×
close
click to zoom in

ACDelco 172-1425 | Rear Drum Brake Wheel Cylinder

(No reviews yet) Write a Review
$54.39
Part Number
ACD172-1425
UPC:
00707773551455
Condition:
New
5 customers are viewing this product
ACDelco GM Original Equipment Drum Brake Wheel Cylinder is pressure tested to ensure safe, confident braking and is the GM recommended replacement for your vehicle's original components. This original equipment drum brake wheel cylinders has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors. ? WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov

BRAND: ACDelco

FEATURES:

  • Cadillac;Chevrolet;GMC;Oldsmobile
  • GM-recommended replacement part for your GM vehicle's original factory component
  • Manufactured with GM Original Equipment specification for fit, form, and function
  • Offering the quality, reliability, and durability of GM OE

SPECIFICS:

Attachment TypeBolted
Bleeder Screw Cap IncludedYes
Bleeder Screw IncludedYes
Good Maintenance Practices - Section 1 - Bullet 1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - HeaderThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - Section 2 - Bullet 1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - Section 2 - Bullet 2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - HeaderThe following should be conducted by a qualified technician:
Meets or Exceeds Original Equipment Manufacture SpecificationsYes
Mount Hole Quantity2
Mounting Hardware IncludedNo
Programming RequiredNo
Signs of Wear & Troubleshooting - Section 1 - Bullet 1Brake warning light is on.
Signs of Wear & Troubleshooting - Section 1 - Bullet 2Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Signs of Wear & Troubleshooting - Section 1 - Bullet 3Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - Section 1 - Bullet 4A low or sinking brake pedal.
Signs of Wear & Troubleshooting - Section 1 - HeaderBrake cylinder signs of wear include:

DOWNLOADS:

APPLICATIONS:

