×
close

Shopping Cart:

Toggle menu
1-321-400-8080

24/7 Customer Service
0

$0.00

0
ACDelco 18FR1272 | Toyota Avalon Rear Left Disc Brake Caliper
click to zoom in

ACDelco 18FR1272 | Toyota Avalon Rear Left Disc Brake Caliper

(No reviews yet) Write a Review
$76.49
Part Number
ACD18FR1272
UPC:
00707773099698
Condition:
New
5 customers are viewing this product

video gallery

Description
ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers use both aluminum and iron castings, making them a high quality replacement for many vehicles on the road today. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. These friction ready disc brake calipers will provide the same performance, durability, and service life you expect from ACDelco. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
  • Developed without attached brake pads for customization
  • Pressure tested to ensure safe and confident braking
  • Toyota

SPECIFICS:

Bleeder Thread DiameterM7x1
Caliper ColorNatural
Caliper Slides IncludedYes
Caliper TypeFloating
Casting MaterialCast Iron
FAQ - Answer 1No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
FAQ - Answer 2Yes, ACDelco also offers GM OE disc brake calipers.
FAQ - Answer 3No, but it is a good idea to inspect them at every tire rotation.
FAQ - Question 1Do I have to replace all my brake parts when replacing my disc brake calipers?
FAQ - Question 2Does ACDelco offer other grades of disc brake calipers?
FAQ - Question 3Do I have to replace my disc brake calipers after a certain amount of time?
FinishPlain
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Grade TypePerformance
Height (in)6.7
Inlet Fitting TypeFemale
Length (in)9.5
Mounting Bracket IncludedYes
Mounting Hardware IncludedYes
Pad Wear Sensor IncludedNo
Pads IncludedNo
Piston 1 Diameter (in)1.4
Piston 1 Diameter (mm)35.6
Piston Quantity1
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bullet 5Brake pedal pulsation (not to be confused with normal ABS operation).
Weight (lb)6.1
Width (in)6.7

DOWNLOADS:

APPLICATIONS:

  • 1995-1996 Toyota Avalon - Position: Rear Left
Warranty Information
1-year Replacement unlimited-mileage warranty
Attributes
Part Type:
Aftermarket
Brand Description:
Rear Driver Side Brake Caliper
Product Description:
Rear Driver Side Disc Brake Caliper Assembly (Friction Ready Non-Coated)
Pad Wear Sensor Included:
No
Grade Type:
Performance
Mounting Hardware Included:
Yes
Programming Required:
No
Mounting Bracket Included:
Yes
Finish:
Plain
Inlet Fitting Type:
Female
Caliper Slides Included:
Yes
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
Features & Benefits - Bullet 3:
Developed without attached brake pads for customization
Features & Benefits - Bullet 1:
Pressure tested to ensure safe and confident braking
Weight (lb) (Pound):
6.1
Height (in) (Inch):
6.7
Width (in) (Inch):
6.7
Length (in) (Inch):
9.5
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Life Cycle Status:
Announced
FAQ - Answer 2:
Yes, ACDelco also offers GM OE disc brake calipers.
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
FAQ - Question 3:
Do I have to replace my disc brake calipers after a certain amount of time?
Item Level GTIN:
00707773099698
FAQ - Question 1:
Do I have to replace all my brake parts when replacing my disc brake calipers?
FAQ - Question 2:
Does ACDelco offer other grades of disc brake calipers?
FAQ - Answer 1:
No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
FAQ - Answer 3:
No, but it is a good idea to inspect them at every tire rotation.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Casting Material:
Cast Iron
Inlet Thread Diameter (Inch):
0.394
Piston Quantity:
1
Piston 1 Diameter (in) (Inch):
1.4
Inlet Thread Diameter (Millimeter):
10
Piston 1 Diameter (mm) (Millimeter):
35.6
Caliper Type:
Floating
Bleeder Thread Diameter:
M7x1
Caliper Color:
Natural
Pads Included:
No
Country of Origin:
United States
Weight - Each (Gross Pounds):
06.10
Weight - Case (Gross Pounds):
24.40
Height - Each (Inch):
06.70
Height - Case (Inch):
10.20
Length - Each (Inch):
09.50
Length - Case (Inch):
13.90
Width - Each (Inch):
06.70
Width - Case (Inch):
13.70



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top