×
close
click to zoom in

ACDelco 14791b | Rear Parking Brake Shoe

(No reviews yet) Write a Review
$33.99
Part Number
ACD14791B
UPC:
00707773853207
Condition:
New
5 customers are viewing this product
ACDelco Parking Brake Shoes are high-quality replacements for worn factory shoes. These bonded brakes deliver strong braking power while reducing noise and vibration. The chamfer angle and vane configuration follow the OE design. Also no machining is required. ACDelco Advantage Parking Brake Shoes are ready to be installed right out of the box. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Available in riveted and bonded for various vehicle applications
  • Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
  • Ford;Lincoln;Mercury
  • Non-directional brake surface finish for consistent braking
  • Quality validated for proper metallurgy and correct brake plate thickness

SPECIFICS:

FAQ - Answer 1No, but it is a good idea to inspect your brake shoes at each tire rotation.
FAQ - Answer 2Yes, it is a good idea to inspect your brake fluid often.
FAQ - Answer 3No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
FAQ - Question 1Do I have to replace my brake shoes after a certain amount of time?
FAQ - Question 2Do I need to check my brake fluid when replacing other brake parts?
FAQ - Question 3Do I have to replace all my brake parts when replacing my brake shoes?
Friction Material AttachmentBonded
Friction Material CompositionSemi-metallic
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems:
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Height (in)5
Length (in)9.8
Mounting Hardware IncludedNo
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Squealing or grinding noises.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Low brake pedal height.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake shoe signs of wear include:
Weight (lb)2.9

DOWNLOADS:

APPLICATIONS:

  • 2007-2010 Ford Explorer Sport Trac - Position: Rear
    • Superseded by 17791B
  • 2008-2010 Mercury Mountaineer - Position: Rear
    • Superseded by 17791B
  • 2002-2010 Ford Explorer - Position: Rear
    • Superseded by 17791B
  • 2002-2007 Mercury Mountaineer - Position: Rear
    • with 184mm x 32mm Brakes Superseded by 17791B
  • 2003-2005 Lincoln Aviator - Position: Rear
    • Superseded by 17791B
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Brand Description:
Rear Parking Brake Shoe
Product Description:
Bonded Rear Parking Brake Shoe
Friction Material Attachment:
Bonded
Friction Material Composition:
Semi-Metallic
Mounting Hardware Included:
No
Programming Required:
No
Width (Inch):
1.26
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Quality validated for proper metallurgy and correct brake plate thickness
Features & Benefits - Bullet 4:
Available in riveted and bonded for various vehicle applications
Features & Benefits - Bullet 3:
Non-directional brake surface finish for consistent braking
Features & Benefits - Bullet 1:
Basic shims, slots, and chamfers help to diminish noise, vibration, and braking harshness
Weight (lb) (Pound):
2.9
Height (in) (Inch):
5
Length (in) (Inch):
9.8
Signs of Wear & Troubleshooting - Section 1 - Bull:
Vehicle pulls to the left or right when brakes are applied.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Squealing or grinding noises.
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake pedal pulsation (not to be confused with normal ABS operation).
Signs of Wear & Troubleshooting - Section 1 - Bull:
Low brake pedal height.
FAQ - Answer 2:
Yes, it is a good idea to inspect your brake fluid often.
Life Cycle Status:
Superseded
FAQ - Question 3:
Do I have to replace all my brake parts when replacing my brake shoes?
Life Cycle Status Description:
Superseded - Part is being replaced by the surviving part number.
FAQ - Question 1:
Do I have to replace my brake shoes after a certain amount of time?
Item Level GTIN:
00707773853207
FAQ - Question 2:
Do I need to check my brake fluid when replacing other brake parts?
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake shoe signs of wear include:
FAQ - Answer 1:
No, but it is a good idea to inspect your brake shoes at each tire rotation.
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
FAQ - Answer 3:
No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems:
Width (Millimeter):
32.2
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Country of Origin:
China
Weight - Each (Gross Pounds):
02.90
Weight - Case (Gross Pounds):
14.50
Height - Each (Inch):
05.00
Height - Case (Inch):
25.10
Length - Each (Inch):
09.80
Length - Case (Inch):
09.70
Width - Each (Inch):
09.10
Width - Case (Inch):
09.20



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top