  • 1991-1991 Chevrolet K1500 - Position: Rear
    • HVY DUTY CHAS(F44), Hydraulic Power Brakes
  • 1992-1993 Chevrolet Blazer - Position: Rear
    • Hydraulic Power Brakes
  • 1996-1997 GMC C2500 Suburban - Position: Rear
    • Hydraulic Power Brakes
  • 1998-1998 Chevrolet C2500 - Position: Rear
    • 7,200 LB GVWR(C5Z), 3.73R(GT4), POSITRACTION L/SLIP R/AXL(G80), Hydraulic Power Brakes
  • 1994-1995 GMC C2500 Suburban - Position: Rear
    • Vacuum Power Brakes
  • 1998-1998 GMC Yukon - Position: Rear
    • Vacuum Power Brakes, POLICE PKG(Z56)
  • 1992-1999 Chevrolet C1500 - Position: Rear
  • 1996-1996 GMC C1500 - Position: Rear
    • Vacuum Power Brakes
  • 1992-1992 Chevrolet C1500 - Position: Rear
    • Hydraulic Power Brakes
  • 1993-1994 Chevrolet C1500 Suburban - Position: Rear
    • Hydraulic Power Brakes
  • 1999-1999 GMC Yukon - Position: Rear
    • Vacuum Power Brakes
  • 1993-1994 Chevrolet C1500 - Position: Rear
    • Vacuum Power Brakes
  • 1992-1998 GMC C2500 - Position: Rear
  • 1992-1993 GMC K1500 - Position: Rear
    • Hydraulic Power Brakes
  • 1995-1995 GMC K2500 Suburban - Position: Rear
    • Vacuum Power Brakes
  • 1991-1991 GMC K1500 - Position: Rear
    • HVY DUTY CHAS(F44), Vacuum Power Brakes
  • 1995-1997 GMC Yukon - Position: Rear
    • Vacuum Power Brakes
  • 1996-2000 GMC Savana 3500 - Position: Rear
    • Hydraulic Power Brakes
  • 1994-1994 GMC K2500 - Position: Rear
    • Hydraulic Power Brakes
  • 1993-1997 Chevrolet K2500 Suburban - Position: Rear
    • Hydraulic Power Brakes
  • 1992-1997 Chevrolet C2500 Suburban - Position: Rear
    • Hydraulic Power Brakes
  • 1999-1999 Cadillac Escalade - Position: Rear
    • Vacuum Power Brakes
  • 1993-1996 Cadillac Fleetwood - Position: Rear
    • Heavy Duty Brakes
  • 1992-1994 GMC K2500 Suburban - Position: Rear
    • Hydraulic Power Brakes
  • 1997-1997 Chevrolet C2500 - Position: Rear
    • Vacuum Power Brakes
  • 1999-1999 Chevrolet C1500 - Position: Rear
    • Vacuum Power Brakes
  • 1992-1999 GMC C1500 - Position: Rear
  • 1995-1996 Chevrolet C2500 - Position: Rear
    • Hydraulic Power Brakes
  • 1999-1999 Chevrolet C1500 Suburban - Position: Rear
    • Hydraulic Power Brakes
  • 1989-1990 Chevrolet K1500 - Position: Rear
    • HVY DUTY CHAS(F44), Vacuum Power Brakes
  • 1992-1992 Chevrolet C1500 Suburban - Position: Rear
    • Vacuum Power Brakes
  • 1995-1998 Chevrolet C1500 Suburban - Position: Rear
    • Vacuum Power Brakes
  • 1988-1999 GMC K1500 - Position: Rear
  • 1998-1998 Chevrolet C2500 Suburban - Position: Rear
    • 7,200 LB GVWR(C5Z), 3.73R(GT4), POSITRACTION L/SLIP R/AXL(G80), Hydraulic Power Brakes
  • 1996-2000 GMC Savana 3500 - Position: Rear
    • SINGLE RR WHL(R04)
  • 1992-1999 GMC C1500 Suburban - Position: Rear
  • 1998-1999 Chevrolet Tahoe - Position: Rear
    • Vacuum Power Brakes, POLICE PKG(Z56)
  • 1999-1999 Chevrolet K1500 - Position: Rear
    • Hydraulic Power Brakes
  • 1994-1999 GMC K1500 - Position: Rear
    • Vacuum Power Brakes
  • 1995-1999 Chevrolet C1500 - Position: Rear
    • Hydraulic Power Brakes
  • 1993-1994 Chevrolet C2500 - Position: Rear
    • Vacuum Power Brakes
  • 1994-1994 Chevrolet Blazer - Position: Rear
    • Vacuum Power Brakes
  • 1992-1994 Chevrolet Blazer - Position: Rear
  • 1999-1999 GMC C1500 Suburban - Position: Rear
    • Vacuum Power Brakes, POLICE PKG(Z56)
  • 1998-1998 GMC C2500 Suburban - Position: Rear
