×
close
click to zoom in

ACDelco 172-1557 | Rear Drum Brake Wheel Cylinder

(No reviews yet) Write a Review
$55.24
Part Number
ACD172-1557
UPC:
00036666095654
Condition:
New
5 customers are viewing this product
Rear Drum Brake Wheel Cylinder

BRAND: ACDelco

FEATURES:

  • Rear Brake Wheel Cylinder
  • Abs Components;Brake;Brake Caliper;Brake Caliper Lubricant;brake care;Brake Fluid;Brake Pad;Brake Parts;Brake Rotor;Brake Shoe;brakes care;Caliper;Drums;Durastop Brake Pads;Durastop Brake Parts;Durastop Ceramic Brake Pads;Low Voc Brake Parts Cleaner 15oz;Low Voc Brake Parts Cleaner 16oz;luxury hybrid brake pads;oem Brakes;Pads And Shoes;Rotor;Silicone Brake Lubricant

SPECIFICS:

ACD_RemanDesNo
AltPA_6385_mm10
AltPA_6712
AltPA_905_mm21.2
Attachment TypeBolted
Bleeder Screw Cap IncludedNO
Bleeder Screw IncludedYes
Bore Diameter.8346457
Brake Line Inlet Thread Diameter.3937
Features & Benefits - B1GM-recommended replacement part for your GM vehicle's original factory component
Features & Benefits - B2Offering the quality, reliability, and durability of GM OE
Features & Benefits - B3Manufactured with GM Original Equipment specification for fit, form, and function
Good Maintenance Practices - S1 B1Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - S1 B2Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - S1 B3Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - S1 B4Check the thickness of your brake pads.
Good Maintenance Practices - S1 HThe following inspections and maintenance procedures can help prevent potential brake problems.
Good Maintenance Practices - S2 B1Inspection of the brake hoses for brittleness or cracking.
Good Maintenance Practices - S2 B2Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - S2 B3Inspection of wheel bearings and grease seals.
Good Maintenance Practices - S2 B4Parking brake adjustments (as needed).
Good Maintenance Practices - S2 HThe following should be conducted by a qualified technician:
Marketing Statement - Product LineGet the GM quality you know and trust with ACDelco GM Original Equipment Brakes. Stay with the parts brand your GM vehicle came with and get peace of mind that the fit, form, and function is up to the high standards and specifications of General Motors. ACDelco GM Original Equipment Brakes are engineered for virtually every make and model of GM car, light duty truck, and sport utility vehicle.
Mkt_State_Warranty_CA36 Months/60,000 KM (Parts Only). Please see ACDelcocanada.com for more details.
Mkt_State_Warranty_US24 Month / Unlimited Mile Limited Warranty (Parts Only). Please see ACDelco.com for more details.
Mounting Hardware IncludedNo
Product DescriptionACDelco GM Original Equipment Drum Brake Wheel Cylinder is pressure tested to ensure safe, confident braking and is the GM recommended replacement for your vehicle's original components. This original equipment drum brake wheel cylinders has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Programming RequiredNO
Signs of Wear & Troubleshooting - S1 B1Brake warning light is on.
Signs of Wear & Troubleshooting - S1 B2Fluid spots beneath the car, indicating there may be a leak within the cylinder.
Signs of Wear & Troubleshooting - S1 B3Difficulty stopping the vehicle.
Signs of Wear & Troubleshooting - S1 B4A low or sinking brake pedal.
Signs of Wear & Troubleshooting - S1 HBrake cylinder signs of wear include:
Vintage_Part_IndicatorN

DOWNLOADS:

APPLICATIONS:

  • 2004-2005 Chevrolet Classic - Position: Rear
  • 1997-2003 Chevrolet Malibu - Position: Rear
  • 1997-1999 Oldsmobile Cutlass - Position: Rear
  • 1999-2005 Pontiac Grand Am - Position: Rear
  • 2003-2004 Oldsmobile Alero - Position: Rear
1-year Replacement unlimited-mileage warranty
Part Type:
Aftermarket
Brand Description:
Rear Brake Wheel Cylinder
Product Description:
Rear Drum Brake Wheel Cylinder
Mounting Hardware Included:
No
Programming Required:
No
Attachment Type:
Bolted
Bore Diameter (Inch):
0.8346457
Hazardous Material:
No
Minimum Order Quantity:
1
Features & Benefits - Bullet 2:
Offering the quality, reliability, and durability of GM OE
Features & Benefits - Bullet 3:
Manufactured with GM Original Equipment specification for fit, form, and function
Features & Benefits - Bullet 1:
GM-recommended replacement part for your GM vehicle's original factory component
Signs of Wear & Troubleshooting - Section 1 - Bull:
A low or sinking brake pedal
Signs of Wear & Troubleshooting - Section 1 - Bull:
Difficulty stopping the vehicle
Signs of Wear & Troubleshooting - Section 1 - Bull:
Brake warning light is on
Signs of Wear & Troubleshooting - Section 1 - Bull:
Fluid spots beneath the car, indicating there may be a leak within the cylinder
Signs of Wear & Troubleshooting - Section 1 - Head:
Brake cylinder signs of wear include:
Good Maintenance Practices - Section 1 - Bullet 1:
Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
Good Maintenance Practices - Section 1 - Bullet 2:
Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
Good Maintenance Practices - Section 1 - Bullet 3:
Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
Good Maintenance Practices - Section 1 - Bullet 4:
Check the thickness of your brake pads.
Good Maintenance Practices - Section 1 - Header:
The following inspections and maintenance procedures can help prevent potential brake problems.
Life Cycle Status:
Announced
Meets or Exceeds Original Equipment Manufacture Sp:
Yes
Life Cycle Status Description:
Announced - Part has been announced to customers on a paper “New Number Announcement”. Part is active.
Good Maintenance Practices - Section 2 - Bullet 1:
Inspection of the brake hoses for brittleness or cracking.
Item Level GTIN:
00036666095654
Good Maintenance Practices - Section 2 - Bullet 2:
Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
Good Maintenance Practices - Section 2 - Bullet 3:
Inspection of wheel bearings and grease seals.
Good Maintenance Practices - Section 2 - Bullet 4:
Parking brake adjustments (as needed).
Good Maintenance Practices - Section 2 - Header:
The following should be conducted by a qualified technician:
Mount Hole Quantity:
2
Bleeder Screw Included:
Yes
Brake Line Inlet Thread Diameter (Inch):
0.3937
Brake Line Inlet Thread Diameter (Millimeter):
10
Bore Diameter (Millimeter):
21.2
Bleeder Screw Cap Included:
No
Country of Origin:
Italy
Weight - Each (Gross Pounds):
01.10
Height - Each (Inch):
03.25
Length - Each (Inch):
04.75
Width - Each (Inch):
03.25



Need help? We're available at1-321-400-8080 - Email us atinfo@partsonnet.net orlive help
to top