×
close

Cardone 26-2619 | Toyota Sienna Rack and Pinion Assembly

(No reviews yet) Write a Review
$347.69
Part Number
CAD26-2619
UPC:
00082617685269
Condition:
New
5 customers are viewing this product
CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

BRAND: Cardone Reman

FEATURES:

  • Toyota Sienna 2010-04
  • Remanufactured Rack and Pinion Assembly
  • Rack and Pinion Assembly
  • Rack and Pinion, Rack and Pinion Complete Unit, Complete Rack, EPS
  • Rack and Pinion Assembly
  • Reman. Rack and Pinion Assembly

SPECIFICS:

Casting MaterialSteel/Aluminum
Distance Between Mounting Holes (in)19.13
Distance Between Mounting Holes (mm)485.78
E-WasteNo
FAQsFor the first few minutes of driving my car, the steering is hard. Is the rack and pinion bad or the power steering pump?
FAQsSteering not returning to center coming out of a turn. What could be causing this?
FAQsI replaced the rack and now the power steering pump is whining. What happened? It never did this before!
FAQsThis symptom is classified as "morning sickness". This condition is caused by Teflon sealing rings on the spool valve wearing grooves in the aluminum housing of the rack and pinion resulting in an internal bypass of pressure. Once the housing warms up, the metal will expand and reduce the pressure loss. The rack and pinion must be replaced.
FAQsThe most likely cause of power steering pump whine is air in the system. The Steering system must be bled completely.
FAQsThe rack and pinion does not return to center by itself. The geometry of the front suspension causes the wheels to return to center coming out of a turn. If the vehicle will not return to center, first, check the front end alignment, then, check for a restricted return line in the power steering system. If the return line is restricted or kinked, this could be blocking the flow of fluid back to the pump.
Features and BenefitsAs a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and BenefitsOur remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Features and BenefitsProtective coating applied to each unit to extend the life of the unit (where applicable).
Features and BenefitsRacks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
Features and Benefits100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable)
Features and Benefits100% performance testing to ensure perfect fit, function and reliable performance.
Features and BenefitsAll new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Features and BenefitsValve housings have polished micro-finish sleeves for durability (where applicable).
Features and Benefits100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Hose Port TypeO-Ring
Input Shaft Diameter (in)0.75
Input Shaft Diameter (mm)18.92
Input Shaft Length (in)5.786
Input Shaft Length (mm)146.96
Number of Mounting Holes2
Package ContentsRack and Pinion, Installation Kit, Instruction Sheet
Pressure Port Thread SizeM16 x 1.5
Product ConditionRemanufactured
Rack Length (in)46.75
Rack Length (mm)1187.45
Return Port Thread SizeM17 x 1.5
Steering Rack ColorBlack
Thread Length (in)2.00
Thread Length (mm)50.80
Tie Rod Ends IncludedInner
Total Turns Lock to Lock3.38

DOWNLOADS:

WARRANTY TIME: 36 Months

INTERCHANGE:

  • Toyota: 4425008040
  • Toyota: 4550309250
  • Toyota: 4425008041

APPLICATIONS:

  • 2004-2010 Toyota Sienna
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Features and Benefits:
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE&
Brand Description:
Rack and Pinion Assembly
Grade Type:
Regular
Hazardous Material:
No
Minimum Order Quantity:
1
Package Contents:
Rack and Pinion; Sealing Kit; Instruction Sheet
Installation Hardware Included:
No
Product Condition:
Remanufactured
E-Waste:
No
FAQs:
The most likely cause of power steering pump whine is air in the system. The Steering system must be bled completely.
FAQs:
Steering not returning to center coming out of a turn. What could be causing this?
FAQs:
I replaced the rack and now the power steering pump is whining. What happened? It never did this before!
FAQs:
For the first few minutes of driving my car, the steering is hard. Is the rack and pinion bad or the power steering pump?
Features and Benefits:
Finished in protective coating to prevent corrosion and rust.
Features and Benefits:
Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
Features and Benefits:
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Features and Benefits:
Application of specialized lubricant(s) for extended life.
Features and Benefits:
100% replacement of rubber sealing components.
Rack Length (in):
46.75
Steering Rack Color/Finish:
Black
Tie Rod Ends Included:
Yes
Life Cycle Status:
Available to Order
Total Turns Lock to Lock:
3.38
Life Cycle Status Description:
Available to Order - Part is released to customers for ordering.
Rack Length (mm):
1187.45
Item Level GTIN:
00082617685269
Distance Between Mounting Holes (in):
19.13
Quantity Per Application:
1
Distance Between Mounting Holes (mm):
485.77
Input Shaft Diameter (in):
0.75
Input Shaft Diameter (mm):
18.92
Input Shaft Length (in):
1.94
Input Shaft Length (mm):
49.21
Casting Material:
Steel; Aluminum
Mounting Brackets Included:
No
Gasket or Seal Included:
Yes
Outer Tie Rods Included:
No
Bellows Color:
Black
Steering Input Shaft Spline Quantity:
36
Number of Mounting Holes:
2
Short Description:
Rack and Pinion
Warranty:
Hydraulic
Country of Origin:
Mexico
Weight - Each (Gross Pounds):
23.4800
Height - Each (Inch):
6.5000
Length - Each (Inch):
48.7500
Width - Each (Inch):
10.2500



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top