding Required During Installation
  • 2003-2003 Nissan Xterra - Position: Rear Left
  • 1997-1997 Geo Metro - Position: Rear
  • 2005-2007 Kia Spectra5
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 1998-1999 Saturn SL1
    • Cutting and Welding Required During Installation
  • 1998-1999 Mazda B4000 - Position: Rear
    • Cutting and Welding Required During Installation
  • 1996-1996 Chrysler Sebring - Position: Front
  • 2000-2001 Saturn SL - Position: Rear
    • Cutting and Welding Required During Installation
  • 1996-1996 Ford Windstar - Position: Left
    • Cutting and Welding Required During Installation
  • 1996-1999 Chevrolet C3500
    • Cutting and Welding Required During Installation
  • 1996-1999 Chevrolet C2500 Suburban
    • Cutting and Welding Required During Installation
  • 1997-1997 Infiniti QX4 - Position: Rear Left
    • California Emissions Equipped Vehicles Registered Outside Of California Cutting and Welding Required During Installation
  • 1995-1999 Dodge Avenger
    • Cutting and Welding Required During Installation
  • 1996-2000 Mitsubishi Montero - Position: Rear
    • Cutting and Welding Required During Installation
  • 1996-2000 GMC K3500 - Position: Left
    • Cutting and Welding Required During Installation
  • 2000-2002 Toyota Tundra - Position: Left
  • 1998-2001 Ford Escort
    • Cutting and Welding Required During Installation
  • 1995-1997 Ford Windstar - Position: Right
    • Cutting and Welding Required During Installation
  • 2000-2002 Lincoln LS - Position: Right
  • 1999-2005 Mazda Miata
    • Cutting and Welding Required During Installation
  • 1996-1999 Chevrolet K2500 Suburban
    • Cutting and Welding Required During Installation
  • 1996-1996 Chrysler Sebring
  • 1998-1999 Lexus LS400 - Position: Left
    • Cutting and Welding Required During Installation
  • 1996-1999 GMC C1500 Suburban
    • Cutting and Welding Required During Installation
  • 1996-1999 Chevrolet C1500 Suburban
    • Single Inlet Muffler Cutting and Welding Required During Installation
  • 2000-2002 Lincoln LS - Position: Left
    • Cutting and Welding Required During Installation
  • 2003-2007 Mercury Grand Marquis - Position: Right
  • 1996-1997 Land Rover Range Rover - Position: Left
    • Cutting and Welding Required During Installation
  • 1996-2000 Chevrolet Tahoe
  • 1997-2000 GMC C3500 - Position: Front Right
  • 1996-2000 GMC K3500 - Position: Front Left
  • 2000-2002 Toyota Tundra - Position: Front Left
    • Cutting and Welding Required During Installation
  • 1996-1998 Toyota Tercel
    • Cutting and Welding Required During Installation
  • 1996-2000 Lexus SC400 - Position: Left
    • Cutting and Welding Required During Installation
  • 1996-1998 Toyota Paseo
    • Cutting and Welding Required During Installation
  • 1996-1996 Volkswagen EuroVan
    • Cutting and Welding Required During Installation
  • 2003-2006 Lincoln Town Car - Position: Rear Right
  • 1998-2000 Toyota RAV4 - Position: Rear
    • Cutting and Welding Required During Installation
  • 2001-2004 Ford Escape - Position: Rear
    • Cutting and Welding Required During Installation
  • 2001-2002 Jaguar S-Type - Position: Right
  • 1996-1999 Mercury Sable - Position: Front
    • Cutting and Welding Required During Installation
  • 1996-1998 Hyundai Sonata
    • Cutting and Welding Required During Installation
  • 2001-2003 Infiniti QX4 - Position: Left
    • Cutting and Welding Required During Installation
  • 1999-2005 Hyundai Sonata - Position: Rear
    • Cutting and Welding Required During Installation
  • 2001-2002 Jaguar S-Type - Position: Left
    • Cutting and Welding Required During Installation
  • 1996-1997 Land Rover Range Rover - Position: Right
  • 1996-1997 Mazda B2300
    • Cutting and Welding Required During Installation
  • 1996-2000 GMC C2500
    • Cutting and Welding Required During Installation
  • 1997-1998 Nissan 200SX
    • Cutting and Welding Required During Installation
  • 2004-2007 Ford Crown Victoria - Position: Rear Right
    • Cutting and Welding Required During Installation
  • 1996-1996 GMC Yukon
    • Cutting and Welding Required During Installation
  • 1996-1998 GMC K1500 Suburban
  • 1995-1997 Geo Metro - Position: Front
    • Federal Emissions Equipped Cutting and Welding Required During Installation
  • 2005-2010 Kia Sportage
    • Cutting and Welding Required During Installation
  • 1999-2002 Mercury Cougar - Position: Rear
    • Cutting and Welding Required During Installation
  • 2000-2004 Nissan Xterra - Position: Rear Right
  • 1996-1996 Mercury Tracer
    • Cutting and Welding Required During Installation
  • 2003-2003 Mazda Protege
    • Cutting and Welding Required During Installation
  • 1998-2001 Kia Sephia - Position: Rear
    • Cutting and Welding Required During Installation
Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Part Type:
Aftermarket
Features and Benefits:
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99004HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With high
Brand Description:
HM Grade Universal Catalytic Converter - 2.00in.
Meets or Exceeds Original Equipment Manufacture Specifications:
MagnaFlow HM Grade Federal / EPA Compliant Universal Catalytic Converter 99004HM
Short Description:
HM Grade
Inlet Type:
Weld-On
Outlet Type:
Weld-On
Air Tube Adaptable:
No
Body Shape:
Oval
Body Type:
Clam-Shell
Outlet Quantity:
1
Cut Type:
16
Edge Type:
5.5
Inlet Gasket Included:
12
Inlet Gasket Included:
No
Style:
3.75
Heat Shield Material:
Aluminized Steel
Clamps Included:
No
Outlet Diameter (MM):
2
Inlet Port Quantity:
2
Hangers Included:
No
Heat Shield Attached:
Yes
Life Cycle Status:
Available to Order
Sensor Port Count:
0
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Air Tube Count:
0
Item Level GTIN:
00841380031563
Outlet Gasket Included:
No
Quantity Per Application:
1
Inlet Quantity:
1
Outlet Orientation:
Straight
Inlet Orientation:
Straight
Tube Material:
Stainless Steel
Outlet Mounting Hardware Included:
No
Inlet Mounting Hardware Included:
No
Muffler Length Position Center (Inch):
No
Series:
HM Grade
Substrate Material:
Ceramic
Universal Or Specific Fit:
Universal
Finish:
Stainless Steel
Hazardous Material:
No
Minimum Order Quantity:
1
Body Material:
Stainless Steel
Weight - Each (Gross Pounds):
7.0000
Height - Each (Inch):
4.5000
Length - Each (Inch):
17.7500
Width - Each (Inch):
7.0000



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top