    • 7,200 LB GVWR(C5Z), 3.73R(GT4), POSITRACTION L/SLIP R/AXL(G80), Hydraulic Power Brakes
  • 1988-1991 GMC K2500 - Position: Rear
    • 7,200 LB GVWR(C5Z) 9.50 DIA R/GR, 11.15 X 2.75 BRKS
  • 1992-1999 Chevrolet C1500 Suburban - Position: Rear
  • 1993-1993 GMC K2500 - Position: Rear
    • Vacuum Power Brakes
  • 1992-1993 GMC C1500 - Position: Rear
    • Vacuum Power Brakes
  • 1992-1992 GMC K2500 - Position: Rear
    • Hydraulic Power Brakes
  • 1997-1997 GMC C1500 - Position: Rear
    • Hydraulic Power Brakes
  • 1994-1995 GMC C1500 - Position: Rear
    • Hydraulic Power Brakes
  • 1995-2000 Chevrolet Tahoe - Position: Rear
  • 1995-1996 GMC C2500 - Position: Rear
    • Hydraulic Power Brakes
  • 1992-1998 Chevrolet K2500 - Position: Rear
  • 1993-1998 GMC C1500 Suburban - Position: Rear
    • Hydraulic Power Brakes
  • 1988-1991 GMC C2500 - Position: Rear
    • 7,200 LB GVWR(C5Z) 9.50 DIA R/GR, 11.15 X 2.75 BRKS
  • 1997-1997 Chevrolet Blazer - Position: Rear
    • 3.73R(GT4), POSITRACTION L/SLIP R/AXL(G80) 11 X 2 BRK
  • 1989-1990 GMC K1500 - Position: Rear
    • HVY DUTY CHAS(F44), Hydraulic Power Brakes
  • 1999-1999 GMC Yukon - Position: Rear
    • Vacuum Power Brakes, CHASSIS PERFORMANCE PKG(Z60)
  • 1988-1991 Chevrolet K2500 - Position: Rear
    • 7,200 LB GVWR(C5Z) 9.50 DIA R/GR, 11.15 X 2.75 BRKS
  • 1993-1996 Cadillac Commercial Chassis - Position: Rear
    • Heavy Duty Brakes
  • 1995-1997 GMC K1500 Suburban - Position: Rear
    • Vacuum Power Brakes
  • 1993-1993 GMC C2500 Suburban - Position: Rear
    • Hydraulic Power Brakes
  • 1992-2000 GMC Yukon - Position: Rear
  • 1999-1999 GMC K1500 Suburban - Position: Rear
    • Vacuum Power Brakes
  • 1992-1998 Chevrolet C2500 - Position: Rear
  • 1999-1999 Chevrolet Tahoe - Position: Rear
    • Vacuum Power Brakes, CHASSIS PERFORMANCE PKG(Z60)
  • 1999-2000 Chevrolet Tahoe - Position: Rear
    • Hydraulic Power Brakes
  • 1996-2000 Chevrolet Express 3500 - Position: Rear
    • SINGLE RR WHL(R04)
  • 1992-1998 GMC K2500 Suburban - Position: Rear
  • 1992-1992 GMC C1500 Suburban - Position: Rear
    • Vacuum Power Brakes
  • 1997-1997 GMC Jimmy - Position: Rear
    • 3.73R(GT4), POSITRACTION L/SLIP R/AXL(G80) 11 X 2 BRK
  • 1992-1999 GMC K1500 Suburban - Position: Rear
  • 1998-1998 GMC Yukon - Position: Rear
    • Hydraulic Power Brakes
  • 1996-2000 Chevrolet Express 2500 - Position: Rear
    • Hydraulic Power Brakes
  • 1998-1998 GMC K2500 - Position: Rear
    • Hydraulic Power Brakes
  • 1999-2000 Cadillac Escalade - Position: Rear
  • 1992-1998 GMC C2500 Suburban - Position: Rear
  • 1992-1992 GMC C2500 Suburban - Position: Rear
    • Vacuum Power Brakes
  • 1997-1998 Chevrolet K2500 - Position: Rear
    • Vacuum Power Brakes
  • 1992-1994 GMC K1500 Suburban - Position: Rear
    • Hydraulic Power Brakes
  • 1992-1992 Chevrolet K2500 - Position: Rear
    • Hydraulic Power Brakes
  • 1992-1992 Chevrolet K1500 Suburban - Position: Rear
    • Vacuum Power Brakes
  • 1992-1994 GMC Yukon - Position: Rear
    • Hydraulic Power Brakes
  • 1992-1998 Chevrolet K2500 Suburban - Position: Rear
  • 1988-1999 Chevrolet K1500 - Position: Rear
  • 1998-1998 Chevrolet K2500 Suburban - Position: Rear
    • Vacuum Power Brakes
  • 1988-1988 Chevrolet K1500 - Position: Rear
    • HVY DUTY CHAS(F44), Hydraulic Power Brakes
  • 1994-1999 Chevrolet K1500 Suburban - Position: Rear
    • Vacuum Power Brakes
  • 1993-1993 Chevrolet K1500 Suburban - Position: Rear
