| FAQ - Answer 1 | No, but it is a good idea to inspect your brake shoes at each tire rotation. |
| FAQ - Answer 2 | Yes, it is a good idea to inspect your brake fluid often. |
| FAQ - Answer 3 | No, but it is a good idea to inspect them for wear-out, cracking, leaking etc. |
| FAQ - Question 1 | Do I have to replace my brake shoes after a certain amount of time? |
| FAQ - Question 2 | Do I need to check my brake fluid when replacing other brake parts? |
| FAQ - Question 3 | Do I have to replace all my brake parts when replacing my brake shoes? |
| Friction Material Attachment | Bonded |
| Friction Material Composition | Semi-metallic |
| Good Maintenance Practices - Section 1 - Bullet 1 | Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations. |
| Good Maintenance Practices - Section 1 - Bullet 2 | Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required. |
| Good Maintenance Practices - Section 1 - Bullet 3 | Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary). |
| Good Maintenance Practices - Section 1 - Header | The following inspections and maintenance procedures can help prevent potential brake problems: |
| Good Maintenance Practices - Section 2 - Bullet 1 | Inspection of the brake hoses for brittleness or cracking. |
| Good Maintenance Practices - Section 2 - Bullet 2 | Inspection of brake lining and pads for wear or contamination by brake fluid or grease. |
| Good Maintenance Practices - Section 2 - Bullet 3 | Inspection of wheel bearings and grease seals. |
| Good Maintenance Practices - Section 2 - Bullet 4 | Parking brake adjustments (as needed). |
| Good Maintenance Practices - Section 2 - Header | The following should be conducted by a qualified technician: |
| Height (in) | 3.6 |
| Length (in) | 9.5 |
| Mounting Hardware Included | No |
| Programming Required | No |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 1 | Brake pedal pulsation (not to be confused with normal ABS operation). |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 2 | Squealing or grinding noises. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 3 | Low brake pedal height. |
| Signs of Wear & Troubleshooting - Section 1 - Bullet 4 | Vehicle pulls to the left or right when brakes are applied. |
| Signs of Wear & Troubleshooting - Section 1 - Header | Brake shoe signs of wear include: |
| Weight (lb) | 5.2 |
ACDelco
Bonded Rear Parking Brake ShoeBRAND: ACDelcoFEATURES:Abs Components;Brake;Brake Caliper;Brake Caliper Lubricant;brake care;Brake Fluid;Brake Pad;Brake Parts;Brake Rotor;Brake Shoe;brakes...
ACDelco
ACDelco Professional Parking Brake Shoe is a high quality aftermarket replacement component for one or more of the following vehicle systems: brake. This premium aftermarket shoe is manufactured to...
ACDelco
ACDelco Parking Brake Shoes are high-quality replacements for worn factory shoes. These bonded brakes deliver strong braking power while reducing noise and vibration. The chamfer angle and vane...
ACDelco
ACDelco Professional Parking Brake Shoes are a high quality replacement for many vehicles on the road today. For GM vehicle application, the chamfer angle and vane configuration follow the OE design...
ACDelco
Bonded Rear Parking Brake Shoe SetBRAND: ACDelcoFEATURES:Rear Parking Brake Shoe SetAbs Components;Brake;Brake Caliper;Brake Caliper Lubricant;brake care;Brake Fluid;Brake Pad;Brake Parts;Brake...
ACDelco
ACDelco Professional Parking Brake Shoes are a high quality replacement for many vehicles on the road today. For GM vehicle application, the chamfer angle and vane configuration follow the OE design...