    • Hydraulic Power Brakes
  • 1996-2000 Chevrolet Express 3500 - Position: Rear
    • Hydraulic Power Brakes
  • 1997-1997 Oldsmobile Bravada - Position: Rear
    • 3.73R(GT4), POSITRACTION L/SLIP R/AXL(G80) 11 X 2 BRK
  • 1994-1996 Chevrolet K2500 - Position: Rear
    • Hydraulic Power Brakes
  • 1995-1997 GMC K2500 - Position: Rear
    • Vacuum Power Brakes
  • 1998-1998 GMC K1500 Suburban - Position: Rear
    • Hydraulic Power Brakes
  • 2000-2000 GMC Yukon - Position: Rear
    • Hydraulic Power Brakes
  • 1992-1998 GMC K2500 - Position: Rear
  • 1992-1998 Chevrolet C2500 Suburban - Position: Rear
  • 1997-1998 GMC C2500 - Position: Rear
    • Vacuum Power Brakes
  • 2000-2000 Cadillac Escalade - Position: Rear
    • Hydraulic Power Brakes
  • 1997-1999 Chevrolet K1500 - Position: Rear
    • Vacuum Power Brakes
  • 1992-1996 Chevrolet K1500 - Position: Rear
    • Hydraulic Power Brakes
  • 1996-1998 GMC K2500 Suburban - Position: Rear
    • Hydraulic Power Brakes
  • 1988-1988 GMC K1500 - Position: Rear
    • HVY DUTY CHAS(F44), Vacuum Power Brakes
  • 1996-2000 GMC Savana 2500 - Position: Rear
    • Hydraulic Power Brakes
  • 1999-1999 GMC C1500 - Position: Rear
    • Hydraulic Power Brakes
  • 1992-1992 Chevrolet K2500 Suburban - Position: Rear
    • Vacuum Power Brakes
  • 1988-1991 Chevrolet C2500 - Position: Rear
    • 7,200 LB GVWR(C5Z) 9.50 DIA R/GR, 11.15 X 2.75 BRKS
  • 1998-1999 GMC C1500 - Position: Rear
    • Vacuum Power Brakes
  • 1991-1992 Cadillac Brougham - Position: Rear
    • Heavy Duty Brakes
  • 1992-1999 Chevrolet K1500 Suburban - Position: Rear
  • 1993-1993 Chevrolet K2500 - Position: Rear
    • Vacuum Power Brakes
  • 1992-1992 Chevrolet C2500 - Position: Rear
    • Hydraulic Power Brakes
  • 1992-1994 GMC C2500 - Position: Rear
    • Vacuum Power Brakes
  • 1995-2000 Chevrolet Tahoe - Position: Rear
    • Vacuum Power Brakes
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Brand Description:
Rear Brake Wheel Cylinder
Product Description:
Rear Drum Brake Wheel Cylinder
Mounting Hardware Included:
No
Programming Required:
No
Attachment Type:
Bolted
Bore Diameter (Inch):
1
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3:
Manufactured with GM Original Equipment specification for fit, form, and function
Features & Benefits - Bullet 1:
GM-recommended replacement part for your GM vehicle's original factory component
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake warning light is on
Signs of Wear & Troubleshooting - Section 1 - Bull:
Fluid spots beneath the car, indicating there may be a leak within the cylinder
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake cylinder signs of wear include:
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Life Cycle Status:
Announced
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Item Level GTIN:
00707773551455
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Mount Hole Quantity:
2
Bleeder Screw Included:
Yes
Brake Line Inlet Thread Diameter (Inch):
0.375
Brake Line Inlet Thread Diameter (Millimeter):
9.525
Bore Diameter (Millimeter):
25.4
Bleeder Screw Cap Included:
Yes
Country of Origin:
Germany
Weight - Each (Gross Pounds):
01.35
Weight - Case (Gross Pounds):
27.00
Height - Each (Inch):
03.60
Height - Case (Inch):
04.30
Length - Each (Inch):
03.40
Length - Case (Inch):
22.30
Width - Each (Inch):
04.40
Width - Case (Inch):
14.60



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top